Study of the effects of slurry acid radical on the corrosive-abrasive characteristics of high chromium cast iron

被引:0
|
作者
Rao, Qichang [1 ]
Gao, Yimin [1 ]
Liu, Fuling [1 ]
Zhang, Jinzhu [1 ]
机构
[1] Xi'an Jiaotong Univ, Xi'an, China
关键词
Acid resistance - Corrosive effects - Iron alloys - Wear resistance;
D O I
暂无
中图分类号
学科分类号
摘要
The effects of five kinds of inorganic acid, namely, phosphoric acid, sulphuric acid, nitric acid, hydrochloric acid and hydrofluoric acid(pH value was from 3 to 4, acid density was 0.1 N and 1N) on the corrosive-abrasive characteristics of high chromium cast iron were studied. The results show that variable acid radical had an important influence on the corrosive-abrasive characteristics of high chromium cast iron under the same slurry condition. The influence degree of slurry acid radical was in the sequence of HCl(HF)&rarrH2SO4(HNO3)&rarrH3PO4 according to the corrosive-abrasive rate from high to low. The increase of acid radical density had no influence on the sequence, but the corrosive-abrasive rate increased with the increase of acid density. As acid density was high than 0.1N the corrosive-abrasive rate higher than that of stainless steel. The influence of acid radical on the corrosive-abrasive rate was closely related to the influence of acid radical on the corrosive rate of high chromium cast iron.
引用
收藏
页码:15 / 18
相关论文
共 50 条
  • [31] The particle size effect on abrasive wear of high-chromium white cast iron mill balls
    Pintaude, G
    Tschiptschin, AP
    Tanaka, DK
    Sinatora, A
    WEAR, 2001, 250 : 66 - 70
  • [32] Solidification microstructure of hypereutectic high chromium cast iron semi-solid slurry in centrifugal casting
    Xi'an Jiaotong University, Xi'an 710049, China
    不详
    Tezhong Zhuzao Ji Youse Hejin, 2006, 8 (489-491):
  • [33] Corrosion Tests for High Chromium Cast Iron Using Galvanostatic Polarization Technique in a Simulating Slurry Solution
    Baasanjav, Ochgerel
    Lee, Jun-Seob
    Lee, Ye-Jin
    Oh, Jun-Seok
    Lee, Je-hyun
    CORROSION SCIENCE AND TECHNOLOGY-KOREA, 2023, 22 (04): : 252 - 256
  • [34] Fabrication and abrasive wear property of high chromium cast iron with high vanadium and high nitrogen content (HCCI-VN)
    Xu, Liujie
    Wang, Fangfang
    Li, Ming
    Li, Fengjun
    Wang, Xiaodong
    Jiang, Tao
    Deng, Xiangtao
    Wei, Shizhong
    WEAR, 2023, 523
  • [35] Effect of boron addition on three-body abrasive wear characteristics of high chromium based multi-component white cast iron
    Purba, Riki Hendra
    Shimizu, Kazumichi
    Kusumoto, Kenta
    Gaqi, Yila
    Todaka, Takayuki
    MATERIALS CHEMISTRY AND PHYSICS, 2022, 275
  • [36] Microstructure and erosion wear properties of high chromium cast iron added nitrogen by high pressure in alkaline sand slurry
    Xu, Liujie
    Wang, Fangfang
    Lu, Fugang
    Zhou, Yucheng
    Chen, Chong
    Wei, Shizhong
    WEAR, 2021, 476 (476)
  • [37] Study of the Erosive-abrasive Wear Resistance of Fe-14%Cr-2.8%C High Chromium Cast Iron
    Franco Junior, Adonias Ribeiro
    Caceres, Jaime Alberto Sanchez
    da Rocha, Diego Loubach
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2024, 27 : 1 - 5
  • [38] Effects of tungsten on the microstructure and on the abrasive wear behavior of a high-chromium white iron
    Cortes-Carrillo, E.
    Bedolla-Jacuinde, A.
    Mejia, I.
    Zepeda, C. M.
    Zuno-Silva, J.
    Guerra-Lopez, F. V.
    WEAR, 2017, 376 : 77 - 85
  • [39] Effects of Si on the Microstructures and Mechanical Properties of High-Chromium Cast Iron
    Lai, J. P.
    Pan, Q. L.
    Peng, H. J.
    Cui, H. R.
    Xiao, C. A.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2016, 25 (11) : 4617 - 4623
  • [40] Effects of Destabilization Temperature on the Microstructure and Mechanical Properties of High Chromium Cast Iron
    Lai, J. P.
    Pan, Q. L.
    Wang, Z. B.
    Cui, H. R.
    Wang, X. D.
    Gao, Z. Z.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (10) : 4667 - 4675