Drilling Process on CFRP: Multi-Criteria Decision-Making with Entropy Weight Using Grey-TOPSIS Method

被引:17
|
作者
Tran, Quang-Phuoc [1 ]
Nguyen, Van-Nhat [2 ]
Huang, Shyh-Chour [1 ]
机构
[1] Natl Kaohsiung Univ Appl Sci, Dept Mech Engn, Kaohsiung 80778, Taiwan
[2] Hung Yen Univ Technol & Educ, Fac Mech Engn, Hung Yen 160000, Vietnam
来源
APPLIED SCIENCES-BASEL | 2020年 / 10卷 / 20期
关键词
CFRP; uncut fiber; delamination; entropy weight; TOPSIS; PROCESS PARAMETERS; MULTIOBJECTIVE OPTIMIZATION; MACHINING PARAMETERS; SELECTION; COMPOSITE; DELAMINATION; ALGORITHM; CRITERIA; COOLANT;
D O I
10.3390/app10207207
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Moisture strongly affects the quality and mechanical specificity of carbon fiber reinforced plastic (CFRP) when using lubrication fluids during machining, and the significant impact of the cutting tool geometry and cryogenic gas cooling on CFRP machining capabilities are observed. The main body of this paper aims at making decisions about the optimum parameter of the drilling process while machining on CFRP base on the grey relational coefficient embed to the technique for order of preference by similarity to an ideal solution (Grey-TOPSIS). The entropy method was used to determine the weight of decision-making for handling a multiple measure decision-making response. The twist angle of the tool drill, lubrication, and feed rate were used as the input variables, and were analyzed while taking into account several multi-response outputs, such as the surface roughness, uncut fiber, and delamination. The result showed that a feed rate of 228 mm/min, the high-helix twist angle, and cryogenic CO2 lubrication leads the calculated value to close the relative value, which minimizes the value of the surface roughness, the uncut fiber, and the delamination. Finally, verification of the valid effect of each parameter process was conducted using analysis of variance. The results indicated that the lubrication was the highest remarkable criterion on the uncut fiber, the delamination, and the surface roughness. By integrating the advantage of grey systems theory, and the technique for order preference by similarity to an ideal solution, to evaluate and optimize the machining parameter, the results indicate that the proposed model is useful to facilitate the multi-criteria decision-making problem under the environment of uncertainty and vagueness. This relatively advanced approach is very effectual in rejecting process variation and a great assistive strategy than other multi-criteria decision-making approaches.
引用
收藏
页码:1 / 18
页数:18
相关论文
共 50 条
  • [11] Catchment-Wide Wetland Assessment and Prioritization Using the Multi-Criteria Decision-Making Method TOPSIS
    Canran Liu
    Paul Frazier
    Lalit Kumar
    Catherine Macgregor
    Nigel Blake
    Environmental Management, 2006, 38 : 316 - 326
  • [12] TOWARDS QUALITY ASSURANCE OF THE STUDY PROCESS USING THE MULTI-CRITERIA DECISION-MAKING METHOD
    Labanauskis, Rimvydas
    Kasparaviciute, Aurelija
    Davidaviciene, Vida
    Deltuviene, Dovile
    ENTREPRENEURSHIP AND SUSTAINABILITY ISSUES, 2018, 6 (02): : 798 - 818
  • [13] Intuitionistic fuzzy entropy and distance measure based TOPSIS method for multi-criteria decision making
    Joshi, Deepa
    Kumar, Sanjay
    EGYPTIAN INFORMATICS JOURNAL, 2014, 15 (02) : 97 - 104
  • [14] Multi-Criteria Decision-Making
    Encheva, Sylvia
    MICBE '09: PROCEEDINGS OF THE 10TH WSEAS INTERNATIONAL CONFERENCE ON MATHEMATICS AND COMPUTERS IN BUSINESS AND ECONOMICS, 2009, : 192 - +
  • [15] Multi-Criteria Decision-Making with Imprecise Scores and BF-TOPSIS
    Dezert, Jean
    Han, Deqiang
    Tacnet, Jean-Marc
    2017 20TH INTERNATIONAL CONFERENCE ON INFORMATION FUSION (FUSION), 2017, : 751 - 758
  • [16] TOPSIS in Multi-Criteria Decision Making: A Survey
    Panda, Monalisa
    Jagadev, Alok Kumar
    2ND INTERNATIONAL CONFERENCE ON DATA SCIENCE AND BUSINESS ANALYTICS (ICDSBA 2018), 2018, : 51 - 54
  • [17] Generalized Neutrosophic TOPSIS to Solve Multi-Criteria Decision-Making Problems
    Zulqarnain R.M.
    Xin X.L.
    Saeed M.
    Smarandache F.
    Ahmad N.
    Xin, Xiao Long (xlxin@nwu.edu.cn), 1600, University of New Mexico (38): : 276 - 292
  • [18] Method for grey-stochastic multi-criteria decision-making based on regret theory
    Qian L.-L.
    Liu S.-F.
    Fang Z.-G.
    Liu Y.
    Qian, Li-Li (liliqianlili@126.com), 2017, Northeast University (32): : 1069 - 1074
  • [19] Decision-making for multi-criteria optimization of process planning
    Arquis E.
    Delolme L.
    Antomarchi A.-L.
    Durieux S.
    Duc E.
    Mechanics and Industry, 2019, 20
  • [20] Assessing business process orientation using multi-criteria decision-making
    Viegas, Renan Alves
    Costa, Ana Paula Cabral Seixas
    BUSINESS PROCESS MANAGEMENT JOURNAL, 2023, 29 (02) : 352 - 368