Prediction and optimization of surface roughness and MRR in wire EDM of maraging steel 350

被引：6
|
作者：
Dayakar, K. [1 ]
Raju, K. V. M. Krishnam [1 ]
Raju, Ch. Rama Bhadri [1 ]
机构：
[1] SRKR Engn Coll, Dept Mech Engn, Bhimavaram 534204, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 18卷
关键词：
WEDM; ANOVA; Surface roughness (Ra); MRR; Taguchi;
D O I：
10.1016/j.matpr.2019.06.635
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Wire EDM (WEDM) is a special method of electrical discharge machining. Maraging steel had very-low carbon steel which consists of more material toughness and strength. In present work a Taguchi optimization method proposed for WEDM of maraging steel 350 and the machining output responses are Material Removal Rate (MRR) and Surface roughness (Ra). Machining process is planned by Taguchi's robust design. The analysis is performed for the results obtained by using analysis of variance (ANOVA). The optimum conditions for this work are performed through Taguchi analysis. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2123 / 2131
页数：9
相关论文
共 50 条
  • [21] Parametric optimization for surface roughness, kerf and MRR in wire electrical discharge machining (WEDM) using Taguchi design of experiment
    Adeel Ikram
    Nadeem Ahmad Mufti
    Muhammad Qaiser Saleem
    Ahmed Raza Khan
    Journal of Mechanical Science and Technology, 2013, 27 : 2133 - 2141
  • [22] Parametric optimization of MRR and surface roughness in wire electro discharge machining (WEDM) of D2 steel using Taguchi-based utility approach
    Manjaiah M.
    Laubscher R.F.
    Kumar A.
    Basavarajappa S.
    International Journal of Mechanical and Materials Engineering, 2016, 11 (1)
  • [23] Optimization and analysis of machining parameters by EDM on the surface roughness of AISI P20 steel
    Rossetto, Artur da Silva
    Haupt, William
    Consalter, Luiz Airton
    MATERIA-RIO DE JANEIRO, 2022, 27 (03):
  • [24] Application Potential of Fuzzy and Regression in Optimization of MRR and Surface Roughness during Machining of C45 Steel
    Madival, Santosh
    Ahmed, Mohammed Riyaz
    Halappa, Manjunath Lingappa
    Marulaiah, Lokesha
    PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING, 2019, 63 (02): : 132 - 139
  • [25] Experimental Investigation to Achieve Minimum Surface Roughness in Wire EDM Process
    Priyankara, K. P. M.
    Perera, G. I. P.
    PROCEEDINGS OF THE 9TH INTERNATIONAL CONFERENCE ON SUSTAINABLE BUILT ENVIRONMENT (ICSBE 2018), 2020, 44 : 239 - 251
  • [26] Influence of Wire EDM on the Surface Roughness of Products Obtained by Laser Surfacing
    Shlykov E.S.
    Ablyaz T.R.
    Muratov K.R.
    Tokarev D.I.
    Russian Engineering Research, 2020, 40 (10) : 876 - 877
  • [27] Optimization of Surface Quality of mild steel Machined by Wire EDM using Simulated Annealing Algorithm
    Khan, Ahsan Ali
    Al Hazza, Muataz Hazza F.
    Daud, Mohd Radzi Hj Che
    Kamal, Nor Shahirah Bt Mohamad
    2015 4TH INTERNATIONAL CONFERENCE ON ADVANCED COMPUTER SCIENCE APPLICATIONS AND TECHNOLOGIES (ACSAT), 2015, : 3 - 8
  • [28] EFFECT OF ABRASIVE TYPE ON THE SURFACE ROUGHNESS AND MRR IN MAF OF AISI 304 STEEL
    Celik, Mahmut
    Gurun, Hakan
    Caydas, Ulas
    SURFACE REVIEW AND LETTERS, 2021, 28 (12)
  • [29] PARAMETRIC INFLUENCE AND OPTIMIZATION OF WIRE EDM OF HOT DIE STEEL
    Kuruvila, Nixon
    Ravindra, H., V
    MACHINING SCIENCE AND TECHNOLOGY, 2011, 15 (01) : 47 - 75
  • [30] Examination of machining parameters on surface roughness in EDM of tool steel
    Kiyak, M.
    Cakir, O.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 191 (1-3) : 141 - 144
12345