Effects of sintering on properties of TiB2/Cu composite

被引：0
|
作者：
Dong, Shijie [1 ]
Shi, Yaowu [1 ]
Lei, Yongping [1 ]
机构：
[1] Xi'an Jiaotong Univ, Xi'an, China
来源：
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University | 2000年 / 34卷 / 07期
关键词：
Composite materials - Hardness - Pressure - Sintering - Temperature;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The sintering technology was applied in order to analyze the properties of TiB2/Cu composite. The results show that the preferred sintering technology is when the relevant parameters are temperature of 1163 K and sintering pressure of 50 MPa with the holding temperature and pressure time of 2.5 hours. The hardness of TiB2/Cu composite is increased while the conductivity is reduced with the increase of TiB2 content. The softening temperature is about 1173 K.
引用
收藏
页码：73 / 76
相关论文
共 50 条
  • [21] Laser power bed fusion of TiB2/Cu composite: Densification, microstructure, and properties
    Wang, Siying
    Wang, Yanfang
    Ma, Wenjun
    Jiang, Yihui
    Cao, Fei
    Ma, Chengyu
    Liang, Shuhua
    MATERIALS CHARACTERIZATION, 2025, 222
  • [22] Structural heterogeneity and its effects on the properties of an in situ TiB2 -TiC/Cu composite synthesised by hot pressing
    Jiang, Yihui
    Zhang, Xiaojun
    Zhang, Xinnan
    Lan, Tao
    Cao, Fei
    Liang, Shuhua
    POWDER METALLURGY, 2020, 63 (02) : 126 - 133
  • [23] Microstructure and properties of as-cast Al-4.5Cu/TiB2 composite
    Chen, Ziyong
    Chen, Yuyong
    Shu, Qun
    Sun, Jianfei
    An, Geying
    Li, Dong
    Liu, Yuyin
    2000, (17):
  • [24] Effects of TiB2 particles on artificial aging response of high-Li-content TiB2/Al-Li-Cu composite
    Li, Xianfeng (brucelee75cn@sjtu.edu.cn), 1600, Elsevier Ltd (749):
  • [25] Effect of TiB2 on the Microstructure and Mechanical Properties of TiB2/Al-5Cu Matrix CompositesEffect of TiB2 on the Microstructure and Mechanical Properties of TiB2/Al-5Cu Matrix CompositesTang, Omar, Jiang, and Mohamed
    Jingchuan Tang
    Mohd Zaidi Omar
    Ripeng Jiang
    Intan Fadhlina Mohamed
    JOM, 2025, 77 (3) : 1064 - 1078
  • [26] THE REINFORCING MECHANISM OF TiB2 IN TiB2/A357 COMPOSITE
    B. Yu Y.J. Zhang Z.X. Zhao F.X. Zhao Q.K. Cai and C.S.Liu1) Shenyang Research Institute of Foundry
    Acta Metallurgica Sinica(English Letters), 2003, (05) : 375 - 378
  • [27] Effects of TiB2 particles on artificial aging response of high-Li-content TiB2/Al-Li-Cu composite
    Wu, Liang
    Zhou, Cong
    Li, Xianfeng
    Ma, Naiheng
    Wang, Haowei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 749 : 189 - 196
  • [28] Reinforcing mechanism of TiB2 in TiB2/A357 composite
    Yu, B.
    Zhang, Y.J.
    Zhao, Z.X.
    Zhao, F.X.
    Cai, Q.K.
    Liu, C.S.
    Acta Metallurgica Sinica (English Letters), 2003, 16 (05) : 375 - 378
  • [29] Synthesis and properties of TiN/TiB2 composite materials
    Collage of Physics, Jilin University, Changchun 130023, China
    不详
    不详
    Gaoya Wuli Xuebao, 2008, 1 (15-18):
  • [30] Effect of In-Situ TiB2 Particles on the Creep Properties of 3 Wt.% TiB2/Al-Cu-Mg-Ag Composite
    Hengwen Xia
    Mengjia Li
    Guopeng Zhang
    Hai Huang
    Yunjia Shi
    Bin Cai
    Zhongxia Liu
    Jiefang Wang
    JOM, 2022, 74 : 4121 - 4128
12345