Turning of Aluminum Alloy Al-6063 under Dry and Wet Condition using CVD Coated Tool

被引：2

作者：

Zakaria, M. S. ^{[1
]}

Afiq, Adam ^{[1
]}

Hafiz, Muhammad ^{[1
]}

Jamalludin, Mohd Riduan ^{[1
]}

Rosli, M. U. ^{[1
]}

Rahim, Wan M. Faizal Wan A. ^{[1
]}

Ishak, Muhammad Ikman ^{[1
]}

Khor, C. Y. ^{[1
]}

Nawi, M. A. M. ^{[1
]}

Shahrin, Suhaimi ^{[1
]}

机构：

[1] Univ Malaysia Perlis, Fac Engn Technol, KampusUniCITI Alam, Padang Besar 02100, Perlis, Malaysia

来源：

GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS | 2018年 / 2030卷

关键词：

PERFORMANCE; SPEED;

D O I：

10.1063/1.5066670

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

In present paper, cutting parameters are investigated in turning of Al-6063 using carbide inserts based on two level factorial design. The cutting insert with CVD coated TiC + Al2O3 + TiN. Experiments is conducted in dry and wet condition. The selected cutting parameters for turning process are cutting speed, feed rate and depth of cut with each two levels, maintaining nose radius and rake angle. It is found feed rate is the most significant factor affecting surface roughness and followed by cutting speed and depth of cut. The minimum surface roughness is obtained when low feed rate and low cutting speed are employed in wet condition.

引用

页数：5

共 50 条

[41] Effect of sodium chloride on corrosion behavior of low-alloy steels under wet and dry condition
Nishimura, T
Kodama, T
Kurosawa, K
CORROSION AND CORROSION CONTROL IN SALTWATER ENVIRONMENTS, 2000, 99 (26): : 87 - 96
[42] The Optimum Cutting Condition when High Speed Turning of Aluminum Alloy using Uncoated Carbide
Umroh, B.
Muhathir
Darianto
1ST INTERNATIONAL CONFERENCE ON INDUSTRIAL AND MANUFACTURING ENGINEERING, 2019, 505
[43] Experimental study on cutting temperature and cutting force in dry turning of titanium alloy using a non-coated micro-grooved tool
Xie, J.
Luo, M. J.
Wu, K. K.
Yang, L. F.
Li, D. H.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2013, 73 : 25 - 36
[44] Electrochemical noise study on 2024-T3 Aluminum alloy corrosion in simulated acid rain under cyclic wet-dry condition
Shi, Yanyan
Zhang, Zhao
Su, Jingxin
Cao, Fahe
Zhang, Jianqing
ELECTROCHIMICA ACTA, 2006, 51 (23) : 4977 - 4986
[45] High speed continuous and interrupted dry turning of A390 Aluminum/Silicon Alloy using nanostructured diamond coated WC-6 wt.% cobalt tool inserts by MPCVD
Liang, Qi
Vohra, Yogesh K.
Thompson, Raymond
DIAMOND AND RELATED MATERIALS, 2008, 17 (12) : 2041 - 2047
[46] Modeling of Tool Wear in Turning EN 31 Alloy Steel using Coated Carbide Inserts
Sethi, Davinder
Kumar, Vinod
INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING, 2012, 2 (03) : 34 - 51
[47] Wear Mechanism of PVD TIAIN Coated Cemented Carbide Tool in Dry Turning Titanium Alloy TC4
Wang, Baolin
Ai, Xing
Liu, Zhanqiang
Liu, Jigang
ADVANCES IN MATERIALS AND MATERIALS PROCESSING, PTS 1-3, 2013, 652-654 : 2200 - 2204
[48] Investigation of Tool Entry Strategy when Pocket Milling Titanium Alloy, Ti-6Al-4V under Wet Condition
Ramli, A. S.
Sharif, S.
Said, A. Y. M.
Yusop, M. S. M.
Karim, Z.
Mohruni, A. S.
5TH INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2019 (ICONGDM 2019), 2019, 2129
[49] Turning Machinability of Short Alumina Fiber Reinforced Aluminum Alloy Composite Using Carbide Tool
Asano, Kazunori
MATERIALS TRANSACTIONS, 2015, 56 (07) : 1120 - 1126
[50] Tool Wear and Surface Roughness in Turning of Metal Matrix Composite Built of Al2O3 Sinter Saturated by Aluminum Alloy in Vacuum Condition
Szymanski, Michal
Przestacki, Damian
Szymanski, Pawel
MATERIALS, 2022, 15 (23)

← 1 2 3 4 5 →