Effects of sintering on properties of TiB2/Cu composite

被引：0
|
作者：
Dong, Shijie [1 ]
Shi, Yaowu [1 ]
Lei, Yongping [1 ]
机构：
[1] Xi'an Jiaotong Univ, Xi'an, China
来源：
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University | 2000年 / 34卷 / 07期
关键词：
Composite materials - Hardness - Pressure - Sintering - Temperature;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The sintering technology was applied in order to analyze the properties of TiB2/Cu composite. The results show that the preferred sintering technology is when the relevant parameters are temperature of 1163 K and sintering pressure of 50 MPa with the holding temperature and pressure time of 2.5 hours. The hardness of TiB2/Cu composite is increased while the conductivity is reduced with the increase of TiB2 content. The softening temperature is about 1173 K.
引用
收藏
页码：73 / 76
相关论文
共 50 条
  • [11] Synthesis and sintering of TiB2 and TiB2-TiC composite under high pressure
    Bhaumik, SK
    Divakar, C
    Singh, AK
    Upadhyaya, GS
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 279 (1-2): : 275 - 281
  • [12] Mechanical properties and microstructure of Al/(TiC + TiB2) composite fabricated by spark plasma sintering
    Hadian, M.
    Shahrajabian, H.
    Rafiei, M.
    CERAMICS INTERNATIONAL, 2019, 45 (09) : 12088 - 12092
  • [13] Effects of TiB2 Particles on the Microstructure Evolution and Mechanical Properties of B4C/TiB2 Ceramic Composite
    Niu, Haiyan
    Zhu, Yu
    You, Ning
    Wang, Yangwei
    Cheng, Huanwu
    Luo, Dujun
    Tang, Mengying
    Zhang, Jiamin
    MATERIALS, 2021, 14 (18)
  • [14] The Influence of TiB2 Particles on the Artificial Aging Behavior of TiB2/Al-5Cu Composite
    Jia, Yiwang
    Liu, Zhengcai
    Liu, Qibin
    Shang, Xiaojuan
    YunChe
    Men, Sanquan
    Li, Xiang
    Zhang, Renguo
    Li, Yongxiang
    INTERNATIONAL JOURNAL OF METALCASTING, 2025, 19 (02) : 828 - 842
  • [15] Reactive sintering and properties of TiB2 and TiC porous cermets
    Akhtar, Farid
    Hasan, Faizul
    MATERIALS LETTERS, 2008, 62 (8-9) : 1242 - 1245
  • [16] SINTERING AND PROPERTIES OF TIB2 HARDMETALS WITH BINDERS BASED ON IRON
    JUNGLING, T
    POWDER METALLURGY, 1994, 37 (03) : 180 - 181
  • [17] Preparation and properties of TiB2 particles reinforced Cu-Cr matrix composite
    Zhang, Pengchao
    Jie, Jinchuan
    Gao, Yuan
    Li, Hang
    Cao, Zhiqiang
    Wang, Tongmin
    Li, Tingju
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 642 : 398 - 405
  • [18] Microstructure and properties of TiB2 particles reinforced Cu-Cr matrix composite
    Zhang, Pengchao
    Jie, Jinchuan
    Li, Hang
    Wang, Tongmin
    Li, Tingju
    JOURNAL OF MATERIALS SCIENCE, 2015, 50 (09) : 3320 - 3328
  • [19] Synthesis and sintering of TiB2 nanoparticles
    Rabiezadeh, A.
    Hadian, A. M.
    Ataie, A.
    CERAMICS INTERNATIONAL, 2014, 40 (10) : 15775 - 15782
  • [20] Electrical aspects of the spark-plasma sintering of TiN–TiB2 composite. I. Effect of electrical parameters of spark-plasma sintering on the structure and properties of TiN–TiB2 composite
    A. S. Petukhov
    I. V. Khobta
    A. V. Ragulya
    A. V. Derevyanko
    A. M. Kovalchenko
    V. V. Starchenko
    Powder Metallurgy and Metal Ceramics, 2012, 50 : 596 - 605
12345