Experimental Investigations on the Effect of Vegetable Based Cutting Fluid in Turning AISI 1040 Steel

被引：1

作者：

Jhodkar, Durwesh ^{[1
]}

Amaranth, M. ^{[1
]}

Chelladurai, H. ^{[1
]}

Ramkumar, J. ^{[2
]}

机构：

[1] Indian Inst Informat & Technol Design & Mfg, Dept Mech Engn, Jabalpur 482005, India

[2] Indian Inst Technol, Dept Mech Engn, Kanpur 208016, Uttar Pradesh, India

来源：

ENGINEERING AND MANUFACTURING TECHNOLOGIES | 2014年 / 541-542卷

关键词：

Tool wear; flank; crater; coconut oil; TOOL WEAR; COCONUT OIL; LUBRICANTS;

D O I：

10.4028/www.scientific.net/AMM.541-542.368

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Application of petroleum based cutting fluids in machining operation may cause many problems such as eye burn and skin inflation etc. Vegetables oils are good alternative to overcome such issues. In this work, experiments were carried out to study the influence of coconut oil on the performance of single point cutting tool insert in turning operation. Three cutting conditions viz. dry, wet and coconut oil were considered to evaluate the tool wear. Results obtained from the experiments highlighted the advantages of coconut oil, a considerable reduction in flank wear, crater wear and auxiliary wear was observed in the turning operation.

引用

页码：368 / +

页数：2

共 50 条

[31] An Experimental Study on the effect of Minimum Quantity Lubrication on Drilling AISI 1040 Steel
Ahsan, A. M. M. Nazmul
Kibria, Md. Golam
Ahmed, Md. Raju
GAZI UNIVERSITY JOURNAL OF SCIENCE, 2015, 28 (01): : 161 - 167
[32] The influence of minimum quantity of lubrication (MQL) on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel
Dhar, NR
Islam, MW
Islam, S
Mithu, MAH
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 171 (01) : 93 - 99
[33] Influence of nano alumina/vegetable oil based cutting fluid on MQL turning of stainless steel 304
Pradeep A.
Kavitha N.
Janardhana Rao T.V.
Vijayakumar S.
Materials Today: Proceedings, 2022, 69 : 658 - 661
[34] Experimental Investigation of the Effects of Cutting Tool Coating Materials on Surface Roughness in Machining of AISI 1040 Steel
Habali, Kasim
Gokkaya, Hasan
Sert, Hasan
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2006, 9 (01): : 35 - 38
[35] Investigations of Surface Roughness and Temperatures in Vegetable Oil-based n-MQL Turning of AISI 4340 Steel
Miriyala V.
Patil B.T.
Shaikh V.A.
Sudhakar D.S.S.
Deshmukh S.
Journal of Engineering, Project, and Production Management, 2023, 14 (01)
[36] Optimization of cutting parameters with respect to roughness for machining of hardened AISI 1040 steel
Sahinoglu, Abidin
Rafighi, Mohammad
MATERIALS TESTING, 2020, 62 (01) : 85 - 95
[37] Effects of minimum quantity lubrication (MQL) by vegetable oil-based cutting fluid on machinability of AISI 9310 steel
Dhar N.R.
Khan M.M.A.
International Journal of Machining and Machinability of Materials, 2010, 7 (1-2) : 17 - 38
[38] Some investigations in hard turning of AISI 4340 alloy steel in different cutting environments by CBN insert
Naigade, Deepak M.
Patil, Deepakkumar H.
Sadaiah, Mudigonda
International Journal of Machining and Machinability of Materials, 2013, 14 (02) : 165 - 173
[39] Comparative Study of Cutting Fluid Application Methods to Improve Machining Conditions During Surface Grinding on AISI 1040 Steel
Kantharaj, I.
Sekar, M.
Vasanth, X. Ajay
Mohanasundaram, S.
ADVANCES IN MANUFACTURING PROCESSES, ICEMMM 2018, 2019, : 71 - 79
[40] Effect of cutting parameters on surface roughness in turning of annealed AISI-1020 steel
Zurita, Omar
Di-Graci, Veronica
Capace, Maria
REVISTA FACULTAD DE INGENIERIA, UNIVERSIDAD PEDAGOGICA Y TECNOLOGICA DE COLOMBIA, 2018, 27 (47): : 111 - 118

← 1 2 3 4 5 →