Prediction and optimization of surface roughness and MRR in wire EDM of maraging steel 350

被引：6
|
作者：
Dayakar, K. [1 ]
Raju, K. V. M. Krishnam [1 ]
Raju, Ch. Rama Bhadri [1 ]
机构：
[1] SRKR Engn Coll, Dept Mech Engn, Bhimavaram 534204, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 18卷
关键词：
WEDM; ANOVA; Surface roughness (Ra); MRR; Taguchi;
D O I：
10.1016/j.matpr.2019.06.635
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Wire EDM (WEDM) is a special method of electrical discharge machining. Maraging steel had very-low carbon steel which consists of more material toughness and strength. In present work a Taguchi optimization method proposed for WEDM of maraging steel 350 and the machining output responses are Material Removal Rate (MRR) and Surface roughness (Ra). Machining process is planned by Taguchi's robust design. The analysis is performed for the results obtained by using analysis of variance (ANOVA). The optimum conditions for this work are performed through Taguchi analysis. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2123 / 2131
页数：9
相关论文
共 50 条
  • [41] Experimental studies on Wire EDM for surface roughness and kerf width for shape memory alloy
    Goyal, Ashish
    Rahman, Huzef Ur
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2021, 46 (03):
  • [42] Experimental studies on Wire EDM for surface roughness and kerf width for shape memory alloy
    ASHISH GOYAL
    HUZEF UR RAHMAN
    Sādhanā, 2021, 46
  • [43] Optimization of Wire Electro Discharge Machining Parameters to Achieve Better MRR and Surface finish
    Manjaiah, M.
    Narendranath, S.
    Akbari, Javad
    INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 2635 - 2644
  • [44] Investigation of aluminum alloy 6061 in Wire-EDM regarding surface roughness and material removal rate by adopting optimization techniques
    Rawat, R. K.
    Saif, M.
    JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 2023, 17 (01) : 9410 - 9420
  • [45] Optimization of gap of width and surface roughness in wire cut EDM of AISI O1 using the Taguchi - fuzzy method
    Rupajati, P.
    Rasyid, M. K.
    Nurdin, A.
    9TH INTERNATIONAL CONFERENCE ON PHYSICS AND ITS APPLICATIONS (ICOPIA), 2019, 1153
  • [46] Multi-Criteria optimization of surface roughness in wire EDM of Inconel 718 by Taguchi based gray relational analysis method
    Altin Karatas, Meltem
    PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, 2022, 28 (04): : 516 - 532
  • [47] Prediction of Surface Roughness and Optimization of Cutting Parameters of Stainless Steel Turning Based on RSM
    Xiao, Maohua
    Shen, Xiaojie
    Ma, You
    Yang, Fei
    Gao, Nong
    Wei, Weihua
    Wu, Dan
    MATHEMATICAL PROBLEMS IN ENGINEERING, 2018, 2018
  • [48] PARAMETRIC INFLUENCE AND OPTIMIZATION OF WIRE EDM ON OIL HARDENED NON SHRINKING STEEL
    Kuruvila, Nixon
    Ravindra, H. V.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2011, VOL 3, 2012, : 891 - +
  • [49] Neural Network and Fuzzy Logic based prediction of Surface Roughness and MRR in Cylindrical Grinding Process
    Varma, N. Sudheer Kumar
    Rajesh, S.
    Raju, K. Sita Rama
    Raju, V. V. Murali Krishnam
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (08) : 8134 - 8141
  • [50] Improvement of MRR and surface roughness during electrical discharge machining (EDM) using aluminum oxide powder mixed dielectric fluid
    Khan, A. A.
    Mohiuddin, A. K. M.
    Latif, M. A. A.
    INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2017), 2018, 290
12345