Experimental investigation and optimization for surface roughness for turning of AISI 1040 steel

被引：1

作者：

Murugesan, Seenivasan ^{[1
]}

Thangamuthu, Venugopal ^{[1
]}

Shivaji, Rohokale Milind ^{[2
]}

Kumar, Suresh R. ^{[3
]}

机构：

[1] KGISL Inst Technol, Mech Engn, Coimbatore, Tamil Nadu, India

[2] SKN Sinhgad Inst Technol & Sci, Mech Engn, Lonavala, India

[3] Sri Eshwar Coll Engn, Mech Engn, Coimbatore, Tamil Nadu, India

来源：

JOURNAL OF CERAMIC PROCESSING RESEARCH | 2022年 / 23卷 / 03期

关键词：

AISI; 1040; Tool geometry; ANOVA; Taguchi; Optimization; Surface quality; MACHINING PARAMETERS; CUTTING PARAMETERS; TAGUCHI METHOD;

D O I：

10.36410/jcpr.2022.23.3.367

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In turning operation the effectiveness of the process is completely governed by the selection of the proper tool and its geometry. The right selection of tool geometry will provide optimized turning process parameters for minimizing the surface roughness. This work focuses on optimization of the surface roughness using response optimization while turning AISI1040 steel. Tool inserts are used to position the cutting tool and the tool geometries are considered as the process parameters. The minimization of the surface roughness is considered. 27 experiments are conducted and the surface roughness is measured and optimized using the taguchi technique. The main effects plots and ANOVA table are discussed in this work. Also response optimization is carried out and the composite desirability is determined and analysed.

引用

页码：367 / 372

页数：6

共 50 条

[1] Investigation and Optimization of Machining Parameters Influence on Surface Roughness in Turning AISI 4340 Steel
Deepanraj, Balakrishnan
Raman, Lakshmipathi Anantha
Senthilkumar, Natarajan
Shivasankar, Jayakumar
[J]. FME TRANSACTIONS, 2020, 48 (02): : 383 - 390
[2] Experimental investigation of dry turning of AISI 1040 steel with TiN coated insert
Nair, Sreejith S.
Ramkumar, T.
Selva Kumar, M.
Netto, Fabian
[J]. ENGINEERING RESEARCH EXPRESS, 2019, 1 (02):
[3] Experimental Investigation of the Effects of Cutting Tool Coating Materials on Surface Roughness in Machining of AISI 1040 Steel
Habali, Kasim
Gokkaya, Hasan
Sert, Hasan
[J]. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2006, 9 (01): : 35 - 38
[4] Experimental investigation of cutting parameters using nano lubrication on turning AISI 1040 steel
Kanth, V. Krishna
Sreeramulu, D.
Srikiran, S.
Kumar, M. Pradeep
Jagdeesh, K. E.
Govindh, B.
[J]. MATERIALS TODAY-PROCEEDINGS, 2019, 18 : 2095 - 2101
[5] Experimental investigation to study the performance of solid lubricants in turning of AISI1040 steel
Krishna, P. Vamsi
Srikant, R. R.
Rao, D. N.
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2010, 224 (J12) : 1273 - 1281
[6] Optimization of surface roughness in the turning process of AISI 4340 tempering steel
Ozsoy, Neslihan
Ozsoy, Murat
[J]. EMERGING MATERIALS RESEARCH, 2020, 9 (01) : 104 - 109
[7] Predictive modelling of surface roughness and tool wear in solid lubricant assisted turning of AISI 1040 steel
Krishna, P. Vamsi
Rao, D. N.
Srikant, R. R.
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2009, 223 (J6) : 929 - 934
[8] Experimental Investigation of Surface Roughness in High Speed Turning of Hardened AISI P20 Steel
Cui, Bodi
[J]. MATERIALS PROCESSING TECHNOLOGY, PTS 1-3, 2012, 418-420 : 1228 - 1231
[9] Investigation to study the applicability of solid lubricant in turning AISI 1040 steel
Mukhopadhyay, Deep
Banerjee, Sankha
Reddy, N. Suresh Kumar
[J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2007, 129 (03): : 520 - 526
[10] Neural network prediction of surface roughness in milling of AISI 1040 steel
Topal, E. S.
Sinanoglu, C.
Gercekcioglu, E.
Yildizli, K.
[J]. JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, 2007, 13 (01): : 18 - 23

← 1 2 3 4 5 →