Fabrication of 3D Nextel™ 720/Mullite at low temperature

被引：0
|
作者：
Zhang, Fu-Ping [1 ]
Chen, Zhao-Feng [1 ]
Zhang, Li-Tong [1 ]
Cheng, Lai-Fei [1 ]
Xu, Yong-Dong [1 ]
机构：
[1] State Key Lab. Solidification Proc., NW Polytechnical University, Xi'an 710072, China
来源：
Hangkong Cailiao Xuebao/Journal of Aeronautical Materials | 2002年 / 22卷 / 02期
关键词：
Fracture toughness - Infiltration - Pyrolysis - Strength of materials;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
3D Nextel™ 720/Mullite composites were fabricated by precursor infiltration pyrolysis method. Influence of the matrix component control, the dense of composite and the treating temperature on the fracture strength of composites was studied. The results indicted that the dense composite were obtained by using the mixture of TEOS(Si(OC2 H5)4) and aluminum-s-butoxide (Al (OC3 H7)3) as precursor through cycle infiltration at relative low temperature(&le 1200°C).
引用
收藏
页码：33 / 36
相关论文
共 50 条
  • [31] Low Temperature Bonding for 3D Integration FOREWORD
    Suga, Tadatomo
    Shigekawa, Naoteru
    Higurashi, Eiji
    Shimatsu, Takehito
    Sugiyama, Masakazu
    Takagi, Hideki
    Toyoda, Noriaki
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2018, 57 (02)
  • [32] Low Temperature Wafer Bonding for 3D Applications
    Burggraf, J.
    Bravin, J.
    Wiesbauer, H.
    Dragoi, V.
    PROCESSING, MATERIALS, AND INTEGRATION OF DAMASCENE AND 3D INTERCONNECTS 5, 2014, 58 (17): : 67 - 73
  • [33] Low temperature bonding technology for 3D integration
    Ko, Cheng-Ta
    Chen, Kuan-Neng
    MICROELECTRONICS RELIABILITY, 2012, 52 (02) : 302 - 311
  • [34] Low Temperature Bonding for 3D Integration FOREWORD
    Shigekawa, Naoteru
    Takagi, Hideki
    Fujino, Masahisa
    Higurashi, Eiji
    Nishiyama, Nobuhiko
    Shimatsu, Takehito
    Toyoda, Noriaki
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2020, 59 (SB)
  • [35] Fabrication of 3D Polycaprolactone Macrostructures by 3D Electrospinning
    Chinnakorn, Atchara
    Soi-Ngoen, Yanawarut
    Weeranantanapan, Oratai
    Pakawanit, Phakkhananan
    Maensiri, Santi
    Srisom, Kriettisak
    Janphuang, Pattanaphong
    Radacsi, Norbert
    Nuansing, Wiwat
    ACS BIOMATERIALS SCIENCE & ENGINEERING, 2024, 10 (08): : 5336 - 5351
  • [36] Effects of steam environment on creep behavior of Nextel™720/alumina ceramic composite at elevated temperature
    Ruggles-Wrenn, M. B.
    Braun, J. C.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 497 (1-2): : 101 - 110
  • [37] Fabrication of 3D MEMS toroidal microinductor for high temperature application
    Lei, Chong
    Zhou, Yong
    Gao, Xiao-Yu
    Ding, Wen
    Cao, Ying
    Zhou, Zhi-Min
    Choi, Hyung
    MICROELECTRONICS JOURNAL, 2006, 37 (11) : 1347 - 1351
  • [38] Fabrication of 3D Temperature Sensor Using Magnetostrictive Inkjet Printhead
    Park, Young-Woo
    Noh, Myounggyu
    JOURNAL OF IMAGING SCIENCE AND TECHNOLOGY, 2020, 64 (05)
  • [39] Low-temperature fabrication of calcium deficient hydroxyapatite bone scaffold by optimization of 3D printing conditions
    Raja, Naren
    Sung, Aram
    Park, Honghyun
    Yun, Hui-suk
    CERAMICS INTERNATIONAL, 2021, 47 (05) : 7005 - 7016
  • [40] Low-temperature fabrication of 3D drilled graphene sheets hydrogel for supercapacitors with ultralong cycle life
    Qiu, Zenghui
    He, Dawei
    Wang, Yongsheng
    Li, Jiayuan
    CHEMICAL PHYSICS LETTERS, 2017, 684 : 290 - 297
12345