Modeling of Tool Wear in Turning EN 31 Alloy Steel using Coated Carbide Inserts

被引：2

作者：

Sethi, Davinder ^{[1
]}

Kumar, Vinod ^{[2
]}

机构：

[1] Chandigarh Engn Coll Landran, Dept Mech Engn, Mohali, Punjab, India

[2] Thapar Univ, Mech Engn Dept, Patiala, Punjab, India

来源：

INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING | 2012年 / 2卷 / 03期

关键词：

Central Composite Design; Coated Carbide Inserts; Flank Wear; Response Surface Methodology; Tool Wear;

D O I：

10.4018/ijmmme.2012070103

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The experimental investigations of the tool wear in turning of EN 31 alloy steel at different cutting parameters are reported in this paper. Mathematical model has been developed for flank wear using response surface methodology. This mathematical model correlates independent cutting parameters viz. cutting speed, feed rate and depth of cut with dependent parameters of flank wear. This model is capable of estimating the tool wear at different cutting conditions. The central composite design has been used to plan the experiments. Coated carbide inserts have been used for turning EN 31 alloy steel. Results revealed that cutting speed is the most significant factor effecting flank wear, followed by depth of cut and feed rate. Flank wear increases with increase in all the three cutting parameters.

引用

页码：34 / 51

页数：18

共 50 条

[1] WEAR OF COATED CARBIDE INSERTS IN TURNING
GUREVICH, DM
[J]. RUSSIAN ENGINEERING JOURNAL, 1979, 59 (06): : 45 - 47
[2] Investigation on tool wear and chip morphology in hard turning of EN 31 steel using AlTiN-PVD coated carbide cutting tool
Khatai, Saswat
Kumar, Ramanuj
Sahoo, Ashok Kumar
Panda, Amlana
[J]. MATERIALS TODAY-PROCEEDINGS, 2022, 59 : 1810 - 1816
[3] Analyses of Tool Wear and Chip Type for Different Coated Carbide Inserts in Turning Hardened 1.6582 Steel
Sramhauser, Karel
Naprstkova, Natasa
Sviantek, Jan
Stancekova, Dana
Nguyen Van Tuong
Novotny, Jan
[J]. COATINGS, 2022, 12 (07)
[4] Tool Wear of PVD Coated Carbide Inserts in High Speed Turning Inconel 718
Song, X. Y.
Zhao, J.
[J]. ADVANCED MECHANICAL ENGINEERING, PTS 1 AND 2, 2010, 26-28 : 988 - 992
[5] On the wear of coated carbide inserts in high-speed turning of AISI 1045 steel
Balaji, A
Varghese, V
Jayal, AD
[J]. TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME 2005, VOL 33, 2005, 2005, 33 : 557 - 564
[6] Turning of hardened AISI 4340 steel using coated carbide inserts
de Lima, I. G.
de Avila, R. F.
Abrao, A. M.
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2007, 221 (08) : 1359 - 1366
[7] Tool wear and machining performance of cBN-TiN coated carbide inserts and PCBN compact inserts in turning AISI 4340 hardened steel
More, Abhijeet S.
Jiang, Wenping
Brown, W. D.
Malshe, Ajay P.
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 180 (1-3) : 253 - 262
[8] Tool Wear of Carbide Cutting Inserts Coated with TiAlN and AlTiSiN in Finish Turning of Inconel 718
Lisowicz, Joanna
Habrat, Witold
Krupa, Krzysztof
Fieden, Mateusz
[J]. ADVANCES IN MANUFACTURING ENGINEERING AND MATERIALS II, ICMEM 2020, 2021, : 226 - 235
[9] EXPERIMENTAL INVESTIGATIONS ON SURFACE ROUGHNESS, CUTTING FORCES AND TOOL WEAR IN TURNING OF SUPER DUPLEX STAINLESS STEEL WITH COATED CARBIDE INSERTS
Kadam, Shirish
Khake, Rohit
Mudigonda, Sadaiah
[J]. PROCEEDINGS OF THE ASME 12TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2017, VOL 2, 2017,
[10] Tool wear in finish turning of medium carbon steel with coated carbide tools
Ezugwu, EO
[J]. LUBRICATION ENGINEERING, 1997, 53 (11): : 25 - 31

← 1 2 3 4 5 →