Comparison of Hole Surface Finishing Processes with Roller Burnishing Method Applied in Copper Materials

被引：0

作者：

Akkurt, Adnan ^{[1
]}

Kurt, Abdullah ^{[2
]}

Ozdemir, Ahmet ^{[2
]}

Seker, Ulvi ^{[2
]}

机构：

[1] Gazi Univ, Technol Fac, Dept Ind Design Engn, TR-06500 Ankara, Turkey

[2] Gazi Univ, Technol Fac, Dept Mfg Engn, TR-06500 Ankara, Turkey

来源：

GAZI UNIVERSITY JOURNAL OF SCIENCE | 2014年 / 27卷 / 01期

关键词：

Copper; hole machining processes; microstructure; surface roughness; roller burnishing method;

D O I：

暂无

中图分类号：

O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];

学科分类号：

07 ; 0710 ; 09 ;

摘要：

Surface finishing processes such as drilling, turning, reaming, grinding, honing and roller burnishing etc. are widely used in manufacturing as hole surface finishing process. In addition to the characteristics of hole such as the surface roughness, the surface hardness and the wear resistance, the circularity and cylindricality of hole are also effective on the performance of hole. In this paper, it is presented that different hole surface finishing processes were applied to the samples made of pure copper. As a result of all the measurements and assessments, the results of the study show that the roller burnishing method gives the best results in terms of mechanical, metallurgical properties and hole surface quality of the material.

引用

页码：721 / 734

页数：14

共 49 条

[31] Comparison study of two aldehyde group finishing agents in surface modification of up-conversion luminescence materials
Cui Lili
Fan Huili
Xiao Junping
Xu Xiaowei
RARE METALS, 2008, 27 (02) : 127 - 130
[32] Estimation of applied heat flux at the surface of ablating materials by using sequential function specification method
H. Farzan
T. Loulou
S. M. Hosseini Sarvari
Journal of Mechanical Science and Technology, 2017, 31 : 3969 - 3979
[33] Estimation of applied heat flux at the surface of ablating materials by using sequential function specification method
Farzan, H.
Loulou, T.
Sarvari, S. M. Hosseini
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2017, 31 (08) : 3969 - 3979
[34] A method for measuring surface relief in the study of strain processes and estimation of state of materials under loading
Syryamkin V.I.
Panin S.V.
Zuev N.A.
Chesnokov A.V.
Russian Physics Journal, 2001, 44 (11) : 1230 - 1236
[35] Comparison of shaft and flash smelting processes of copper production using thermo-ecological cost method
Boryczko, Bozena
Donizak, Janusz
Holda, Adam
Kolenda, Zygmunt
Norwisz, Jan
ECOS 2006: PROCEEDINGS OF THE 19TH INTERNATIONAL CONFERENCE ON EFFICIENCY, COST, OPTIMIZATION, SIMULATION AND ENVIRONMENTAL IMPACT OF ENERGY SYSTEMS, VOLS 1-3, 2006, : 663 - +
[36] Comparison of lead, cadmium, copper and cobalt adsorption onto metal oxides and organic materials in natural surface coatings
Dong, Deming
Liu, Liang
Hua, Xiuyi
Lu, Yongzheng
MICROCHEMICAL JOURNAL, 2007, 85 (02) : 270 - 275
[37] Comparison of Physico-Chemical and Antimicrobial Properties of Surface Treated Textile Materials with Silver, Copper and Bismuth Compounds
Djokic, Stojan
Djokic, Nada
Thundat, Thomas
SURFACE TREATMENTS FOR BIOMEDICAL APPLICATIONS 3, 2013, 45 (08): : 21 - 30
[38] DETERMINATION OF SPECIFIC SURFACE AREAS OF DISPERSED MATERIALS . COMPARISON OF NEGATIVE ADSORPTION METHOD WITH SOME OTHER METHODS
VANDENHUL, HJ
LYKLEMA, J
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 1968, 90 (12) : 3010 - +
[39] Study of surface treatment processes for improvement in the wettability of silicon-based materials used in high aspect ratio through-via copper electroplating
Dixit, Pradeep
Chen, Xiaofeng
Miao, Jianmin
Divakaran, Sheeja
Preisser, Robert
APPLIED SURFACE SCIENCE, 2007, 253 (21) : 8637 - 8646
[40] STUDY ON METAL-POWDER POLYMER COMPOSITE-MATERIALS .1. DETERMINATION OF OXIDES ON THE SURFACE OF COPPER POWDERS BY AN ACID DISSOLUTION METHOD
MORI, K
OKAI, Y
WATANABE, A
NAKAMURA, Y
NIPPON KAGAKU KAISHI, 1988, (02) : 149 - 152

← 1 2 3 4 5 →