Selected physical and mechanical properties of resin infused porous carbon composites made from medium density fiberboard

被引：0
|
作者：
Xie, Xinfeng [1 ]
Goodell, Barry [1 ]
Nagle, Dennis [2 ]
Zhang, Dajie [2 ]
Lopez-Anido, Roberto [1 ]
机构：
[1] Univ Maine, Orono, ME 04469 USA
[2] Johns Hopkins Univ, Adv Technol Lab, Baltimore, MD USA
来源：
FOREST PRODUCTS JOURNAL | 2009年 / 59卷 / 05期
关键词：
WOOD; CERAMICS; ATMOSPHERE;
D O I：
暂无
中图分类号：
S7 [林业];
学科分类号：
0829 ; 0907 ;
摘要：
Carbon/polymer composites were made by infusing carbonized medium density fiberboard (CMDF) with a phenolic resin and an epoxy resin under vacuum. The porosity of the materials was measured by mercury porosimetry, and mechanical properties were characterized using four-point bending tests, tensile tests, and single-edge notch bending fracture toughness tests according to ASTM standards. The results showed that the density of the epoxy resin infused samples was 2 1 percent higher than that of phenolic resin infused samples. The epoxy resin infused CMDF was more than 50 percent stronger than the phenolic resin infused CMDF in tensile and bending strength. The plane-strain fracture toughness of epoxy resin infused CMDF was 50 percent greater than that of phenolic resin infused CMDF.
引用
收藏
页码：25 / 28
页数：4
相关论文
共 50 条
  • [21] Mechanical and physical properties of medium density fiberboard panels laminated with thermally compressed veneer
    Buyuksari, Umit
    Hiziroglu, Salim
    Akkilic, Huseyin
    Ayrilmis, Nadir
    COMPOSITES PART B-ENGINEERING, 2012, 43 (02) : 110 - 114
  • [22] Effect of Alumina Nano-Particles on Physical and Mechanical Properties of Medium Density Fiberboard
    Alabduljabbar, Hisham
    Alyousef, Rayed
    Gul, Waheed
    Shah, Syed Riaz Akbar
    Khan, Afzal
    Khan, Razaullah
    Alaskar, Abdulaziz
    MATERIALS, 2020, 13 (18)
  • [23] Selected Properties of Corrugated Particleboards Made from Bamboo Waste (Phyllostachys edulis) Laminated with Medium-Density Fiberboard Panels
    Yang, Feng
    Fei, Benhua
    Wu, Zhengxin
    Peng, Liang
    Yu, Yunshui
    BIORESOURCES, 2014, 9 (01): : 1085 - 1096
  • [24] Influence of hydrothermal modification of fibers on some physical and mechanical properties of medium density fiberboard (MDF)
    Mohebby, Behbood
    Ilbeighi, Firooz
    Kazemi-Najafi, Saeid
    HOLZ ALS ROH-UND WERKSTOFF, 2008, 66 (03) : 213 - 218
  • [25] Effect of Resination Technique on Mechanical Properties of Medium Density Fiberboard
    Ayrilmis, Nadir
    Kara, M. Erdal
    BIORESOURCES, 2013, 8 (01): : 420 - 426
  • [26] Effect of resination technique on mechanical properties of medium density fiberboard
    Ayrilmis, N. (nadiray@istanbul.edu.tr), 1600, North Carolina State University (08):
  • [27] Mechanical and Physical Properties of Green Biocomposite Based on Medium Density Fiberboard Sanding Powder/Polyethylene/Nanoclay
    Madhoushi, Mehrab
    Shahrebabak, Amineh Behzadi
    JOURNAL OF POLYMERS AND THE ENVIRONMENT, 2017, 25 (02) : 221 - 228
  • [28] ADSORPTION OF NANOWOLLASTONITE ON CELLULOSE SURFACE: EFFECTS ON PHYSICAL AND MECHANICAL PROPERTIES OF MEDIUM-DENSITY FIBERBOARD (MDF)
    Taghiyari, Hamid Reza
    Majidi, Roya
    Jahangiri, Asghar
    CERNE, 2016, 22 (02) : 215 - 222
  • [29] Mechanical and Physical Properties of Green Biocomposite Based on Medium Density Fiberboard Sanding Powder/Polyethylene/Nanoclay
    Mehrab Madhoushi
    Amineh Behzadi Shahrebabak
    Journal of Polymers and the Environment, 2017, 25 : 221 - 228
  • [30] Medium density boards made of groundwood fibres: an analysis of their mechanical and physical properties
    Sauro Bianchi
    Heiko Thömen
    Stefan Junginger
    Frédéric Pichelin
    European Journal of Wood and Wood Products, 2019, 77 : 71 - 77
12345