Fabrication of an X-Ray Mirror Used in a Soft X-Ray Microscope

被引：0
|
作者：
Chon, K. S. [1 ]
Namba, Y. [2 ]
Yoon, K. H. [1 ,3 ]
机构：
[1] Wonkwang Univ, Inst Radiol Imaging Sci, 334-2 Sinyong Dong, Iksan 570749, Jeonbuk, South Korea
[2] Chubu Univ, Dept Mech Engn, Kasugai, Aichi, Japan
[3] Wonkwang Univ, Inst Radiolog Imaging Sci, Dept Radiol, Iksan, South Korea
来源：
WORLD CONGRESS ON MEDICAL PHYSICS AND BIOMEDICAL ENGINEERING 2006, VOL 14, PTS 1-6 | 2007年 / 14卷
基金：
日本学术振兴会;
关键词：
Soft X-ray microscope; X-ray optics; X-ray mirror fabrication; Replication method;
D O I：
暂无
中图分类号：
R318 [生物医学工程];
学科分类号：
0831 ;
摘要：
Reflective X-ray optics used in a soft X-ray microscope require a super-smooth surface and highly accurate figure. We considered a Wolter type I mirror as a condenser optic. The mirror of 1/4 X magnification was optimized for observing living cells at a wavelength of 2.3 nm in a laboratory prototype. The mirror was fabricated by an epoxy replication technique. The surface roughness and figure error of the replicated gold mirror were 1.2 nm rms and 160 nm PV, respectively. The replicated gold mirror copied the original master mandrel very well. Several mirrors could be successfully made from one master mandrel.
引用
收藏
页码：1644 / +
页数：3
相关论文
共 50 条
  • [1] Fabrication of a soft x-ray microscope mirror using an epoxy replication method
    Chon, Kwon Su
    Namba, Yoshiharu
    Kim, Kyong-Woo
    Kang, Sunghoon
    Yoon, Kwon-Ha
    [J]. OPTICAL ENGINEERING, 2008, 47 (01)
  • [2] X-RAY MICROSCOPE MIRROR SYSTEMS
    BAEZ, AV
    WEISSBLUTH, M
    [J]. PHYSICAL REVIEW, 1954, 93 (04): : 942 - 942
  • [3] Fabrication of X-ray mirror for hard X-ray diffraction limited nanofocusing
    Yumoto, Hirokatsu
    Mimura, Hidekazu
    Matsuyama, Satoshi
    Handa, Soichiro
    Shibatani, Akihiko
    Katagishi, Keiko
    Yamamura, Kazuya
    Sano, Yasuhisa
    Endo, Katsuyoshi
    Mori, Yuzo
    Yabashi, Makina
    Nishino, Yoshinori
    Tamasaku, Kenji
    Ishikawa, Tetsuya
    Yamauchi, Kazuto
    [J]. SYNCHROTRON RADIATION INSTRUMENTATION, PTS 1 AND 2, 2007, 879 : 967 - +
  • [4] Fabrication of a precise ellipsoidal mirror for soft X-ray nanofocusing
    Mimura, Hidekazu
    Takei, Yoshinori
    Kume, Takehiro
    Takeo, Yoko
    Motoyama, Hiroto
    Egawa, Satoru
    Matsuzawa, Yusuke
    Yamaguchi, Gota
    Senba, Yasunori
    Kishimoto, Hikaru
    Ohashi, Haruhiko
    [J]. REVIEW OF SCIENTIFIC INSTRUMENTS, 2018, 89 (09):
  • [5] Fabrication of aspherical mirror for soft x-ray optics system
    Abraha, P
    Inamura, T
    Hara, T
    Sata, T
    [J]. CURRENT DEVELOPMENTS IN OPTICAL DESIGN AND ENGINEERING VII, 1998, 3429 : 56 - 61
  • [6] X-ray scattering microscope with a Wolter mirror
    Takano, H
    Aoki, S
    Kumegawa, M
    Watanabe, N
    Ohhigashi, T
    Aota, T
    Yamamoto, K
    Yokosuka, H
    Tanoue, R
    Tsujita, Y
    Ando, M
    [J]. REVIEW OF SCIENTIFIC INSTRUMENTS, 2002, 73 (07): : 2629 - 2633
  • [7] Optimization of a Wolter type I mirror for a soft X-ray microscope
    Chon, KS
    Namba, Y
    Yoon, KH
    [J]. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2006, 30 (02): : 223 - 230
  • [8] AN X-RAY MICROSCOPE WITH A PLASMA X-RAY SOURCE
    NIEMANN, B
    RUDOLPH, D
    SCHMAHL, G
    DIEHL, M
    THIEME, J
    MEYERILSE, W
    NEFF, W
    HOLZ, R
    LEBERT, R
    RICHTER, F
    HERZIGER, G
    [J]. OPTIK, 1990, 84 (01): : 35 - 36
  • [9] Soft X-ray imaging of living cells in water: flash contact soft X-ray microscope
    Majima, T
    [J]. TRAC-TRENDS IN ANALYTICAL CHEMISTRY, 2004, 23 (07) : 520 - 525
  • [10] THE ATTAINABLE LIMITS IN X-RAY MIRROR FABRICATION
    LINDSEY, K
    [J]. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 1984, 221 (01): : 14 - 19
12345