Fabrication of 3D Nextel™ 720/Mullite at low temperature

被引：0
|
作者：
Zhang, Fu-Ping [1 ]
Chen, Zhao-Feng [1 ]
Zhang, Li-Tong [1 ]
Cheng, Lai-Fei [1 ]
Xu, Yong-Dong [1 ]
机构：
[1] State Key Lab. Solidification Proc., NW Polytechnical University, Xi'an 710072, China
来源：
Hangkong Cailiao Xuebao/Journal of Aeronautical Materials | 2002年 / 22卷 / 02期
关键词：
Fracture toughness - Infiltration - Pyrolysis - Strength of materials;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
3D Nextel™ 720/Mullite composites were fabricated by precursor infiltration pyrolysis method. Influence of the matrix component control, the dense of composite and the treating temperature on the fracture strength of composites was studied. The results indicted that the dense composite were obtained by using the mixture of TEOS(Si(OC2 H5)4) and aluminum-s-butoxide (Al (OC3 H7)3) as precursor through cycle infiltration at relative low temperature(&le 1200°C).
引用
收藏
页码：33 / 36
相关论文
共 50 条
  • [21] Comparison of the properties of Nextel 720/SiC composites at room temperature and 1300°C
    Chen, ZF
    Li, SB
    COMPOSITE INTERFACES, 2005, 12 (05) : 473 - 479
  • [22] Tension-Tension Fatigue Behavior of Notched Nextel™720/Alumina (N720/A) at Elevated Temperature
    Mall, S.
    Sullivan, M. A.
    SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 2009, 16 (04): : 235 - 245
  • [23] Effects of sintering temperature on mechanical properties of 3D mullite fiber (ALF FB3) reinforced mullite composites
    Wang, Yi
    Cheng, Haifeng
    Liu, Haitao
    Wang, Jun
    CERAMICS INTERNATIONAL, 2013, 39 (08) : 9229 - 9235
  • [24] 3D MEMS fabrication using low-temperature wafer bonding with benzocyclobutene (BCB)
    Chou, TKA
    Najafi, K
    TRANSDUCERS '01: EUROSENSORS XV, DIGEST OF TECHNICAL PAPERS, VOLS 1 AND 2, 2001, : 1570 - 1573
  • [25] Mullite 3D Printed Humidity Sensors
    Milovanov, Yurii
    Bertero, Arianna
    Coppola, Bartolomeo
    Palmero, Paola
    Tulliani, Jean-Marc
    CERAMICS-SWITZERLAND, 2024, 7 (02): : 807 - 820
  • [26] Materials and methods for the 3D structure fabrication of low temperature cofired ceramics for medium scale devices
    Suhas, K.
    C e Ca, 2009, 39 (03): : 169 - 176
  • [27] A Low Power 720p Motion Estimation Processor with 3D Stacked Memory
    Zhang, Shuping
    Zhou, Jinjia
    Zhou, Dajiang
    Goto, Satoshi
    2014 22ND INTERNATIONAL CONFERENCE ON VERY LARGE SCALE INTEGRATION (VLSI-SOC), 2014,
  • [28] Electrodeposition of Indium for Low Temperature 3D Stacking
    Inoue, Fumihiro
    Park, Kimoon
    Derakhshandeh, Jaber
    Yoo, Bongyoung
    2021 7TH INTERNATIONAL WORKSHOP ON LOW TEMPERATURE BONDING FOR 3D INTEGRATION (LTB-3D), 2021, : 31 - 31
  • [29] Low Temperature Cu/In Bonding for 3D Integration
    Panchenko, Iuliana
    Bickel, Steffen
    Meyer, Joerg
    Mueller, Maik
    Wolf, Juergen M.
    2017 5TH INTERNATIONAL WORKSHOP ON LOW TEMPERATURE BONDING FOR 3D INTEGRATION (LTB-3D), 2017, : 17 - 17
  • [30] Low temperature bonding for 3D integration FOREWORD
    Fujino, Masahisa
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2022, 61 (SF)
12345