Selected physical and mechanical properties of resin infused porous carbon composites made from medium density fiberboard

被引：0

作者：

Xie, Xinfeng ^{[1
]}

Goodell, Barry ^{[1
]}

Nagle, Dennis ^{[2
]}

Zhang, Dajie ^{[2
]}

Lopez-Anido, Roberto ^{[1
]}

机构：

[1] Univ Maine, Orono, ME 04469 USA

[2] Johns Hopkins Univ, Adv Technol Lab, Baltimore, MD USA

来源：

FOREST PRODUCTS JOURNAL | 2009年 / 59卷 / 05期

关键词：

WOOD; CERAMICS; ATMOSPHERE;

D O I：

暂无

中图分类号：

S7 [林业];

学科分类号：

0829 ; 0907 ;

摘要：

Carbon/polymer composites were made by infusing carbonized medium density fiberboard (CMDF) with a phenolic resin and an epoxy resin under vacuum. The porosity of the materials was measured by mercury porosimetry, and mechanical properties were characterized using four-point bending tests, tensile tests, and single-edge notch bending fracture toughness tests according to ASTM standards. The results showed that the density of the epoxy resin infused samples was 2 1 percent higher than that of phenolic resin infused samples. The epoxy resin infused CMDF was more than 50 percent stronger than the phenolic resin infused CMDF in tensile and bending strength. The plane-strain fracture toughness of epoxy resin infused CMDF was 50 percent greater than that of phenolic resin infused CMDF.

引用

页码：25 / 28

页数：4

共 50 条

[1] Some Physical and Mechanical Properties of Medium-Density Fiberboard Made from Giant Bamboo
Marinho, Nelson Potenciano
do Nascimento, Eduardo Mauro
Nisgoski, Silvana
Valarelli, Ivaldo de Domenico
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2013, 16 (06): : 1387 - 1392
[2] Evaluation of the Physical and Mechanical Properties of Medium Density Fiberboard Made from Old Newsprint Fibers
Nourbakhsh, Amir
Ashori, Alireza
Jahan-Latibari, Ahmad
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2010, 29 (01) : 5 - 11
[3] Mechanical and thermal properties of polystyrene and medium density fiberboard composites
Kreutz, Juliana Cristina
de Souza, Paulo Ricardo
Benetti, Viviane Prima
Freitas, Adonilson dos Reis
Stival Bittencourt, Paulo Rodrigo
Gaffo, Luciana
POLIMEROS-CIENCIA E TECNOLOGIA, 2021, 31 (02):
[4] Selected properties of medium density fiberboard (MDF) panels made from bamboo and rice straw
Dept. of Natural Resource Ecology and Management, Oklahoma State Univ., Stillwater, OK
不详
不详
不详
For Prod J, 2007, 6 (46-50):
[5] Selected properties of medium density fiberboard (MDF) panels made from bamboo and rice straw
Hiziroglu, Salim
Bauchongkol, Piyawade
Fueangvivat, Vallayuth
Soontonbura, Worakit
Jarusombuti, Songklod
FOREST PRODUCTS JOURNAL, 2007, 57 (06) : 46 - 50
[6] Physical and mechanical properties of binderless medium density fiberboard (MDF) from coconut fiber
Puspaningrum, T.
Haris, Y. H.
Sailah, I
Yani, M.
Indrasti, N. S.
INTERNATIONAL CONFERENCE ON INNOVATION IN TECHNOLOGY AND MANAGEMENT FOR SUSTAINABLE AGROINDUSTRY (ITAMSA 2019), 2020, 472
[7] Influence of compression wood on physical and mechanical properties of medium density fiberboard
Akbulut, T
Ayrilmis, N
Koc, E
WOOD RESEARCH, 2004, 49 (03) : 17 - 24
[8] MEDIUM DENSITY FIBERBOARD MADE FROM PHENOLIC RESIN AND WOOD RESIDUES OF MIXED SPECIES
CHOW, P
ZHAO, L
FOREST PRODUCTS JOURNAL, 1992, 42 (10) : 65 - 67
[9] Low resin medium density fiberboard made from chemical activated hardwoods fibers
Doosthoseini K.
Zarea-Hosseinabadi H.
Moradpour P.
Journal of the Indian Academy of Wood Science, 2010, 7 (1-2) : 36 - 42
[10] Organo-silane compounds in medium density fiberboard: physical and mechanical properties
Hamid Reza Taghiyari
Ali Karimi
Paridah Md. Tahir
Journal of Forestry Research, 2015, 26 : 495 - 500

← 1 2 3 4 5 →