Selected physical and mechanical properties of resin infused porous carbon composites made from medium density fiberboard

被引：0
|
作者：
Xie, Xinfeng [1 ]
Goodell, Barry [1 ]
Nagle, Dennis [2 ]
Zhang, Dajie [2 ]
Lopez-Anido, Roberto [1 ]
机构：
[1] Univ Maine, Orono, ME 04469 USA
[2] Johns Hopkins Univ, Adv Technol Lab, Baltimore, MD USA
来源：
FOREST PRODUCTS JOURNAL | 2009年 / 59卷 / 05期
关键词：
WOOD; CERAMICS; ATMOSPHERE;
D O I：
暂无
中图分类号：
S7 [林业];
学科分类号：
0829 ; 0907 ;
摘要：
Carbon/polymer composites were made by infusing carbonized medium density fiberboard (CMDF) with a phenolic resin and an epoxy resin under vacuum. The porosity of the materials was measured by mercury porosimetry, and mechanical properties were characterized using four-point bending tests, tensile tests, and single-edge notch bending fracture toughness tests according to ASTM standards. The results showed that the density of the epoxy resin infused samples was 2 1 percent higher than that of phenolic resin infused samples. The epoxy resin infused CMDF was more than 50 percent stronger than the phenolic resin infused CMDF in tensile and bending strength. The plane-strain fracture toughness of epoxy resin infused CMDF was 50 percent greater than that of phenolic resin infused CMDF.
引用
收藏
页码：25 / 28
页数：4
相关论文
共 50 条
  • [31] Medium density boards made of groundwood fibres: an analysis of their mechanical and physical properties
    Bianchi, Sauro
    Thomen, Heiko
    Junginger, Stefan
    Pichelin, Frederic
    EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2019, 77 (01) : 71 - 77
  • [32] Physical Properties of Medium Density Fiberboard Produced with the Addition of ZnO Nanoparticles
    Santos da Silva, Ana Paula
    Ferreira, Bruno Santos
    Favarim, Higor Rogerio
    Felippe Silva, Maria Fernando
    Felippe Silva, Joao Vitor
    Azambuja, Maximiliano dos Anjos
    de Campos, Cristiane Inacio
    BIORESOURCES, 2019, 14 (01): : 1618 - 1625
  • [33] Effect of Iron Oxide Nanoparticles on the Physical Properties of Medium Density Fiberboard
    Gul, Waheed
    Alrobei, Hussein
    Shah, Syed Riaz Akbar
    Khan, Afzal
    POLYMERS, 2020, 12 (12) : 1 - 18
  • [34] Effect of Embedment of MWCNTs for Enhancement of Physical and Mechanical Performance of Medium Density Fiberboard
    Gul, Waheed
    Alrobei, Hussein
    Shah, Syed Riaz Akbar
    Khan, Afzal
    Hussain, Abid
    Asiri, Abdullah M.
    Kim, Jaehwan
    NANOMATERIALS, 2021, 11 (01) : 1 - 18
  • [35] High-density Fiberboard from Wood and Keratin Fibers: Physical and Mechanical Properties
    Acda M.N.
    Current Materials Science, 2022, 15 (02): : 154 - 163
  • [36] Physical and Mechanical Properties of Fiberboard Made of MDF Residues and Phase Change Materials
    Rodriguez, Gustavo E.
    Avila, Cecilia Bustos
    Cloutier, Alain
    FORESTS, 2024, 15 (05):
  • [37] RESEARCHES REGARDING THE MECHANICAL PROPERTIES OF COMPOSITES MADE FROM FELT AND EPOXY RESIN
    Miritoiu, Cosmin Mihai
    Burada, Cristian Oliviu
    REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS, 2020, 50 (01): : 103 - 112
  • [38] Effect of Thermal Treatment of Fast Growing Wood Fibers on Physical and Mechanical Properties of Light Medium Density Fiberboard
    Jarusombuti, Songklod
    Ayrilmis, Nadir
    Fueangvivat, Vallayuth
    Bauchongkol, Piyawade
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2011, 30 (03) : 241 - 246
  • [39] Mechanical properties of medium density fiberboard reinforced with metal and woven synthetic nets
    Mohebby, Behbood
    Tavassoli, Fatemeh
    Kazemi-Najafi, Saeed
    EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2011, 69 (02) : 199 - 206
  • [40] Mechanical and Formaldehyde-related Properties of Medium Density Fiberboard with Zeolite Additive
    Camlibel, Osman
    BIORESOURCES, 2020, 15 (04) : 7918 - 7932
12345