Low cycle fatigue lives of Sn-37Pb and Sn-3.5Ag solders at low temperatures

被引：5
|
作者：
Hiyoshi, Noritake [1 ]
Katoh, Akihisa [2 ]
Sakane, Masao [3 ]
Tsukada, Yutaka [4 ]
机构：
[1] Dept. of Mech. Eng., Ishikawa National College of Tech., Kahoku-gun, Ishikawa 929-0392, Japan
[2] Ishikawa National College of Tech., Kahoku-gun, Ishikawa 929-0392, Japan
[3] Dept of Mech. Eng., Ritsumeikan Univ., Noji-higashi, Kusats 525-8577, Japan
[4] KYOCERA SLC Technologies Corporation, Ichimiyake, Yasu 520-2362, Japan
来源：
Zairyo/Journal of the Society of Materials Science, Japan | 2009年 / 58卷 / 02期
关键词：
Lead alloys - Stress-strain curves - Tin alloys - Fatigue testing - Low-cycle fatigue - Silver alloys - Binary alloys - Temperature - Strain energy;
D O I：
10.2472/jsms.58.155
中图分类号：
学科分类号：
摘要：
This paper describes low cycle fatigue lives of Sn-37Pb and Sn-3.5Ag solders at low temperatures. Push-pull low cycle fatigue tests were carried out at 253K and 273K to study the temperature effect on low cycle fatigue life. Plastic strain range was a suitable parameter for correlating the low cycle fatigue lives for the Sn-37Pb solder at the four temperatures but it was not for the Sn-3.5Ag solder. Strain energy parameter which is defined as the product of strain and stress ranges was a suitable parameter for the Sn-3.5Ag solder. Application of universal slope method was also discussed for predicting the low cycle fatigue lives of Sn-37Pb and Sn-3.5Ag solders. © 2009 The Society of Materials Science, Japan.
引用
收藏
页码：155 / 161
相关论文
共 50 条
  • [1] Miniature creep testing for Sn-37Pb and Sn-3.5Ag solders
    Takada, Akio
    Sakane, Masao
    Tsukada, Yutaka
    Proceedings of the ASME Materials Division, 2005, 100 : 265 - 269
  • [2] Effect of cooling rate on microstructure and shear strength of pure Sn, Sn-0.7Cu, Sn-3.5Ag, and Sn-37Pb solders
    Maveety, JG
    Liu, P
    Vijayen, J
    Hua, F
    Sanchez, EA
    JOURNAL OF ELECTRONIC MATERIALS, 2004, 33 (11) : 1355 - 1362
  • [3] Effect of cooling rate on microstructure and shear strength of pure Sn, Sn-0.7Cu, Sn-3.5Ag, and Sn-37Pb solders
    J. G. Maveety
    P. Liu
    J. Vijayen
    F. Hua
    E. A. Sanchez
    Journal of Electronic Materials, 2004, 33 : 1355 - 1362
  • [4] Solid state interfacial reaction of Sn-37Pb and Sn-3.5Ag solders with Ni-P under bump metallization
    He, M
    Chen, Z
    Qi, GJ
    ACTA MATERIALIA, 2004, 52 (07) : 2047 - 2056
  • [5] Notch effect on low cycle fatigue of Sn-3.5Ag solder
    Nozaki, Mineo
    Sakane, Masao
    Tsukada, Yutaka
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2008, 130 (01): : 0110011 - 0110017
  • [6] Crack propagation behavior of Sn-3.5Ag solder in low cycle fatigue
    Nozaki, Mineo
    Sakane, Masao
    Tsukada, Yutaka
    INTERNATIONAL JOURNAL OF FATIGUE, 2008, 30 (10-11) : 1729 - 1736
  • [7] Interfacial reactions and joint strength of Sn-37Pb and Sn-3.5Ag solders with immersion Ag-plated Cu substrate during aging at 150 °C
    School of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon, Gyeonggi-do 440-746, Korea, Republic of
    不详
    J Mater Res, 2006, 12 (3196-3204):
  • [8] Interfacial reactions and joint strength of Sn-37Pb and Sn-3.5Ag solders with immersion Ag-plated Cu substrate during aging at 150 °C
    Yoon, Jeong-Won
    Lim, Jun Hyung
    Lee, Hoo-Jeong
    Joo, Jinho
    Jung, Seung-Boo
    Moon, Won-Chul
    JOURNAL OF MATERIALS RESEARCH, 2006, 21 (12) : 3196 - 3204
  • [9] An evaluation of low-cycle fatigue property for Sn-3.5Ag and Sn-0.7Cu lead-free solders using surface deformation
    Takahashi, Takehiko
    Hioki, Susumu
    Shohji, Ikuo
    Kamiya, Osamu
    EXPERIMENTAL MECHANICS IN NANO AND BIOTECHNOLOGY, PTS 1 AND 2, 2006, 326-328 : 1035 - +
  • [10] Interfacial reactions of liquid Sn and Sn-3.5Ag solders with Ag thick films
    T. L. Su
    L. C. Tsao
    S. Y. Chang
    T. H. Chuang
    Journal of Materials Engineering and Performance, 2002, 11 : 481 - 486
12345