Simplified processing of anode-supported thin film planar solid oxide fuel cells

被引：90

作者：

Basu, RN ^{[1
]}

Blass, G ^{[1
]}

Buchkremer, HP ^{[1
]}

Stöver, D ^{[1
]}

Tietz, F ^{[1
]}

Wessel, E ^{[1
]}

Vinke, IC ^{[1
]}

机构：

[1] Forschungszentrum Julich, Inst Mat & Proc Energy Syst IWV, D-52425 Julich, Germany

来源：

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2005年 / 25卷 / 04期

关键词：

suspension; YSZ; ZrO2; fuel cells; co-firing; sintering;

D O I：

10.1016/j.jeurceramsoc.2004.01.018

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The concept of anode-supported planar solid oxide fuel cells (SOFCs) involves different fabrication procedures and several sintering steps. This contribution is an attempt towards minimizing the number of sintering steps. By adopting an improved technique a pre-firing step was eliminated. Cells obtained following this co-firing technique showed relatively higher power density (similar to1 A cm(-2) at 0.7 V) at an operating temperature of 800degreesC compared to the cells prepared by the conventional technique. In the present investigation, cells as large as10 cm x 10 cm were prepared and characterized following the new co-firing approach. Detailed microstructural, leak-rate testing (gastightness of the sintered electrolyte film) and electrochemical characterizations were carried out. (C) 2004 Elsevier Ltd. All rights reserved.

引用

页码：463 / 471

页数：9

共 50 条

[31] Redox Stability Optimization in Anode-Supported Solid Oxide Fuel Cells
Wang, Yu
Song, Ming
[J]. MATERIALS, 2024, 17 (13)
[32] Oxidation failure modes of anode-supported solid oxide fuel cells
Sarantaridis, D.
Rudkin, R. A.
Atkinson, A.
[J]. JOURNAL OF POWER SOURCES, 2008, 180 (02) : 704 - 710
[33] Modeling of convective heat and mass transfer characteristics of anode-supported planar solid oxide fuel cells
Magar, Y. N.
Manglik, R. M.
[J]. JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, 2007, 4 (02): : 185 - 193
[34] Acceleration tests: Degradation of anode-supported planar solid oxide fuel cells at elevated operating temperatures
Kim, Sun Jae
Choi, Moon-Bong
Park, Mansoo
Kim, Hyoungchul
Son, Ji-Won
Lee, Jong-Ho
Kim, Byung-Kook
Lee, Hae-Weon
Kim, Seung-Goo
Yoon, Kyung Joong
[J]. JOURNAL OF POWER SOURCES, 2017, 360 : 284 - 293
[35] Anode Current Collecting Efficiency of Tubular Anode-supported Solid Oxide Fuel Cells
Bai, Y.
Wang, C.
Jin, C.
Liu, J.
[J]. FUEL CELLS, 2011, 11 (03) : 465 - 468
[36] Effect of anode thickness on impedance response of anode-supported solid oxide fuel cells
Park, Young Min
Lee, Hoo Jung
Bae, Hong Yeol
Ahn, Jin Su
Kim, Haekyoung
[J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2012, 37 (05) : 4394 - 4400
[37] CHARACTERIZATION OF AN ANODE-SUPPORTED PLANAR SOLID OXIDE FUEL CELL WITH A POROSITY CONCENTRATION GRADIENT
An, Chung Min
Song, Jung-Hoon
Kang, Inyoung
Sammes, Nigel
[J]. ADVANCES IN SOLID OXIDE FUEL CELLS V, 2010, 30 (04): : 75 - +
[38] Modeling, parametric analysis and optimization of an anode-supported planar solid oxide fuel cell
Borji, Mehdi
Atashkari, Kazem
Nariman-zadeh, Nader
Masoumpour, Mehdi
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2015, 229 (17) : 3125 - 3140
[39] Multilayer tape casting of large-scale anode-supported thin-film electrolyte solid oxide fuel cells
Liu, Mingfei
Liu, Ying
[J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2019, 44 (31) : 16976 - 16982
[40] Development of thin-film nano-structured electrolyte layers for application in anode-supported solid oxide fuel cells
Van Gestel, Tim
Sebold, Doris
Meulenberg, Wilhelm A.
Buchkremer, Hans-Peter
[J]. SOLID STATE IONICS, 2008, 179 (11-12) : 428 - 437

← 1 2 3 4 5 →