Comparison of Hole Surface Finishing Processes with Roller Burnishing Method Applied in Copper Materials

被引：0

作者：

Akkurt, Adnan ^{[1
]}

Kurt, Abdullah ^{[2
]}

Ozdemir, Ahmet ^{[2
]}

Seker, Ulvi ^{[2
]}

机构：

[1] Gazi Univ, Technol Fac, Dept Ind Design Engn, TR-06500 Ankara, Turkey

[2] Gazi Univ, Technol Fac, Dept Mfg Engn, TR-06500 Ankara, Turkey

来源：

GAZI UNIVERSITY JOURNAL OF SCIENCE | 2014年 / 27卷 / 01期

关键词：

Copper; hole machining processes; microstructure; surface roughness; roller burnishing method;

D O I：

暂无

中图分类号：

O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];

学科分类号：

07 ; 0710 ; 09 ;

摘要：

Surface finishing processes such as drilling, turning, reaming, grinding, honing and roller burnishing etc. are widely used in manufacturing as hole surface finishing process. In addition to the characteristics of hole such as the surface roughness, the surface hardness and the wear resistance, the circularity and cylindricality of hole are also effective on the performance of hole. In this paper, it is presented that different hole surface finishing processes were applied to the samples made of pure copper. As a result of all the measurements and assessments, the results of the study show that the roller burnishing method gives the best results in terms of mechanical, metallurgical properties and hole surface quality of the material.

引用

页码：721 / 734

页数：14

共 49 条

[21] Comparison of barrier materials and deposition processes for copper integration
Moussavi, M
Gobil, Y
Ulmer, L
Perroud, L
Motte, P
Torres, J
Romagna, F
Fayolle, M
Palleau, J
Plissonnier, M
PROCEEDINGS OF THE IEEE 1998 INTERNATIONAL INTERCONNECT TECHNOLOGY CONFERENCE, 1998, : 295 - 297
[22] Synchronous finish processes using grinding and ultrasonic electrochemical finishing on hole-wall surface
Pa, P.S.
Key Engineering Materials, 2009, 389-390 : 295 - 301
[23] Synchronous Finish Processes Using Grinding and Ultrasonic Electrochemical Finishing on Hole-Wall Surface
Pa, P. S.
ADVANCES IN ABRASIVE TECHNOLOGY XI, 2009, 389-390 : 295 - 301
[24] Impact of industrially applied surface finishing processes on tribocorrosion performance of 316L stainless steel
Kossman, Stephania
Coelho, Leonardo B.
Mejias, Alberto
Montagne, Alex
Gorp, Adrien Van
Coorevits, Thierry
Touzin, Matthieu
Poorteman, Marc
Olivier, M. -G.
Iost, Alain
Staia, Mariana H.
WEAR, 2020, 456
[25] Surface finishing of hardened and tempered stainless tool steel using sequential ball grinding, ball burnishing and ball polishing processes on a machining centre
Shiou, Fang-Jung
Hsu, Chih-Cheng
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 205 (1-3) : 249 - 258
[26] Numerical Simulation for Hole-drilling Strain Gage Method Applied on Curved Surface
Ma X.
Ou Q.
Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science), 2019, 47 (12): : 25 - 31
[27] GPA Combined with the Hole-Drilling Method Applied for Curved Surface Strain Measurement
Liu, Z. W.
Zhou, J. F.
Wu, C. L.
Xie, H. M.
STRAIN, 2013, 49 (01) : 46 - 53
[28] Parametric investigation and optimization of revolving tools-based magnetorheological finishing process for external cylindrical surface of printing machine roller made of copper
Singh, Gagandeep
Jayant, Arvind
Singh, Manpreet
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024, 238 (05) : 2331 - 2342
[29] Method of Curing Deformation Prediction and Surface Reconstruction Compensation for Roller-Hemming Structures with Dissimilar Materials
Li J.
Zhu W.
Sun H.
Li Y.
Wang S.
Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 2022, 56 (07): : 965 - 976
[30] Comparison study of two aldehyde group finishing agents in surface modification of up-conversion luminescence materials
CUI Lili~a FAN Huili~a XIAO Junping~a XU Xiaowei~b ~a Department of Chemistry
Rare Metals, 2008, (02) : 127 - 130

← 1 2 3 4 5 →