STUDY OF CRITICAL FAILURE PARAMETERS FOR AN ADHESIVE-BONDED SINGLE LAP JOINT WITH CERAMIC ADHERENDS

被引：12

作者：

BAZIARD, Y ^{[1
]}

ELABDI, R ^{[1
]}

AMARA, D ^{[1
]}

PETIT, JA ^{[1
]}

LEVALLOIS, F ^{[1
]}

机构：

[1] MATRA MARCONI SPACE,F-31077 TOULOUSE,FRANCE

来源：

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES | 1995年 / 15卷 / 03期

关键词：

STRUCTURAL ADHESIVE; CERAMIC ADHEREND; ADHESIVE-BONDED JOINTS; FINITE ELEMENT METHOD; FRACTURE MECHANICS;

D O I：

10.1016/0143-7496(95)91626-H

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

The failure behaviour of an adhesive-bonded single lap joint with ceramic (silicon carbide) adherends has been investigated using an experimental crack test in which the conditions are close to those in the ASTM D2293-69 standard test. The critical strain energy release rate (G(IIC)) and the critical stress intensity factor in shear mode (K-IIC) are the propagation criteria used. The ANSYS finite element code has been used to model the experimental work, with good agreement being obtained between experimental and numerical results. Adhesive and cohesive failures of the joints were encountered, with different values of G(IIC) and K-IIC for each type of failure. The G(IIC) value observed for cohesive failure of the joint is 10 times greater than that calculated for adhesive failure.

引用

页码：155 / 160

页数：6

共 50 条

[21] Elastic flexural behaviour of an adhesively bonded single lap joint with functionally graded adherends
Kemal Apalak, M.
Gunes, Recep
MATERIALS & DESIGN, 2007, 28 (05) : 1597 - 1617
[22] Failure behaviour of the adhesive layer and angle ply composite adherends in single lap joints: A numerical study
Demiral, Murat
Kadioglu, Ferhat
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2018, 87 : 181 - 190
[23] NON-LINEAR NUMERICAL STRESS ANALYSIS OF A SYMMETRIC ADHESIVE-BONDED LAP JOINT.
Univ of Waterloo, Waterloo, Ont, Can, Univ of Waterloo, Waterloo, Ont, Can
Int J Adhes Adhes, 1986, 3 (157-160):
[24] FRACTURE STRENGTH OF AN ADHESIVE-BONDED JOINT.
Czarnocki, P.
Piekarski, K.
1600, (06):
[25] Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive
Avendano, R.
Carbas, R. J. C.
Marques, E. A. S.
da Silva, L. F. M.
Fernandes, A. A.
COMPOSITE STRUCTURES, 2016, 152 : 34 - 44
[26] Strengthening of the adhesive bond using a mixture of adhesives between dissimilar adherends in a single lap joint
Jairaja, R.
Naik, G. Narayana
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2020, 34 (06) : 579 - 598
[27] Single-lap joints of similar and dissimilar adherends bonded with a polyurethane adhesive used in the automotive industry
Ciardiello, R.
Niutta, C. Boursier
Di Sciullo, F.
Goglio, L.
49TH ITALIAN ASSOCIATION FOR STRESS ANALYSIS CONFERENCE (AIAS 2020), 2021, 1038
[28] Numerical analysis of the adherends with similar thickness on weld-bonded single lap aluminium joint
Li, Jianli
Wang, Peng
You, Min
INTERNATIONAL CONFERENCE ON COMPOSITE MATERIAL, POLYMER SCIENCE AND ENGINEERING (CMPSE2017), 2017, 130
[29] Investigation of elastic stresses in an adhesively bonded single lap joint with functionally graded adherends in tension
Apalak, MK
Gunes, R
COMPOSITE STRUCTURES, 2005, 70 (04) : 444 - 467
[30] ANALYSIS OF ADHESIVE-BONDED CYLINDRICAL LAP JOINTS SUBJECTED TO AXIAL LOAD
SHI, YP
CHENG, S
JOURNAL OF ENGINEERING MECHANICS, 1993, 119 (03) : 584 - 602

← 1 2 3 4 5 →