HOT DEFORMATION OF 6XXX SERIES ALUMINIUM ALLOYS

被引：10
|
作者：
Mrowka-Nowotnik, G. [1 ]
Sieniawski, J. [1 ]
Kotowski, S. [1 ]
Nowotnik, A. [1 ]
Motyka, M. [1 ]
机构：
[1] Rzeszow Univ Technol, Dept Mat Sci, PL-35959 Rzeszow, Poland
来源：
ARCHIVES OF METALLURGY AND MATERIALS | 2015年 / 60卷 / 02期
关键词：
Aluminum alloy; Hot deformation; Microstructural evolution; Activation energy; INTERMETALLIC PHASES; PRECIPITATION; SI;
D O I：
10.1515/amm-2015-0263
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The hot deformation behavior of the 6xxx aluminum alloys was investigated by compression tests in the temperature range 100 degrees C-375 degrees C and strain rate range 10(-4)s(-1) and 4x10(-4)s(-1) using dilatometer DIL 805 BAHR Thermoanalyse equipped with accessory attachment deformation allows the process to execute thermo-plastic in vacuum and inert gas atmosphere. Associated microstructural changes of characteristic states of examined alloys were studied by using the transmission electron microscope (TEM). The results show that the stress level decreases with increasing deformation temperature and deformation rate. And was also found that the activation energy Q strongly depends on both, the temperature and rate of deformation. The results of TEM observation showing that the dynamic flow softening is mainly as the result of dynamic recovery and recrystallization of 6xxx aluminium alloys.
引用
收藏
页码：1079 / 1084
页数：6
相关论文
共 50 条
  • [31] The localized corrosion of Al 6XXX alloys
    Shaw, BA
    McCosby, MM
    Abdullah, AM
    Pickering, HW
    JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 2001, 53 (07): : 42 - 46
  • [32] THERMODYNAMIC ANALYSIS OF 6XXX SERIES AL ALLOYS: PHASE FRACTION DIAGRAMS
    Cui, S.
    Mishra, R.
    Jung, I. -H.
    JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2018, 54 (01) : 119 - 131
  • [33] General aspects related to the corrosion of 6xxx series aluminium alloys: Exploring the influence of Mg/Si ratio and Cu
    Liang, W. J.
    Rometsch, P. A.
    Cao, L. F.
    Birbilis, N.
    CORROSION SCIENCE, 2013, 76 : 119 - 128
  • [34] Preparation of High-Quality 6xxx Aluminium Eco Alloys Cast in Billets
    Boczkal, Sonia
    Augustyn, Boguslaw
    Hrabia-Wisnios, Joanna
    Kapinos, Dawid
    Lewis, Gregory
    Bareel, Pierre-Francois
    Savelli, Stephane
    da Silva, Manel
    Ozen, Tutku
    15TH INTERNATIONAL ALUMINIUM CONFERENCE, INALCO 2023, 2023,
  • [35] The localized corrosion of Al 6XXX alloys
    B. A. Shaw
    M. M. McCosby
    A. M. Abdullah
    H. W. Pickering
    JOM, 2001, 53 : 42 - 46
  • [36] Robotic welding of thin wall components made of 6xxx and 2xxx series aluminium alloys using low-energy methods
    Department of Welding Technology, Welding Institute, Gliwice, Poland
    Weld. Int., 5 (333-338):
  • [37] Pin-on-disc characterization of 2xxx and 6xxx aluminium alloys aged by precipitation age hardening
    Meyveci, Ahmet
    Karacan, Ismail
    Caligulu, Ugur
    Durmus, Huelya
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 491 (1-2) : 278 - 283
  • [38] Exploring the electrochemistry of 6xxx series aluminium alloys as a function of Si to Mg ratio, Cu content, ageing conditions and microstructure
    Kairy, S. K.
    Rometsch, P. A.
    Diao, K.
    Nie, J. F.
    Davies, C. H. J.
    Birbilis, N.
    ELECTROCHIMICA ACTA, 2016, 190 : 92 - 103
  • [39] The influence of Mg/Si ratio and Cu content on the stretch formability of 6xxx aluminium alloys
    Zhong, Hao
    Rometsch, Paul A.
    Cao, Lingfei
    Estrin, Yuri
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 651 : 688 - 697
  • [40] Characterization and micromechanical modelling of microstructural heterogeneity effects on ductile fracture of 6xxx aluminium alloys
    Hannard, F.
    Pardoen, T.
    Maire, E.
    Le Bourlot, C.
    Mokso, R.
    Simar, A.
    ACTA MATERIALIA, 2016, 103 : 558 - 572
12345