Low cycle fatigue lives of Sn-37Pb and Sn-3.5Ag solders at low temperatures

被引：5

作者：

Hiyoshi, Noritake ^{[1
]}

Katoh, Akihisa ^{[2
]}

Sakane, Masao ^{[3
]}

Tsukada, Yutaka ^{[4
]}

机构：

[1] Dept. of Mech. Eng., Ishikawa National College of Tech., Kahoku-gun, Ishikawa 929-0392, Japan

[2] Ishikawa National College of Tech., Kahoku-gun, Ishikawa 929-0392, Japan

[3] Dept of Mech. Eng., Ritsumeikan Univ., Noji-higashi, Kusats 525-8577, Japan

[4] KYOCERA SLC Technologies Corporation, Ichimiyake, Yasu 520-2362, Japan

来源：

Zairyo/Journal of the Society of Materials Science, Japan | 2009年 / 58卷 / 02期

关键词：

Lead alloys - Stress-strain curves - Tin alloys - Fatigue testing - Low-cycle fatigue - Silver alloys - Binary alloys - Temperature - Strain energy;

D O I：

10.2472/jsms.58.155

中图分类号：

学科分类号：

摘要：

This paper describes low cycle fatigue lives of Sn-37Pb and Sn-3.5Ag solders at low temperatures. Push-pull low cycle fatigue tests were carried out at 253K and 273K to study the temperature effect on low cycle fatigue life. Plastic strain range was a suitable parameter for correlating the low cycle fatigue lives for the Sn-37Pb solder at the four temperatures but it was not for the Sn-3.5Ag solder. Strain energy parameter which is defined as the product of strain and stress ranges was a suitable parameter for the Sn-3.5Ag solder. Application of universal slope method was also discussed for predicting the low cycle fatigue lives of Sn-37Pb and Sn-3.5Ag solders. © 2009 The Society of Materials Science, Japan.

引用

页码：155 / 161

共 50 条

[31] Effect of axial ratcheting deformation on torsional low cycle fatigue life of lead-free solder Sn-3.5Ag
Gao, Hong
Chen, Xu
INTERNATIONAL JOURNAL OF FATIGUE, 2009, 31 (02) : 276 - 283
[32] Crack initiation and propagation behavior of Pb-Sn solders in torsion low cycle fatigue
Nose, H
Sakane, M
Furusawa, H
Yamashita, M
Shiokawa, K
PROGRESS IN MECHANICAL BEHAVIOUR OF MATERIALS (ICM8), VOL 1: FATIGUE AND FRACTURE, 1999, : 42 - 46
[33] Influence of frequency on low cycle fatigue behavior of Pb-free solder 96.5Sn-3.5Ag
Kanchanomai, C
Miyashita, Y
Mutoh, Y
Mannan, SL
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 345 (1-2): : 90 - 98
[34] Low-cycle fatigue behavior of Sn-Ag, Sn-Ag-Cu, and Sn-Ag-Cu-Bi lead-free solders
Kanchanomai, C
Miyashita, Y
Mutoh, Y
JOURNAL OF ELECTRONIC MATERIALS, 2002, 31 (05) : 456 - 465
[35] Low-cycle fatigue behavior of Sn-Ag, Sn-Ag-Cu, and Sn-Ag-Cu-Bi lead-free solders
Chaosuan Kanchanomai
Yukio Miyashita
Yoshiharu Mutoh
Journal of Electronic Materials, 2002, 31 : 456 - 465
[36] Low-cycle fatigue prediction model for pb-free solder 96.5Sn-3.5Ag
C. Kanchanomai
Y. Mutoh
Journal of Electronic Materials, 2004, 33 : 329 - 333
[37] Low-cycle fatigue prediction model for Pb-free solder 96.5Sn-3.5Ag
Kanchanomai, C
Mutoh, Y
JOURNAL OF ELECTRONIC MATERIALS, 2004, 33 (04) : 329 - 333
[38] Multiaxial low-cycle fatigue of 63Sn-37Pb solder
Chen, X
Jin, D
Sakane, M
Yamamoto, T
JOURNAL OF ELECTRONIC MATERIALS, 2005, 34 (01) : L1 - L6
[39] Comparison of Interfacial Stability of Pb-Free Solders (Sn-3.5Ag, Sn-3.5Ag-0.7Cu, and Sn-0.7Cu) on ENIG-Plated Cu During Aging
Yoon, Jeong-Won
Noh, Bo-In
Jung, Seung-Boo
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2010, 33 (01): : 64 - 70
[40] Multiaxial low-cycle fatigue of 63Sn-37Pb solder
X. Chen
D. Jin
M. Sakane
T. Yamamoto
Journal of Electronic Materials, 2005, 34 : L1 - L6

← 1 2 3 4 5 →