Experimental Investigations on the Effect of Vegetable Based Cutting Fluid in Turning AISI 1040 Steel

被引：1

作者：

Jhodkar, Durwesh ^{[1
]}

Amaranth, M. ^{[1
]}

Chelladurai, H. ^{[1
]}

Ramkumar, J. ^{[2
]}

机构：

[1] Indian Inst Informat & Technol Design & Mfg, Dept Mech Engn, Jabalpur 482005, India

[2] Indian Inst Technol, Dept Mech Engn, Kanpur 208016, Uttar Pradesh, India

来源：

ENGINEERING AND MANUFACTURING TECHNOLOGIES | 2014年 / 541-542卷

关键词：

Tool wear; flank; crater; coconut oil; TOOL WEAR; COCONUT OIL; LUBRICANTS;

D O I：

10.4028/www.scientific.net/AMM.541-542.368

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Application of petroleum based cutting fluids in machining operation may cause many problems such as eye burn and skin inflation etc. Vegetables oils are good alternative to overcome such issues. In this work, experiments were carried out to study the influence of coconut oil on the performance of single point cutting tool insert in turning operation. Three cutting conditions viz. dry, wet and coconut oil were considered to evaluate the tool wear. Results obtained from the experiments highlighted the advantages of coconut oil, a considerable reduction in flank wear, crater wear and auxiliary wear was observed in the turning operation.

引用

页码：368 / +

页数：2

共 50 条

[21] The effects of cryogenic cooling on chips and cutting forces in turning AISI 1040 and AISI 4320 steels
Dhar, NR
Kishore, SVN
Paul, S
Chattopadhyay, AB
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2002, 216 (05) : 713 - 724
[22] EXPERIMENTAL STUDY FOR TURNING AISI1040 STEEL USING TiCN/TiN COATED TOOL
Marimuthu, P.
Paul, N. E. Edwin
ADVANCEMENTS IN AUTOMATION AND CONTROL TECHNOLOGIES, 2014, 573 : 638 - +
[23] FEM ANALYSIS OF THERMAL BEHAVIOR DURING TURNING OF STEEL AISI 1040 AND AISI 4140
Daniel-Viorel, Vlad
Catalin, Fetecau
Baroiu, Nicusor
MODTECH 2011: NEW FACE OF T.M.C.R., VOL I AND II, 2011, : 1157 - +
[24] Performance evaluation of jatropha oil-based cutting fluid in turning AISI 1525 steel alloy
Kazeem, R. A.
Fadare, D. A.
Abutu, J.
Lawal, S. A.
Adesina, O. S.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2020, 31 (31) : 418 - 430
[25] Investigation to study the applicability of solid lubricant in turning AISI 1040 steel
Mukhopadhyay, Deep
Banerjee, Sankha
Reddy, N. Suresh Kumar
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2007, 129 (03): : 520 - 526
[26] Performance assessment of mahogany oil-based cutting fluid in turning AISI 304 steel alloy
Abutu, Joseph
Akene, Paul
Musa, Kabiru
Onunze, Emmanuel Chukwudi
Lawal, Sunday Albert
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 132 (3-4): : 1315 - 1335
[27] Performance assessment of mahogany oil-based cutting fluid in turning AISI 304 steel alloy
Joseph Abutu
Paul Akene
Kabiru Musa
Emmanuel Chukwudi Onunze
Sunday Albert Lawal
The International Journal of Advanced Manufacturing Technology, 2024, 132 : 1315 - 1335
[28] Studying and Optimizing the Effect of Process Parameters on Machining Vibration in Turning Process of AISI 1040 Steel
Al-Shayea, Adel
Abdullah, Fawaz M.
Noman, Mohammed A.
Kaid, Husam
Nasr, Emad Abouel
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2020, 2020
[29] EXPERIMENTAL INVESTIGATION ON THE EFFECT OF CONTROLLED HEATING AND COOLING PROCESSES IN AISI 1040 STEEL
Sunanda, Alamura
Jagannadha, Munagapati Venkata
SURANAREE JOURNAL OF SCIENCE AND TECHNOLOGY, 2023, 30 (01):
[30] An experimental investigation on effect of minimum quantity lubrication in machining AISI 1040 steel
Dhar, N. R.
Ahmed, M. T.
Islam, S.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2007, 47 (05): : 748 - 753

← 1 2 3 4 5 →