Experimental Investigations on the Effect of Vegetable Based Cutting Fluid in Turning AISI 1040 Steel

被引：1

作者：

Jhodkar, Durwesh ^{[1
]}

Amaranth, M. ^{[1
]}

Chelladurai, H. ^{[1
]}

Ramkumar, J. ^{[2
]}

机构：

[1] Indian Inst Informat & Technol Design & Mfg, Dept Mech Engn, Jabalpur 482005, India

[2] Indian Inst Technol, Dept Mech Engn, Kanpur 208016, Uttar Pradesh, India

来源：

ENGINEERING AND MANUFACTURING TECHNOLOGIES | 2014年 / 541-542卷

关键词：

Tool wear; flank; crater; coconut oil; TOOL WEAR; COCONUT OIL; LUBRICANTS;

D O I：

10.4028/www.scientific.net/AMM.541-542.368

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Application of petroleum based cutting fluids in machining operation may cause many problems such as eye burn and skin inflation etc. Vegetables oils are good alternative to overcome such issues. In this work, experiments were carried out to study the influence of coconut oil on the performance of single point cutting tool insert in turning operation. Three cutting conditions viz. dry, wet and coconut oil were considered to evaluate the tool wear. Results obtained from the experiments highlighted the advantages of coconut oil, a considerable reduction in flank wear, crater wear and auxiliary wear was observed in the turning operation.

引用

页码：368 / +

页数：2

共 50 条

[1] Effectiveness of vegetable oil based nanofluids as potential cutting fluids in turning AISI 1040 steel
Padmini, R.
Krishna, P. Vamsi
Rao, G. Krishna Mohana
TRIBOLOGY INTERNATIONAL, 2016, 94 : 490 - 501
[2] Studies on corrosion and quenching effects of cutting fluid with vegetable-based emulsifier on AISI 1040 steel
Srikant, R. R.
Ramana, V. S. N. Venkata
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2016, 230 (01) : 178 - 181
[3] Experimental investigation of cutting parameters using nano lubrication on turning AISI 1040 steel
Kanth, V. Krishna
Sreeramulu, D.
Srikiran, S.
Kumar, M. Pradeep
Jagdeesh, K. E.
Govindh, B.
MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 2095 - 2101
[4] Performance evaluation of vegetable emulsifier based green cutting fluid in turning of American Iron and Steel Institute (AISI) 1040 steel an initiative towards sustainable manufacturing
Srikant, R. R.
Ramana, V. S. N. V.
JOURNAL OF CLEANER PRODUCTION, 2015, 108 : 104 - 109
[5] PERFORMANCE EVALUATION OF COCONUT OIL BASED CUTTING FLUID WITH BIODEGRADABLE ADDITIVES ON CYLINDRICAL TURNING OF AISI 1040 CARBON STEEL
Adedayo, Segun M.
Omoshola, Bright K.
Omoniyi, Peter O.
ACTA METALLURGICA SLOVACA, 2022, 28 (01): : 10 - 13
[6] Experimental investigations of vegetable based cutting fluids with extreme pressure during turning of AISI 304L
Ozcelik, Babur
Kuram, Emel
Cetin, M. Huseyin
Demirbas, Erhan
TRIBOLOGY INTERNATIONAL, 2011, 44 (12) : 1864 - 1871
[7] EXPERIMENTAL INVESTIGATIONS TO EVALUATE THE PERFORMANCE OF ALTERNATE STRIPED COATED CARBIDE INSERTS IN TURNING OF AISI 1040 STEEL
Chilamkurti, L. V. R. S. V. Prasad
Puvvada, Naga Lakshmi Pavani
Koona, Ramji
Swarna, Venkata Ramana
PROCEEDINGS OF THE ASME 10TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2015, VOL 1, 2015,
[8] Experimental investigations on influence of mist cooling using nanofluids on machining parameters in turning AISI 1040 steel
Amrita, M.
Srikant, R. R.
Sitaramaraju, A. V.
Prasad, M. M. S.
Krishna, P. Vamsi
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2013, 227 (12) : 1334 - 1346
[9] Experimental investigation and optimization for surface roughness for turning of AISI 1040 steel
Murugesan, Seenivasan
Thangamuthu, Venugopal
Shivaji, Rohokale Milind
Kumar, Suresh R.
JOURNAL OF CERAMIC PROCESSING RESEARCH, 2022, 23 (03): : 367 - 372
[10] Performance evaluation of vegetable-based cutting fluids in turning of AISI 1050 steel
Almeida Carvalho, Deborah Oliveira
Ribeiro da Silva, Leonardo Rosa
Sopchenski, Luciane
Jackson, Mark James
Machado, Alisson Rocha
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 103 (1-4): : 1603 - 1619

← 1 2 3 4 5 →