Low cycle fatigue lives of Sn-37Pb and Sn-3.5Ag solders at low temperatures

被引：5
|
作者：
Hiyoshi, Noritake [1 ]
Katoh, Akihisa [2 ]
Sakane, Masao [3 ]
Tsukada, Yutaka [4 ]
机构：
[1] Dept. of Mech. Eng., Ishikawa National College of Tech., Kahoku-gun, Ishikawa 929-0392, Japan
[2] Ishikawa National College of Tech., Kahoku-gun, Ishikawa 929-0392, Japan
[3] Dept of Mech. Eng., Ritsumeikan Univ., Noji-higashi, Kusats 525-8577, Japan
[4] KYOCERA SLC Technologies Corporation, Ichimiyake, Yasu 520-2362, Japan
来源：
Zairyo/Journal of the Society of Materials Science, Japan | 2009年 / 58卷 / 02期
关键词：
Lead alloys - Stress-strain curves - Tin alloys - Fatigue testing - Low-cycle fatigue - Silver alloys - Binary alloys - Temperature - Strain energy;
D O I：
10.2472/jsms.58.155
中图分类号：
学科分类号：
摘要：
This paper describes low cycle fatigue lives of Sn-37Pb and Sn-3.5Ag solders at low temperatures. Push-pull low cycle fatigue tests were carried out at 253K and 273K to study the temperature effect on low cycle fatigue life. Plastic strain range was a suitable parameter for correlating the low cycle fatigue lives for the Sn-37Pb solder at the four temperatures but it was not for the Sn-3.5Ag solder. Strain energy parameter which is defined as the product of strain and stress ranges was a suitable parameter for the Sn-3.5Ag solder. Application of universal slope method was also discussed for predicting the low cycle fatigue lives of Sn-37Pb and Sn-3.5Ag solders. © 2009 The Society of Materials Science, Japan.
引用
收藏
页码：155 / 161
相关论文
共 50 条
  • [21] Creep rupture of lead-free Sn-3.5Ag and Sn-3.5Ag-0.5Cu solders
    Lin, CK
    Chu, DY
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2005, 16 (06) : 355 - 365
  • [22] Tensile properties of Sn-3.5Ag and Sn-3.5Ag-0.75Cu lead-free solders
    Shohji, I
    Yoshida, T
    Takahashi, T
    Hioki, S
    MATERIALS TRANSACTIONS, 2002, 43 (08) : 1854 - 1857
  • [23] Metallurgical reaction of the Sn-3.5Ag solder and Sn-37Pb solder with Ni/Cu under-bump metallization in a flip-chip package
    Huang, CS
    Duh, JG
    Chen, YM
    JOURNAL OF ELECTRONIC MATERIALS, 2003, 32 (12) : 1509 - 1514
  • [24] Using nanoindentation to investigate the temperature cycling of Sn-37Pb solders
    Wen, Hua-Chiang
    Chou, Wu-Ching
    Lin, Po-Chen
    Jeng, Yeau-Ren
    Chen, Chien-Chang
    Chen, Hung-Ming
    Jiang, Don Son
    Cheng, Chun-Hu
    MICROELECTRONICS RELIABILITY, 2017, 78 : 111 - 117
  • [25] Metallurgical reaction of the Sn-3.5Ag solder and Sn-37Pb solder with Ni/Cu under-bump metallization in a flip-chip package
    Chien-Sheng Huang
    Jenq-Gong Duh
    Yen-Ming Chen
    Journal of Electronic Materials, 2003, 32 : 1509 - 1514
  • [26] Impression creep characterization of rapidly cooled Sn-3.5Ag solders
    Dutta, I
    Park, C
    Choi, S
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 379 (1-2): : 401 - 410
  • [27] Damping characteristics of Sn-3Ag-0.5Cu and Sn-37Pb solders studied by dynamic mechanical analysis
    Chang, S. H.
    Wu, S. K.
    SCRIPTA MATERIALIA, 2010, 63 (10) : 957 - 960
  • [28] Effect of initial microstructure, frequency and temperature on the low cycle fatigue behaviour of the soldering alloys 96.5Sn-3.5Ag and 63Sn-37Pb
    Boulaajaj, A.
    Cabrera, J. M.
    Prado, J. M.
    ENGINEERING FAILURE ANALYSIS, 2008, 15 (03) : 220 - 228
  • [29] Microstructural and mechanical characterization of melt spun process Sn-3.5Ag and Sn-3.5Ag-xCu lead-free solders for low cost electronic assembly
    Shalaby, Rizk Mostafa
    Kamal, Mustafa
    Ali, Esmail A. M.
    Gumaan, Mohammed S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 690 : 446 - 452
  • [30] Effect of Soldering Temperature on Wetting and Optical Density of Dip Coated Sn and Sn-3.5Ag Solders
    Xu, Zengfeng
    Sharma, Ashutosh
    Lee, Soon Jae
    Jung, Jae Pil
    MATERIALS AND MANUFACTURING PROCESSES, 2015, 30 (01) : 127 - 132
12345