Effects of sintering on properties of TiB2/Cu composite

被引：0
|
作者：
Dong, Shijie [1 ]
Shi, Yaowu [1 ]
Lei, Yongping [1 ]
机构：
[1] Xi'an Jiaotong Univ, Xi'an, China
来源：
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University | 2000年 / 34卷 / 07期
关键词：
Composite materials - Hardness - Pressure - Sintering - Temperature;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The sintering technology was applied in order to analyze the properties of TiB2/Cu composite. The results show that the preferred sintering technology is when the relevant parameters are temperature of 1163 K and sintering pressure of 50 MPa with the holding temperature and pressure time of 2.5 hours. The hardness of TiB2/Cu composite is increased while the conductivity is reduced with the increase of TiB2 content. The softening temperature is about 1173 K.
引用
收藏
页码：73 / 76
相关论文
共 50 条
  • [31] Effect of In-Situ TiB2 Particles on the Creep Properties of 3 Wt.% TiB2/Al-Cu-Mg-Ag Composite
    Xia, Hengwen
    Li, Mengjia
    Zhang, Guopeng
    Huang, Hai
    Shi, Yunjia
    Cai, Bin
    Liu, Zhongxia
    Wang, Jiefang
    JOM, 2022, 74 (11) : 4121 - 4128
  • [32] Effect of TiB2 on the Microstructure and Mechanical Properties of TiB2/Al-5Cu Matrix Composites
    Tang, Jingchuan
    Omar, Mohd Zaidi
    Jiang, Ripeng
    Mohamed, Intan Fadhlina
    JOM, 2025, 77 (03) : 1064 - 1078
  • [33] The Fabrication and Characterization of a TiB2/Ni Composite Using Spark Plasma Sintering
    Wang, Miao
    Wang, Wen-xian
    Zhou, Jun
    Chen, Hong-sheng
    Chang, Ze-xin
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (10) : 2349 - 2360
  • [34] Rapid synthesis of TiB2/Fe composite in situ by spark plasma sintering
    Binghong Li
    Ying Liu
    Hui Cao
    Lin He
    Jun Li
    Journal of Materials Science, 2009, 44 : 3909 - 3912
  • [35] Rapid synthesis of TiB2/Fe composite in situ by spark plasma sintering
    Li, Binghong
    Liu, Ying
    Cao, Hui
    He, Lin
    Li, Jun
    JOURNAL OF MATERIALS SCIENCE, 2009, 44 (14) : 3909 - 3912
  • [36] The Fabrication and Characterization of a TiB2/Ni Composite Using Spark Plasma Sintering
    Miao Wang
    Wen-xian Wang
    Jun Zhou
    Hong-sheng Chen
    Ze-xin Chang
    Transactions of the Indian Institute of Metals, 2018, 71 : 2349 - 2360
  • [37] Mechanical properties and microstructure of in situ TiB2/Cu composite fabricated by reactive hot pressing
    Wang Guisong
    Jiang Yanqing
    Zhang Lide
    RARE METALS, 2007, 26 : 322 - 325
  • [38] SINTERING PROPERTIES OF TiB2 SYNTHESIZED FROM CARBON COATED PRECURSORS
    Fu, Zhezhen
    Koc, Rasit
    MECHANICAL PROPERTIES AND PERFORMANCE OF ENGINEERING CERAMICS AND COMPOSITES XI, 2017, 37 (02): : 171 - 182
  • [39] Effects of TiB2 Particle and Short Fiber Sizes on the Microstructure and Properties of TiB2-Reinforced Composite Coatings
    Lin, Yinghua
    Yao, Jianhua
    Wang, Liang
    Zhang, Qunli
    Li, Xueqiao
    Lei, Yongping
    Fu, Hanguang
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (04) : 1876 - 1889
  • [40] Effects of TiB2 Particle and Short Fiber Sizes on the Microstructure and Properties of TiB2-Reinforced Composite Coatings
    Yinghua Lin
    Jianhua Yao
    Liang Wang
    Qunli Zhang
    Xueqiao Li
    Yongping Lei
    Hanguang Fu
    Journal of Materials Engineering and Performance, 2018, 27 : 1876 - 1889
12345