HOT DEFORMATION OF 6XXX SERIES ALUMINIUM ALLOYS

被引：10
|
作者：
Mrowka-Nowotnik, G. [1 ]
Sieniawski, J. [1 ]
Kotowski, S. [1 ]
Nowotnik, A. [1 ]
Motyka, M. [1 ]
机构：
[1] Rzeszow Univ Technol, Dept Mat Sci, PL-35959 Rzeszow, Poland
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2015年 / 60卷 / 02期
关键词：
Aluminum alloy; Hot deformation; Microstructural evolution; Activation energy; INTERMETALLIC PHASES; PRECIPITATION; SI;
D O I：
10.1515/amm-2015-0263
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The hot deformation behavior of the 6xxx aluminum alloys was investigated by compression tests in the temperature range 100 degrees C-375 degrees C and strain rate range 10(-4)s(-1) and 4x10(-4)s(-1) using dilatometer DIL 805 BAHR Thermoanalyse equipped with accessory attachment deformation allows the process to execute thermo-plastic in vacuum and inert gas atmosphere. Associated microstructural changes of characteristic states of examined alloys were studied by using the transmission electron microscope (TEM). The results show that the stress level decreases with increasing deformation temperature and deformation rate. And was also found that the activation energy Q strongly depends on both, the temperature and rate of deformation. The results of TEM observation showing that the dynamic flow softening is mainly as the result of dynamic recovery and recrystallization of 6xxx aluminium alloys.
引用
收藏
页码：1079 / 1084
页数：6
相关论文
共 50 条
  • [21] A Study of Effect of Micro-alloying of Tin on Ageing Behaviour of 6xxx Series Aluminium Alloys
    Baruah, Monoj
    Ladha, Anjali
    Baruah, Manish
    Kar, Arnav
    Deb, Agradeep
    Borah, Anil
    ADVANCES IN MECHANICAL ENGINEERING, ICRIDME 2018, 2020, : 397 - 405
  • [22] FORMING LIMIT STUDIES ON DIFFERENT THICKNESS ALUMINIUM 6XXX SERIES ALLOYS USED IN AUTOMOTIVE APPLICATIONS
    Bhattacharya, R.
    Stanton, M.
    Dargue, I.
    Williams, G.
    Aylmore, R.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2010, 3 : 267 - 270
  • [23] Superplastic 6xxx aluminum alloys
    不详
    ADVANCED ENGINEERING MATERIALS, 2000, 2 (03) : 78 - +
  • [24] Effect of pre-stretching on the mechanical behaviour of three artificially aged 6xxx series aluminium alloys
    Granum, Henrik
    Myhr, Ole Runar
    Borvik, Tore
    Hopperstad, Odd Sture
    MATERIALS TODAY COMMUNICATIONS, 2021, 27 (27):
  • [25] NATURAL AND ARTIFICIAL AGING OF THE 6XXX SERIES EXTRUSION ALLOYS.
    Franz, Edmund C.
    Light Metal Age, 1985, 43 (11-12): : 14 - 15
  • [26] Non-equilibrium reactions in 6xxx series Al alloys
    Hsu, C
    O'Reilly, KAQ
    Cantor, B
    Hamerton, R
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 304 (1-2): : 119 - 124
  • [27] Electron backscatter diffraction analysis of microstructural evolution in hot-deformed 6xxx series aluminum alloys
    William H. van Geertruyden
    Steven R. Claves
    Wojciech Z. Misiolek
    Metallurgical and Materials Transactions A, 2002, 33 : 693 - 700
  • [28] Electron backscatter diffraction analysis of microstructural evolution in hot-deformed 6xxx series aluminum alloys
    Van Geertruyden, WH
    Claves, SR
    Misiolek, WZ
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (03): : 693 - 700
  • [29] Development of a plane strain tensile test to characterize the formability of 5xxx and 6xxx aluminium alloys
    Gille, Maryse
    Mas, Fanny
    Ehrstrom, Jean-Christophe
    Daniel, Dominique
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2024, 17 (01)
  • [30] Development of a plane strain tensile test to characterize the formability of 5xxx and 6xxx aluminium alloys
    Maryse Gille
    Fanny Mas
    Jean-Christophe Ehrström
    Dominique Daniel
    International Journal of Material Forming, 2024, 17
12345