A Finite Element Analysis Based Sensitivity Studies on Pull Out Strength of Pedicle Screw in Synthetic Osteoporotic Bone Models

被引：0
|
作者：
Varghese, Vicky [1 ]
Kumar, G. Saravana [2 ]
Venkatesh, K. [3 ]
机构：
[1] IIT Madras, Dept Biotechnol, Madras 600036, Tamil Nadu, India
[2] IIT Madras, Dept Engn Design, Madras 600036, Tamil Nadu, India
[3] Christian Med Coll & Hosp, Dept Orthoped, Spinal Disorders Surg Unit, Vellore 632004, Tamil Nadu, India
来源：
2016 IEEE EMBS CONFERENCE ON BIOMEDICAL ENGINEERING AND SCIENCES (IECBES) | 2016年
关键词：
HUMAN SPINE; FIXATION; DESIGN; INSTRUMENTATION; THORACOLUMBAR; VIVO;
D O I：
暂无
中图分类号：
R318 [生物医学工程];
学科分类号：
0831 ;
摘要：
Pullout strength of pedicle screw is an important index used by surgeon and engineers for design and development of the implant. Increasing pullout strength is difficult since it is dependent on several factors such as density of bone, insertion technique etc. Current study uses a validated 2 D FE model of pullout strength experiment to study the effect of number of threads, inner and outer diameter and thread geometry on holding power of pedicle screw in a synthetic osteoporotic bone model. It was found that outer diameter has highest effect on pullout strength of pedicle screw. Coarser thread provides better holding power in an osteoporotic bone. This study can be used for developing screws with improved holding power in osteoporotic bone.
引用
收藏
页码：382 / 387
页数：6
相关论文
共 50 条
  • [31] Analysis of the Screw Thread Connection Strength Based on Nonlinear Finite Element Method
    Sun, Fu
    FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY III, PTS 1-3, 2013, 401 : 55 - 58
  • [32] Finite element analysis of Stryker Xia pedicle screw in artificial bone samples with and without supplemental cement augmentation
    Pfeiffer, Ferris M.
    Choma, Theodore J.
    Kueny, Rebecca
    COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 2015, 18 (13) : 1459 - 1467
  • [33] Cancellous bone screw purchase: a comparison of synthetic femurs, human femurs, and finite element analysis
    Zdero, R.
    Olsen, M.
    Bougherara, H.
    Schemitsch, E. H.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2008, 222 (H8) : 1175 - 1183
  • [34] Experimental study on the loosening of pedicle screws implanted to synthetic bone vertebra models and under non-pull-out mechanical loads
    Nowak, Bartosz
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2019, 98 : 200 - 204
  • [35] Pull out strength of the screw and compression force of vertebra gain with a 3-month course of romosozumab treatment: Prospective study using finite element analysis
    Ishikawa, Koji
    Tani, Soji
    Tsuchiya, Koki
    Hasegawa, Hiro
    Negishi-Koga, Takako
    Kudo, Yoshifumi
    Shirahata, Toshiyuki
    Nagai, Takashi
    Toyone, Tomoaki
    Inagaki, Katsunori
    JOURNAL OF BONE AND MINERAL RESEARCH, 2020, 35 : 72 - 72
  • [36] Effect of a pedicle-screw-based motion preservation system on lumbar spine biomechanics: A probabilistic finite element study with subsequent sensitivity analysis
    Rohlmann, Antonius
    Boustani, Hadi Nabil
    Bergmann, Georg
    Zander, Thomas
    JOURNAL OF BIOMECHANICS, 2010, 43 (15) : 2963 - 2969
  • [37] Patient-specific mechanical analysis of pedicle screw insertion in simulated osteoporotic spinal bone models derived from medical images
    Nishida, Norihiro
    Suzuki, Hidenori
    Tetsu, Hanvey
    Morishita, Yuki
    Kumaran, Yogesh
    Jiang, Fei
    Funaba, Masahiro
    Fujimoto, Kazuhiro
    Ichihara, Yusuke
    Sakai, Takashi
    Ohgi, Junji
    ASIAN SPINE JOURNAL, 2024,
  • [38] Assessing the biomechanical properties of nitinol staples in normal, osteopenic and osteoporotic bone models: A finite element analysis
    Curenton, Tanetta L.
    Davis, Brian L.
    Darnley, James E.
    Weiner, Scott D.
    Owusu-Danquah, Josiah S.
    INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED, 2021, 52 (10): : 2820 - 2826
  • [39] Influence of bone quality and pedicle screw design on the fixation strength during Axial Pull-out test: A 2D Axisymmetric FE study
    Makaram, Harikrishna
    Swaminathan, Ramakrishnan
    2021 43RD ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE & BIOLOGY SOCIETY (EMBC), 2021, : 4924 - 4927
  • [40] Finite element analysis for prediction of adolescent bone strength: micro vs continuum models
    Ouhsousou, S.
    Revel, M.
    Bacchetta, J.
    Follet, H.
    COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 2020, 23 : S212 - S214
12345