Optimization of Recast Layer Thickness and Surface Roughness in the Wire EDM Process of AISI H13 Tool Steel using Taguchi and Fuzzy Logic

被引：12

作者：

Rupajati, Pathya ^{[1
]}

Soepangkat, Bobby O. P. ^{[1
]}

Pramujati, Bambang ^{[1
]}

Agustin, H. C. Kis ^{[1
]}

机构：

[1] Inst Teknol Sepuluh Nopember ITS, Dept Mech Engn, Lab Mfg Proc, Surabaya 60111, Indonesia

来源：

ADVANCES IN APPLIED MECHANICS AND MATERIALS | 2014年 / 493卷

关键词：

Taguchi; fuzzy logic; wire EDM; recast layer thickness; surface roughness; AISI H13; OF-THE-ART;

D O I：

10.4028/www.scientific.net/AMM.493.529

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this study, the optimization of recast layer thickness and surface roughness (SR) simultaneously in a Wire-EDM process by using Taguchi method with fuzzy logic has been applied. The Wire- EDM process parameters (arc on time, on time, open voltage, off time and servo voltage) were optimized with considerations of multiple performance characteristics, i.e., recast layer thickness and SR. Based on the Taguchi method, an L-18 mixed-orthogonal array table was chosen for the experiments. Fuzzy reasoning of the multiple performance characteristics has been developed based on fuzzy logic, which then converted into a fuzzy reasoning grade or FRG. As a result, the optimization of complicated multiple performance characteristics was transformed into the optimization of single response performance index. Experimental results have shown that machining performance characteristics of Wire-EDM process can be improved effectively through the combination of Taguchi method and fuzzy logic.

引用

页码：529 / 534

页数：6

共 50 条

[1] Multiple Performance characteristics Optimization in the Turning Process of AISI H13 Tool Steel using Taguchi and Fuzzy Logic
Soepangkat, Bobby O. P.
Pramujati, Bambang
Karuniawan, Bayu W.
ADVANCES IN APPLIED MECHANICS AND MATERIALS, 2014, 493 : 583 - +
[2] Effect of process parameters for wire EDM of AISI H13 tool steel
Sadhana, A. Divya
Prakash, J. Udaya
Ananth, S.
Juliyanaa, S. Jebarose
Rubi, C. Sarala
MATERIALS TODAY-PROCEEDINGS, 2022, 52 : 1870 - 1874
[3] Optimization of Multiple Performance Characteristics in the Wire EDM Process of AISI D2 Tool Steel using Taguchi and Fuzzy Logic
Soepangkat, Bobby O. P.
Pramujati, Bambang
Lusi, Nuraini
ADVANCES IN MATERIALS, PROCESSING AND MANUFACTURING, 2013, 789 : 320 - +
[4] Estimation of Recast Layer Thickness in Rotary Tool EDM Process for Machining AISI D3 Tool Steel
Dwivedi, Anand Prakash
Choudhury, Sounak Kumar
MATERIALS TODAY-PROCEEDINGS, 2017, 4 (10) : 10816 - 10822
[5] Optimization of gap of width and surface roughness in wire cut EDM of AISI O1 using the Taguchi - fuzzy method
Rupajati, P.
Rasyid, M. K.
Nurdin, A.
9TH INTERNATIONAL CONFERENCE ON PHYSICS AND ITS APPLICATIONS (ICOPIA), 2019, 1153
[6] SURFACE ROUGHNESS AND WEAR BEHAVIOR OF LASER MACHINED AISI H13 TOOL STEEL
Kasman, S.
Saklakoglu, I. E.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 1264 - +
[7] An investigation on machined performance and recast layer properties of AISI H13 steel by Powder Mixed-EDM in fine-finishing process
Van Tao Le
MATERIALS CHEMISTRY AND PHYSICS, 2022, 276
[8] Parametric study of die sinking EDM process on AISI H13 tool steel using statistical techniques
Bose, G. K.
Mahapatra, K. K.
ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT, 2014, 9 (04): : 168 - 180
[9] Multiple Performance Optimization in the Wire EDM Process of SKD61 Tool Steel using Taguchi Grey Relational Analysis and Fuzzy Logic
Lusi, Nuraini
Bobby, O. P. S.
Pramujati, Bambang
Agustin, H. C. Kis
ADVANCES IN APPLIED MECHANICS AND MATERIALS, 2014, 493 : 523 - 528
[10] THE EFFECT OF SCAN SPEED ON ENGRAVING DEPTH AND SURFACE ROUGHNESS OF AISI H13 TOOL STEEL
Kasman, S.
Saklakoglu, I. E.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 1258 - +

← 1 2 3 4 5 →