Selected physical and mechanical properties of resin infused porous carbon composites made from medium density fiberboard

被引：0

作者：

Xie, Xinfeng ^{[1
]}

Goodell, Barry ^{[1
]}

Nagle, Dennis ^{[2
]}

Zhang, Dajie ^{[2
]}

Lopez-Anido, Roberto ^{[1
]}

机构：

[1] Univ Maine, Orono, ME 04469 USA

[2] Johns Hopkins Univ, Adv Technol Lab, Baltimore, MD USA

来源：

FOREST PRODUCTS JOURNAL | 2009年 / 59卷 / 05期

关键词：

WOOD; CERAMICS; ATMOSPHERE;

D O I：

暂无

中图分类号：

S7 [林业];

学科分类号：

0829 ; 0907 ;

摘要：

Carbon/polymer composites were made by infusing carbonized medium density fiberboard (CMDF) with a phenolic resin and an epoxy resin under vacuum. The porosity of the materials was measured by mercury porosimetry, and mechanical properties were characterized using four-point bending tests, tensile tests, and single-edge notch bending fracture toughness tests according to ASTM standards. The results showed that the density of the epoxy resin infused samples was 2 1 percent higher than that of phenolic resin infused samples. The epoxy resin infused CMDF was more than 50 percent stronger than the phenolic resin infused CMDF in tensile and bending strength. The plane-strain fracture toughness of epoxy resin infused CMDF was 50 percent greater than that of phenolic resin infused CMDF.

引用

页码：25 / 28

页数：4

共 50 条

[41] Electrical properties of biomorphic SiC ceramics and SiC/Si composites fabricated from medium density fiberboard
Orlova, T. S.
Popov, V. V.
Quispe Cancapa, J.
Hernandez Maldonado, D.
Enrique Magarino, E.
Varela Feria, F. M.
Ramirez de Arellano, A.
Martinez Fernandez, J.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, 31 (07) : 1317 - 1323
[42] Mechanical properties of porous carbon materials made from rice hull
Shishido, M.
Kubo, S.
Takahashi, T.
Iizuka, H.
Transactions of the Materials Research Society of Japan, Vol 31, No 4, 2006, 31 (04): : 993 - 996
[43] Wollastonite to Improve Fire Properties in Medium-Density Fiberboard Made from Wood and Chicken Feather Fibers
Taghiyari, Hamid R.
Morrell, Jeffrey J.
Papadopoulos, Antonios N.
APPLIED SCIENCES-BASEL, 2021, 11 (07):
[44] Effect of carbon dioxide injection on production of wood cement composites from waste medium density fiberboard (MDF)
Qi, H
Cooper, PA
Wan, H
WASTE MANAGEMENT, 2006, 26 (05) : 509 - 515
[45] INFLUENCE OF ALDEHYDES ON SELECTED MECHANICAL-PROPERTIES OF RESIN COMPOSITES
PEUTZFELDT, A
ASMUSSEN, E
JOURNAL OF DENTAL RESEARCH, 1992, 71 (08) : 1522 - 1524
[46] INFLUENCE OF KETONES ON SELECTED MECHANICAL-PROPERTIES OF RESIN COMPOSITES
PEUTZFELDT, A
ASMUSSEN, E
JOURNAL OF DENTAL RESEARCH, 1992, 71 (11) : 1847 - 1850
[47] Physical and mechanical properties of composites made from bamboo and woody wastes in Taiwan
Chung, Min Jay
Wang, Sheng Yang
JOURNAL OF WOOD SCIENCE, 2019, 65 (01)
[48] Physical and mechanical properties of composites made from bamboo and woody wastes in Taiwan
Min Jay Chung
Sheng Yang Wang
Journal of Wood Science, 2019, 65
[49] Some of the physical and mechanical properties of composites made from Tetra Pak/LDPE
Ebadi, Masoud
Farsi, Mohammad
Narchin, Parvaneh
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2018, 31 (08) : 1054 - 1065
[50] The effect of storage time and humidity on mechanical and physical properties of medium density fiberboard (MDF) from oil palm empty fruit bunch and rubberwood
Khalil, H. P. S. Abdul
Firdaus, M. Y. Nur
Anis, M.
Ridzuan, R.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2008, 47 (10) : 1046 - 1053

← 1 2 3 4 5 →