Simplified processing of anode-supported thin film planar solid oxide fuel cells

被引：90
|
作者：
Basu, RN [1 ]
Blass, G [1 ]
Buchkremer, HP [1 ]
Stöver, D [1 ]
Tietz, F [1 ]
Wessel, E [1 ]
Vinke, IC [1 ]
机构：
[1] Forschungszentrum Julich, Inst Mat & Proc Energy Syst IWV, D-52425 Julich, Germany
来源：
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2005年 / 25卷 / 04期
关键词：
suspension; YSZ; ZrO2; fuel cells; co-firing; sintering;
D O I：
10.1016/j.jeurceramsoc.2004.01.018
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The concept of anode-supported planar solid oxide fuel cells (SOFCs) involves different fabrication procedures and several sintering steps. This contribution is an attempt towards minimizing the number of sintering steps. By adopting an improved technique a pre-firing step was eliminated. Cells obtained following this co-firing technique showed relatively higher power density (similar to1 A cm(-2) at 0.7 V) at an operating temperature of 800degreesC compared to the cells prepared by the conventional technique. In the present investigation, cells as large as10 cm x 10 cm were prepared and characterized following the new co-firing approach. Detailed microstructural, leak-rate testing (gastightness of the sintered electrolyte film) and electrochemical characterizations were carried out. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码：463 / 471
页数：9
相关论文
共 50 条
  • [41] Engineered anode structure for enhanced electrochemical performance of anode-supported planar solid oxide fuel cell
    Mukhopadhyay, Madhumita
    Mukhopadhyay, Jayanta
    Sharma, Abhijit Das
    Basu, Rajendra N.
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2012, 37 (03) : 2524 - 2534
  • [42] Thermal stress analysis of a planar anode-supported solid oxide fuel cell: Effects of anode porosity
    Zeng, Shumao
    Xu, Min
    Parbey, Jeo
    Yu, Guangsen
    Andersson, Martin
    Li, Qiang
    Li, Baihai
    Li, Tingshuai
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2017, 42 (31) : 20239 - 20248
  • [43] Fabrication and characterization of anode-supported electrolyte thin films for intermediate temperature solid oxide fuel cells
    Kim, SD
    Hyun, SH
    Moon, J
    Kim, JH
    Song, RH
    [J]. JOURNAL OF POWER SOURCES, 2005, 139 (1-2) : 67 - 72
  • [44] Reduced-Temperature Firing of Anode-Supported Solid Oxide Fuel Cells
    Gao, Zhan
    Barnett, Scott A.
    [J]. ELECTROCHEMICAL SYNTHESIS OF FUELS 2, 2013, 58 (02): : 231 - 242
  • [45] Effects of Reduced Firing Temperature on Anode-Supported Solid Oxide Fuel Cells
    Gao, Zhan
    Barnett, Scott A.
    [J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2014, 161 (05) : F600 - F604
  • [46] Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells
    Leonide, A.
    Sonn, V.
    Weber, A.
    Ivers-Tiffee, E.
    [J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2008, 155 (01) : B36 - B41
  • [47] Operation of anode-supported solid oxide fuel cells on methane and natural gas
    Liu, JA
    Barnett, SA
    [J]. SOLID STATE IONICS, 2003, 158 (1-2) : 11 - 16
  • [48] Performance of anode-supported single-chamber solid oxide fuel cells
    Ai Gang
    Lu Zhe
    Wei Bo
    Huang Xiqiang
    Chen Kongfa
    Su Wenhui
    [J]. CHINESE JOURNAL OF CATALYSIS, 2006, 27 (10) : 885 - 889
  • [49] Anode-supported Solid Oxide Fuel Cells Prepared by Spin-coating
    Yu, Ji Haeng
    Lee, Hee Lak
    Woo, Sang Kuk
    [J]. JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2007, 44 (12) : 733 - 739
  • [50] Nickel foam anode-supported solid oxide fuel cells with composite electrolytes
    Arshad, Muhammad Sarfraz
    Mushtaq, Named
    Ahmad, Muhammad Ashfaq
    Naseem, Shahzad
    Atiq, Shahid
    Ahmed, Zahoor
    Ali, Rashid
    Abbas, Ghazanfar
    Raza, Rizwan
    [J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2017, 42 (34) : 22288 - 22293
12345