Temperature stable SAW devices using directly bonded LiTaO3/glass substrates

被引：0
|
作者：
Sato, H. [1 ]
Onishi, K. [1 ]
Shimamura, T. [1 ]
Tomita, Y. [1 ]
机构：
[1] Matsushita Electric Industrial Co, Ltd, Osaka, Japan
来源：
Proceedings of the IEEE Ultrasonics Symposium | 1998年 / 1卷
关键词：
Bonding - Glass - Lithium compounds - Piezoelectric materials - Single crystals - Thermal expansion - Thermal stress - Thermodynamic stability - Ultrasonic transmission - Ultrasonic velocity;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Temperature-stable surface acoustic wave (SAW) devices were fabricated using a stacking procedure based on the direct bonding of a piezoelectric single crystal LiTaO3 layer on a glass substrates. The piezoelectric layer experienced thermal stress due to the smaller thermal expansion coefficient (TEC) of the glass substrate. By using a glass substrate with small TEC and minimizing the LiTaO3/glass thickness ratio, the temperature coefficient of frequency of the SAW devices was maintained at approximately -6 ppm/°C from -30 °C to 80 °C.
引用
收藏
页码：335 / 338
相关论文
共 50 条
  • [41] Ozone sensors based on layered SAW devices with:: InOx/SiNx/36° YX LiTaO3 structure
    Fechete, Alexandru C.
    Wlodarski, Wojtek B.
    Kalantar-zadeh, Kourosh
    Holland, Anthony S.
    Wisistsora-at, Anurat
    TENCON 2005 - 2005 IEEE REGION 10 CONFERENCE, VOLS 1-5, 2006, : 1962 - +
  • [42] LITAO3 SINGLE-CRYSTAL FOR SAW DEVICES APPLICATIONS .2. CRYSTAL-GROWTH
    FUKUDA, T
    MATSUMURA, S
    HIRANO, H
    TAKAHASHI, S
    FERROELECTRICS, 1978, 19 (3-4) : 167 - 167
  • [43] Standardized evaluation of chemical compositions of LiTaO3 single crystals for SAW devices using the LFB ultrasonic material characterization system
    Kushibiki, J
    Ohashi, Y
    Ujiie, T
    IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 2002, 49 (04) : 454 - 465
  • [44] Temperature compensated LiTaO3/Sapphire bonded SAW substrate with low loss and high coupling factor suitable for US-PCS application
    Miura, M
    Matsuda, T
    Satoh, Y
    Ueda, M
    Ikata, O
    Ebata, Y
    Takagi, H
    2004 IEEE ULTRASONICS SYMPOSIUM, VOLS 1-3, 2004, : 1322 - 1325
  • [45] High temperature stable super high electromechanical coupling saw substrates and application for saw devices
    Yamanouchi, K
    Ishii, T
    PROCEEDINGS OF THE 2002 IEEE INTERNATIONAL FREQUENCY CONTROL SYMPOSIUM & PDA EXHIBITION, 2002, : 66 - 69
  • [46] High-Performance Acoustic Wave Devices on LiTaO3/SiC Hetero-Substrates
    Zhang, Liping
    Zhang, Shibin
    Wu, Jinbo
    Zheng, Pengcheng
    Zhou, Hongyan
    Yao, Hulin
    Li, Zhongxu
    Huang, Kai
    Sun, Huarui
    Ou, Xin
    IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 2023, 71 (10) : 4182 - 4192
  • [47] Bandwidth-tunable Filter Consisting of SAW Resonators and BaSrTiO3 Varactors Directly Fabricated on a LiTaO3 Wafer
    Kimura, Tetsuya
    Kobayashi, Hideaki
    Kishimoto, Yutaka
    Kato, Hideyuki
    Inaba, Masahiro
    Hashimoto, Ken-ya
    Matsumura, Takeshi
    Hirano, Hideki
    Kadota, Michio
    Esashi, Masayoshi
    Tanaka, Shuji
    2014 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS), 2014, : 795 - 798
  • [48] GROWTH OF LITAO3 SINGLE-CRYSTAL FOR SAW DEVICE APPLICATIONS
    FUKUDA, T
    MATSUMURA, S
    HIRANO, H
    ITO, T
    JOURNAL OF CRYSTAL GROWTH, 1979, 46 (02) : 179 - 184
  • [49] Numerical calculation of SAW sensitivity:: application to ZnO/LiTaO3 transducers
    Powell, DA
    Kalantar-zadeh, K
    Wlodarski, W
    SENSORS AND ACTUATORS A-PHYSICAL, 2004, 115 (2-3) : 456 - 461
  • [50] Very Large Bandwidth IF SAW Filters Using Leaky Waves on LiNbO3 and LiTaO3
    El Hakiki, M.
    Damy, J-A.
    Hartmann, H.
    Brice, J-M.
    Perois, X.
    2011 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS), 2011, : 1325 - 1328
12345