Reliability study on thermal cycling of QFP device solder joints based on morphological optimisation

被引：0
|
作者：
Liu, Kunpeng [1 ]
Zhang, Wei [1 ]
Qu, Chen [2 ]
Xiang, Gang [2 ]
Wang, Shang [1 ]
Tian, Yanhong [1 ]
机构：
[1] Harbin Inst Technol, State Key Lab Precis Welding & Joining Mat & Stru, Harbin, Peoples R China
[2] Beijing Aerosp Automat Control Inst, Natl Key Lab Aerosp Intelligent Control, Beijing, Peoples R China
来源：
2024 25TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, ICEPT | 2024年
基金：
中国国家自然科学基金;
关键词：
surface evolver; finite element simulation; solder joint; fatigue life; BEHAVIOR;
D O I：
10.1109/ICEPT63120.2024.10668678
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
As a research method with low cost and high accuracy, finite element simulation is widely used in various fields. However, there are still some difficulties in obtaining accurate initial model in some researches. In this paper, Surface Evolver software is used to calculate the initial solder joint model of QFP device by energy minimization principle, and the model is tested experimentally. Then, the solder joint model was imported into the finite element software to establish the QFP device model, and the thermal cycle simulation test at -55-150 degrees C was carried out to obtain the mechanical properties of the solder joint Finally, the fatigue life prediction model is used to calculate the life of solder joints.
引用
收藏
页数：4
相关论文
共 50 条
  • [31] Effects of Thermal Cycling on Creep of SnAgCu Solder Joints
    Alghoul, T.
    Wentlent, L.
    Sivasubramony, R.
    Greene, C.
    Thompson, P.
    Borgesen, P.
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 2019, 9 (05): : 888 - 894
  • [32] A Study on microstructure of tin-lead solder joints under thermal cycling
    Li, Qi-hai
    Chen, Wei-wei
    Li, Weiming
    2016 17TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2016, : 856 - 859
  • [33] A STUDY OF THE DIMENSIONAL STABILITY OF SI/BECU SOLDER JOINTS AS A RESULT OF THERMAL CYCLING
    YEH, XL
    HARRIOTT, LR
    PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1991, 13 (03): : 170 - 176
  • [34] A study on the thermal fatigue behavior of solder joints under power cycling conditions
    Yang, Se Young
    Kim, Ilho
    Lee, Soon-Bok
    IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2008, 31 (01): : 3 - 12
  • [35] Reliability Study of the Solder Joints in CCGA Package during Thermal Test
    Lv, Xiaorui
    Huang, Yingzhuo
    Lin, Pengrong
    Jiang, Xueming
    Lian, Binhao
    Yao, Quanbin
    2014 15TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2014, : 854 - 857
  • [36] Investigation on bridge in QFP and fatigue in EGA based on simulating - Solder joints formation
    Zhao, XJ
    Wang, CQ
    Zhang, L
    Yin, CY
    Yang, SQ
    INTELLIGENT SYSTEMS IN DESIGN AND MANUFACTURING III, 2000, 4192 : 222 - 227
  • [37] Reliability of lead-free solder joints with different PCB surface finishes under thermal cycling
    Xia, Yanghua
    Me, Xiaoming
    JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 454 (1-2) : 174 - 179
  • [38] The mechanical properties degradation of solder joints under thermal cycling
    Wang, Q
    Lee, SWR
    Wang, GQ
    Chen, GH
    Hung, L
    Ma, JS
    PROCEEDINGS OF INTERNATIONAL SYMPOSIUM ON ELECTRONIC MATERIALS AND PACKAGING, 2000, : 194 - 196
  • [39] Transgranular Crack Propagation in Thermal Cycling of SnAgCu Solder Joints
    Lovberg, Andreas
    Tegehall, Per-Erik
    2019 20TH INTERNATIONAL CONFERENCE ON THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICROELECTRONICS AND MICROSYSTEMS (EUROSIME), 2019,
  • [40] Thermal Cycling of Temperature and Strain Rate Dependent Solder Joints
    Skipor A.F.
    Harren S.V.
    Mechanics of Time-Dependent Materials, 1998, 2 (1) : 59 - 83
12345