Tool Wear of PVD Coated Carbide Inserts in High Speed Turning Inconel 718

被引：0
|
作者：
Song, X. Y. [1 ]
Zhao, J. [1 ]
机构：
[1] Shandong Univ, Sch Mech Engn, MOE, Key Lab High Efficiency & Clean Mech Mfg, Jinan 250061, Peoples R China
来源：
ADVANCED MECHANICAL ENGINEERING, PTS 1 AND 2 | 2010年 / 26-28卷
关键词：
High-speed turning; Nickel based alloy; Wear mechanism; MECHANISMS;
D O I：
10.4028/www.scientific.net/AMM.26-28.988
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
TiAlN/TiN multilayer PVD coated carbide is one of the dominant tool materials for the turning applications of Inconel 718 due to its high hardness, high wear resistance, and high thermal stability. The results of a thorough investigation on TiAlN/TiN multi layer PVD coated carbide inserts were presented for turning Inconel 718. The tool wear of the PVD coated carbide inserts were tested and analyzed at different cutting speeds from 50m/min to 90m/min and different feed rates from 0.1mm/r to 0.4mm/r. The wear patterns and wear mechanisms of PVD coated carbide were analyzed. Results show that the dominant wear patterns are rake face wear, flank wear, micro-chipping, coating delamination, notch wear, built-up edge and breakage. The main wear mechanisms are adhesion, diffusion, abrasive and oxidation.
引用
收藏
页码：988 / 992
页数：5
相关论文
共 50 条
  • [1] Tool Wear of PVD Coated Carbide Tool When Finish Turning Inconel 718 under High Speed Machining
    Yazid, M. Z. A.
    Hassan, Che C. H.
    Jaharah, A. G.
    Gusri, A. I.
    Yasir, Ahmad M. S. B.
    MATERIALS AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2010, 129-131 : 1004 - +
  • [2] The Effects of Cutting Speed on Tool Wear and Tool Life When Turning Inconel 718 with Ceramic and Coated Carbide Inserts
    Taskesen, A.
    Altin, A.
    Nalbant, M.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2007, 60 (04) : 445 - 449
  • [3] Wear characteristics and wear control method of PVD-coated carbide tool in turning Inconel 718
    ZhaoPeng Hao
    YiHang Fan
    JieQiong Lin
    ZhiXin Yu
    The International Journal of Advanced Manufacturing Technology, 2015, 78 : 1329 - 1336
  • [4] Wear characteristics and wear control method of PVD-coated carbide tool in turning Inconel 718
    Hao, ZhaoPeng
    Fan, YiHang
    Lin, JieQiong
    Yu, ZhiXin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 78 (5-8): : 1329 - 1336
  • [5] Tool Wear of Carbide Cutting Inserts Coated with TiAlN and AlTiSiN in Finish Turning of Inconel 718
    Lisowicz, Joanna
    Habrat, Witold
    Krupa, Krzysztof
    Fieden, Mateusz
    ADVANCES IN MANUFACTURING ENGINEERING AND MATERIALS II, ICMEM 2020, 2021, : 226 - 235
  • [6] High speed cutting of Inconel 718 with coated carbide and ceramic inserts
    Li, L
    He, N
    Wang, M
    Wang, ZG
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 129 (1-3) : 127 - 130
  • [7] High Speed Cutting Inconel 718 with Coated Carbide and Ceramic Inserts
    LI Liang
    厦门大学学报(自然科学版), 2002, (S1) : 44 - 45
  • [8] Progressive Tool Failure in High Speed End Milling of Inconel 718 with Coated Carbide Inserts
    Li, A. H.
    Zhao, J.
    Pei, Z. Q.
    Cuo, S. G.
    HIGH SPEED MACHINING, 2011, 188 : 32 - +
  • [9] Experimental Investigation of High-Speed Turning of INCONEL 718 Using PVD-Coated Carbide Tool Under Wet Condition
    Chaurasia, Ankur
    Wankhede, Vishal
    Chaudhari, Rakesh
    INNOVATIONS IN INFRASTRUCTURE, 2019, 757 : 367 - 374
  • [10] High speed turning of Inconel 718 using PVD-coated PCBN tools
    Soo, Sein Leung
    Khan, Sarmad A.
    Aspinwall, David K.
    Harden, Peter
    Mantle, Andrew L.
    Kappmeyer, Gregor
    Pearson, David
    M'Saoubi, Rachid
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2016, 65 (01) : 89 - 92
12345