HOT DEFORMATION OF 6XXX SERIES ALUMINIUM ALLOYS

被引：10
|
作者：
Mrowka-Nowotnik, G. [1 ]
Sieniawski, J. [1 ]
Kotowski, S. [1 ]
Nowotnik, A. [1 ]
Motyka, M. [1 ]
机构：
[1] Rzeszow Univ Technol, Dept Mat Sci, PL-35959 Rzeszow, Poland
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2015年 / 60卷 / 02期
关键词：
Aluminum alloy; Hot deformation; Microstructural evolution; Activation energy; INTERMETALLIC PHASES; PRECIPITATION; SI;
D O I：
10.1515/amm-2015-0263
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The hot deformation behavior of the 6xxx aluminum alloys was investigated by compression tests in the temperature range 100 degrees C-375 degrees C and strain rate range 10(-4)s(-1) and 4x10(-4)s(-1) using dilatometer DIL 805 BAHR Thermoanalyse equipped with accessory attachment deformation allows the process to execute thermo-plastic in vacuum and inert gas atmosphere. Associated microstructural changes of characteristic states of examined alloys were studied by using the transmission electron microscope (TEM). The results show that the stress level decreases with increasing deformation temperature and deformation rate. And was also found that the activation energy Q strongly depends on both, the temperature and rate of deformation. The results of TEM observation showing that the dynamic flow softening is mainly as the result of dynamic recovery and recrystallization of 6xxx aluminium alloys.
引用
收藏
页码：1079 / 1084
页数：6
相关论文
共 50 条
  • [41] Design and experimental study of phase composition and structure of aluminum alloys of series 6XXX
    Bryantsev, P. Yu.
    METAL SCIENCE AND HEAT TREATMENT, 2012, 54 (3-4) : 171 - 174
  • [42] Quasi-peritectic solidification reactions in 6xxx series wrought Al alloys
    Sha, G
    O'Reilly, KAQ
    Cantor, B
    Titchmarsh, JM
    Hamerton, RG
    ACTA MATERIALIA, 2003, 51 (07) : 1883 - 1897
  • [43] Dispersoid evolution during homogenization of 6xxx alloys
    Suni, JP
    Rouns, TN
    ALUMINUM ALLOYS 2002: THEIR PHYSICAL AND MECHANICAL PROPERTIES PTS 1-3, 2002, 396-4 : 687 - 692
  • [44] The effect of composition and temperature on the ageing response of some dilute 6xxx series alloys
    Aiza Jaafar, C. N.
    Lorimer, G. W.
    Parson, N. C.
    ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY, 2006, 519-521 : 227 - 232
  • [45] Mechanical behaviour at high temperature as induced during welding of a 6xxx series aluminium alloy
    Maisonnette, D.
    Bardel, D.
    Robin, V.
    Nelias, D.
    Suery, M.
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2017, 149 : 55 - 65
  • [46] Design and experimental study of phase composition and structure of aluminum alloys of series 6XXX
    P. Yu. Bryantsev
    Metal Science and Heat Treatment, 2012, 54 : 171 - 174
  • [47] Investigation of Quench Sensitivity in 6xxx Aluminum Alloys
    Lalpoor, M.
    Vossen, T.
    Xhonneux, M.
    Schlegel, A.
    THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 796 - 801
  • [48] Study of the crack sensitivity of 6xxx and 7xxx aluminum alloys
    Nagaumi, H
    Takateru, U
    THERMEC'2003, PTS 1-5, 2003, 426-4 : 465 - 470
  • [49] Thermomechanical numerical analysis of hot cracking during laser welding of 6XXX aluminum alloys
    Wei, Haoyan
    Chen, J. S.
    Wang, Hui-Ping
    Carlson, Blair E.
    JOURNAL OF LASER APPLICATIONS, 2016, 28 (02)
  • [50] EFFECT OF GRAIN REFINER AMOUNT ON THE HOT TEARING OF 6XXX ALLOYS DURING DC CASTING
    Chandia, Muhammad Umar Farooq
    Hakonsen, Arild
    Hafsas, John Erik
    LIGHT METALS 2012, 2012, : 963 - 966
12345