Fabrication of 3D Nextel™ 720/Mullite at low temperature

被引：0
|
作者：
Zhang, Fu-Ping [1 ]
Chen, Zhao-Feng [1 ]
Zhang, Li-Tong [1 ]
Cheng, Lai-Fei [1 ]
Xu, Yong-Dong [1 ]
机构：
[1] State Key Lab. Solidification Proc., NW Polytechnical University, Xi'an 710072, China
来源：
Hangkong Cailiao Xuebao/Journal of Aeronautical Materials | 2002年 / 22卷 / 02期
关键词：
Fracture toughness - Infiltration - Pyrolysis - Strength of materials;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
3D Nextel™ 720/Mullite composites were fabricated by precursor infiltration pyrolysis method. Influence of the matrix component control, the dense of composite and the treating temperature on the fracture strength of composites was studied. The results indicted that the dense composite were obtained by using the mixture of TEOS(Si(OC2 H5)4) and aluminum-s-butoxide (Al (OC3 H7)3) as precursor through cycle infiltration at relative low temperature(&le 1200°C).
引用
收藏
页码：33 / 36
相关论文
共 50 条
  • [41] Metal nanoparticle direct inkjet printing for low-temperature 3D micro metal structure fabrication
    Ko, Seung Hwan
    Chung, Jaewon
    Hotz, Nico
    Nam, Koo Hyun
    Grigoropoulos, Costas P.
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2010, 20 (12)
  • [42] Mullite synthetization at low temperature
    Zeballos, Ariana
    Weihed, Par
    Blanco, Mario
    Machaca, Vladimir
    MINERAL DEPOSIT RESEARCH FOR A HIGH-TECH WORLD, VOLS. 1-4, 2013, : 1784 - 1786
  • [43] Creep behavior in interlaminar shear of Nextel™720/alumina ceramic composite at elevated temperature in air and in steam
    Ruggles-Wrenn, M. B.
    Laffey, P. D.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2008, 68 (10-11) : 2260 - 2266
  • [44] DESIGN AND FABRICATION OF A LOW COST DESKTOP ELECTROCHEMICAL 3D PRINTER
    Chen, Xiaolong
    Liu, Xinhua
    Childs, Peter
    Brandon, Nigel
    Wu, Billy
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING, 2018, : 395 - 400
  • [45] Fabrication of low-cost capacitive accelerometers by 3D microforming
    Qu, W
    Wenzel, C
    Drescher, K
    1996 CONFERENCE ON OPTOELECTRONIC AND MICROELECTRONIC MATERIALS AND DEVICES, PROCEEDINGS, 1996, : 462 - 465
  • [46] 3D fabrication of scaffolds from low cytotoxic vinylester and thiols
    Husar, B.
    Samusjew, A.
    Koch, T.
    Stampfl, J.
    Liska, R.
    JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE, 2014, 8 : 447 - 447
  • [47] Fabrication and Characteristic of Nextel 720 Fiber-Reinforced Silicon Nitride Matrix Composites by Chemical Vapor Infiltration Process
    Han, Guifang
    Liu, Yongsheng
    Zhang, Litong
    Cheng, Laifei
    International Journal of Applied Ceramic Technology, 2015, 12 (03) : 529 - 534
  • [48] Effects of steam environment on high-temperature mechanical behavior of Nextel™720/alumina (N720/A) continuous fiber ceramic composite
    Ruggles-Wrenn, M. B.
    Mall, S.
    Eber, C. A.
    Harlan, L. B.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2006, 37 (11) : 2029 - 2040
  • [49] Low-temperature DLP 3D printing of low-concentration collagen methacryloyl for the fabrication of durable and bioactive personalized scaffolds
    Yang, Xiaxia
    Yao, Linyan
    Sun, Xiuxia
    Wang, Lili
    Xiao, Jianxi
    CHEMICAL ENGINEERING JOURNAL, 2024, 497
  • [50] Evaluation of shellac-polyethylene glycol as an alternative material for fabrication of fused filament fabrication 3D printing filament at low extrusion temperature
    Chansatidkosol, Siraprapa
    Limmatvapirat, Chutima
    Sriamornsak, Pornsak
    Piriyaprasarth, Suchada
    Patomchaiviwat, Vipaluk
    Pamonsinlapatham, Perayot
    Chinatangkul, Nawinda
    Limmatvapirat, Sontaya
    JOURNAL OF APPLIED POLYMER SCIENCE, 2023, 140 (19)
12345