FRICTIONAL CHARACTERISTICS OF TEFLON-STEEL INTERFACES UNDER DYNAMIC CONDITIONS.

被引：0

作者：

Constantinou, M.C. ^{[1
]}

Caccese, John ^{[1
]}

Harris, Harry G. ^{[1
]}

机构：

[1] Drexel Univ, Philadelphia, PA, USA, Drexel Univ, Philadelphia, PA, USA

来源：

Earthquake Engineering & Structural Dynamics | 1987年 / l5卷 / 06期

关键词：

DYNAMICS - Testing - FRICTION - Measurements - PLASTICS - STAINLESS STEEL - STRUCTURAL DESIGN - Testing;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

An experimental study to assess the frictional characteristics of Teflon-steel interfaces under dynamic conditions is described. Tests were conducted on unfilled Teflon sliding on stainless steel polished to a surface roughness of less than 0. 05 mu m CLA. The bearing pressure was 1. 38, 3. 45 and 6. 9 N/mm**2, the frequency of sliding was 0. 5 and 1 Hz and the acceleration of excitation, imposed by a small shaking table, was between 0. 05 and 0. 5 g. It was found that friction drops with decreases in the acceleration of excitation and drops with increases in the bearing pressure. It was observed that Teflon-steel interfaces have the tendency to slide continuously regardless of the value of acceleration. This is very important in base isolation applications because it prevents high frequency input to the structure.

引用

共 50 条

[21] Release of flavor from emulsions under dynamic sampling conditions.
Linforth, RST
Taylor, AJ
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2003, 226 : U78 - U78
[22] CHARACTERISTICS OF RESPONSE OF CARBURETTED SI ENGINE UNDER TRANSIENT CONDITIONS.
Hohsho, Yukio
Kanno, Kokichi
Nakai, Hiroyuki
Kadota, Toshikazu
Bulletin of the JSME, 1985, 28 (242): : 1725 - 1732
[23] Frictional characteristics of ceramics under water-lubricated conditions
Wong, HC
Umehara, N
Kato, K
TRIBOLOGY LETTERS, 1998, 5 (04) : 303 - 308
[24] Metallographic Aspects of an AISI 316 Stainless Steel Under Fatigue Conditions.
Pacheco, David Juvenal
Sousa e Silva, Antonio Sergio
Alcoforado Rebello, Joao Marcos
Monteiro, Sergio Neves
1978, 34 (246): : 327 - 332
[25] Diffusion Chromo-Aluminizing of Steel under Variable Temperature Conditions.
Przybylowicz, Karol
Becla-Gluc, Alicja
Hutnik Warszawa, 1980, 47 (02): : 69 - 75
[26] Friction of Rigid PVC Compounds on Steel Surfaces Under Extrusion Conditions.
Knappe, W.
Krumboeck, E.
Kautschuk und Gummi, Kunststoffe, 1985, 38 (11): : 1004 - 1009
[27] Friction and Wear of a Precipitation Hardenable Austenitic Steel under Abrasive Conditions.
Zum Gahr, Karl Heinz
Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 1977, 68 (05): : 381 - 389
[28] DEPENDENCE OF DYNAMIC SPINDLE ASSEMBLY CHARACTERISTICS UPON MACHINE OPERATING CONDITIONS.
Shibanov, E.I.
Machines & Tooling (English translation of Stanki i Instrument), 1975, 46 (09): : 6 - 10
[29] ON THE CORROSION CHARACTERISTICS OF SOME MODIFIED ALUMINIUM ALLOYS IN SEAWATER WITH DIFFERENT PRETREATMENTS UNDER DYNAMIC AND NEARLY STATIC CONDITIONS.
Vankateswaran, G.
Venkateswarlu, K.S.
Galow, E.
Key Engineering Materials, 1987, 20-28 (pt 1-4)
[30] THERMAL STATE OF A SHUT-OFF VALVE UNDER DYNAMIC CONDITIONS.
Tkhorzhevskaya, N.S.
Burov, V.V.
Nikitin, V.V.
Chemical and Petroleum Engineering, 1986, 22 (7-8) : 377 - 378

← 1 2 3 4 5 →