Prediction and optimization of surface roughness and MRR in wire EDM of maraging steel 350

被引：6
|
作者：
Dayakar, K. [1 ]
Raju, K. V. M. Krishnam [1 ]
Raju, Ch. Rama Bhadri [1 ]
机构：
[1] SRKR Engn Coll, Dept Mech Engn, Bhimavaram 534204, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 18卷
关键词：
WEDM; ANOVA; Surface roughness (Ra); MRR; Taguchi;
D O I：
10.1016/j.matpr.2019.06.635
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Wire EDM (WEDM) is a special method of electrical discharge machining. Maraging steel had very-low carbon steel which consists of more material toughness and strength. In present work a Taguchi optimization method proposed for WEDM of maraging steel 350 and the machining output responses are Material Removal Rate (MRR) and Surface roughness (Ra). Machining process is planned by Taguchi's robust design. The analysis is performed for the results obtained by using analysis of variance (ANOVA). The optimum conditions for this work are performed through Taguchi analysis. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2123 / 2131
页数：9
相关论文
共 50 条
  • [31] Optimization of Recast Layer Thickness and Surface Roughness in the Wire EDM Process of AISI H13 Tool Steel using Taguchi and Fuzzy Logic
    Rupajati, Pathya
    Soepangkat, Bobby O. P.
    Pramujati, Bambang
    Agustin, H. C. Kis
    ADVANCES IN APPLIED MECHANICS AND MATERIALS, 2014, 493 : 529 - 534
  • [32] Influence of machining parameters on surface roughness in wire EDM using zinc coated brass wire
    Ali, Muayad M.
    Ibrahim, Abbas F.
    MATERIALS TODAY-PROCEEDINGS, 2022, 61 : 987 - 991
  • [33] Effect of Wire-EDM Machining Parameters on Surface Roughness and Material Removal Rate of High Strength Armor Steel
    Bobbili, Ravindranadh
    Madhu, V.
    Gogia, A. K.
    MATERIALS AND MANUFACTURING PROCESSES, 2013, 28 (04) : 364 - 368
  • [34] Investigation of the Effect of Process Parameters on Surface Roughness in Wire EDM of Titanium Alloy
    Garg, M. P.
    Jain, Ajai
    Bhushan, Gian
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-4, 2012, 472-475 : 78 - +
  • [35] Prediction of Machining Responses in Wire EDM on Stainless Steel-316
    Ugrasen, G.
    Rakesh, D.
    Ravindra, H., V
    Guruprasad, K.
    Singu, Sivanaga Malleswara Rao
    ADVANCES IN SIMULATION, PRODUCT DESIGN AND DEVELOPMENT, 2020, : 417 - 425
  • [36] Wire EDM process parameter optimization for D2 steel
    Kumar, Ajay
    Jagota, Vishal
    Shawl, Rashed Qayoom
    Sharma, Vishal
    Sargam, Kumar
    Shabaz, Mohammad
    Khan, Mohd Tanveer
    Rabani, Basharat
    Gandhi, Smiley
    MATERIALS TODAY-PROCEEDINGS, 2021, 37 : 2478 - 2482
  • [37] Investigation on Electrochemical Machining of EN31 Steel for Optimization of MRR and Surface Roughness using Artificial Bee Colony Algorithm
    Das, Milan Kumar
    Kumar, Kaushik
    Barman, Tapan Kr
    Sahoo, Prasanta
    12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 1587 - 1596
  • [38] An investigation on effects of wire-EDM machining parameters on surface roughness of newly developed DC53 die steel
    Kanlayasiri, K.
    Boonmung, S.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 187 : 26 - 29
  • [39] Optimization of surface roughness in EDM of pure using TLBO magnesium (Mg)
    Kumari, Soni
    Sonia, Pankaj
    Singh, Bharat
    Abhishek, Kumar
    Saxena, Kuldeep K.
    MATERIALS TODAY-PROCEEDINGS, 2020, 26 : 2458 - 2461
  • [40] Auger Analysis of Surface Films formed on the Surface of 18Ni350 Steel during Maraging
    ul Haq, Anwar
    Khan, M. Afzal
    Khan, Abdul Qadeer
    JOURNAL OF THE CHEMICAL SOCIETY OF PAKISTAN, 2018, 40 (02): : 304 - 310
12345