Simplified processing of anode-supported thin film planar solid oxide fuel cells

被引：90
|
作者：
Basu, RN [1 ]
Blass, G [1 ]
Buchkremer, HP [1 ]
Stöver, D [1 ]
Tietz, F [1 ]
Wessel, E [1 ]
Vinke, IC [1 ]
机构：
[1] Forschungszentrum Julich, Inst Mat & Proc Energy Syst IWV, D-52425 Julich, Germany
来源：
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2005年 / 25卷 / 04期
关键词：
suspension; YSZ; ZrO2; fuel cells; co-firing; sintering;
D O I：
10.1016/j.jeurceramsoc.2004.01.018
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The concept of anode-supported planar solid oxide fuel cells (SOFCs) involves different fabrication procedures and several sintering steps. This contribution is an attempt towards minimizing the number of sintering steps. By adopting an improved technique a pre-firing step was eliminated. Cells obtained following this co-firing technique showed relatively higher power density (similar to1 A cm(-2) at 0.7 V) at an operating temperature of 800degreesC compared to the cells prepared by the conventional technique. In the present investigation, cells as large as10 cm x 10 cm were prepared and characterized following the new co-firing approach. Detailed microstructural, leak-rate testing (gastightness of the sintered electrolyte film) and electrochemical characterizations were carried out. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码：463 / 471
页数：9
相关论文
共 50 条
  • [21] Enhancement of fuel transfer in anode-supported honeycomb solid oxide fuel cells
    Ikeda, Sou
    Nakajima, Hironori
    Kitahara, Tatsumi
    [J]. 7TH EUROPEAN THERMAL-SCIENCES CONFERENCE (EUROTHERM2016), 2016, 745
  • [22] Impact of nanostructured anode on low-temperature performance of thin-film-based anode-supported solid oxide fuel cells
    Park, Jung Hoon
    Han, Seung Min
    Yoon, Kyung Joong
    Kim, Hyoungchul
    Hong, Jongsup
    Kim, Byung-Kook
    Lee, Jong-Ho
    Son, Ji-Won
    [J]. JOURNAL OF POWER SOURCES, 2016, 315 : 324 - 330
  • [23] A comprehensive CFD model of anode-supported solid oxide fuel cells
    Jeon, Dong Hyup
    [J]. ELECTROCHIMICA ACTA, 2009, 54 (10) : 2727 - 2736
  • [24] Anode-supported solid oxide fuel cells with ion conductor infiltration
    Timurkutluk, Bora
    Timurkutluk, Cigdem
    Mat, Mahmut D.
    Kaplan, Yuksel
    [J]. INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2011, 35 (12) : 1048 - 1055
  • [25] Characterization of Anode-Supported Solid Oxide Fuel Cells With PSCF Cathode
    Haanappel, V. A. C.
    Mai, A.
    Uhlenbruck, S.
    Tietz, F.
    [J]. JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, 2009, 6 (01): : 0110071 - 0110076
  • [26] Sequential Tape Casting of Anode-Supported Solid Oxide Fuel Cells
    Menzler, N. H.
    Malzbender, J.
    Schoderboeck, P.
    Kauert, R.
    Buchkremer, H. P.
    [J]. FUEL CELLS, 2014, 14 (01) : 96 - 106
  • [27] Hierarchically Oriented Macroporous Anode-Supported Solid Oxide Fuel Cell with Thin Ceria Electrolyte Film
    Chen, Yu
    Zhang, Yanxiang
    Baker, Jeffrey
    Majumdar, Prasun
    Yang, Zhibin
    Han, Minfang
    Chen, Fanglin
    [J]. ACS APPLIED MATERIALS & INTERFACES, 2014, 6 (07) : 5130 - 5136
  • [28] Isothermal models for anode-supported tubular solid oxide fuel cells
    Bhattacharyya, Debangsu
    Rengaswamy, Raghunathan
    Finnerty, Caine
    [J]. CHEMICAL ENGINEERING SCIENCE, 2007, 62 (16) : 4250 - 4267
  • [29] Fabrication and properties of anode-supported tubular solid oxide fuel cells
    Du, YH
    Sammes, NM
    [J]. JOURNAL OF POWER SOURCES, 2004, 136 (01) : 66 - 71
  • [30] Fabrication and Performance of Ceramic Anode-supported Solid Oxide Fuel Cells
    Yang, Zhibin
    Pang, Zhaohua
    Zhu, Tenglong
    Zheng, Ziwei
    Han, Minfang
    [J]. SOLID OXIDE FUEL CELLS 13 (SOFC-XIII), 2013, 57 (01): : 549 - 554
12345