STUDY OF CRITICAL FAILURE PARAMETERS FOR AN ADHESIVE-BONDED SINGLE LAP JOINT WITH CERAMIC ADHERENDS

被引：12
|
作者：
BAZIARD, Y [1 ]
ELABDI, R [1 ]
AMARA, D [1 ]
PETIT, JA [1 ]
LEVALLOIS, F [1 ]
机构：
[1] MATRA MARCONI SPACE,F-31077 TOULOUSE,FRANCE
来源：
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES | 1995年 / 15卷 / 03期
关键词：
STRUCTURAL ADHESIVE; CERAMIC ADHEREND; ADHESIVE-BONDED JOINTS; FINITE ELEMENT METHOD; FRACTURE MECHANICS;
D O I：
10.1016/0143-7496(95)91626-H
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
The failure behaviour of an adhesive-bonded single lap joint with ceramic (silicon carbide) adherends has been investigated using an experimental crack test in which the conditions are close to those in the ASTM D2293-69 standard test. The critical strain energy release rate (G(IIC)) and the critical stress intensity factor in shear mode (K-IIC) are the propagation criteria used. The ANSYS finite element code has been used to model the experimental work, with good agreement being obtained between experimental and numerical results. Adhesive and cohesive failures of the joints were encountered, with different values of G(IIC) and K-IIC for each type of failure. The G(IIC) value observed for cohesive failure of the joint is 10 times greater than that calculated for adhesive failure.
引用
收藏
页码：155 / 160
页数：6
相关论文
共 50 条
  • [31] EFFECTS OF FLAW DISTRIBUTION IN ADHESIVE-BONDED LAP JOINTS BY PHOTOELASTICITY METHOD
    WOO, CW
    CHOW, CL
    EXPERIMENTAL MECHANICS, 1980, 20 (05) : N40 - N40
  • [32] Analysis of single lap adhesive composite joints with delaminated adherends
    Qin, MH
    Dzenis, YA
    COMPOSITES PART B-ENGINEERING, 2003, 34 (02) : 167 - 173
  • [33] STRENGTH AND FAILURE MODES OF BONDED SINGLE LAP JOINTS BETWEEN CROSS-PLY ADHERENDS
    KAIROUZ, KC
    MATTHEWS, FL
    COMPOSITES, 1993, 24 (06): : 475 - 484
  • [34] Strength improvement in single lap adhesive joints by notching the adherends
    Bahrami, B.
    Ayatollahi, M. R.
    Beigrezaee, M. J.
    da Silva, L. F. M.
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2019, 95
  • [35] Effect of nanostructured reinforcement of adhesive on thermal cycling performance of a single-lap joint with composite adherends
    Akpinar, Salih
    Akpinar, Iclal Avinc
    COMPOSITES PART B-ENGINEERING, 2019, 175
  • [36] 3D explicit finite element analysis of tensile failure behavior in adhesive-bonded composite single-lap joints
    Ye, Jinxin
    Yan, Ying
    Li, Jie
    Hong, Yang
    Tian, Ziyang
    COMPOSITE STRUCTURES, 2018, 201 : 261 - 275
  • [37] Taguchi-Based ANN Predictions to Analyze the Tensile Strength of Adhesive-Bonded Single Lap Joints
    Ravichandran, G.
    Rathnakar, G.
    Ratan, Pinto
    Joshy, John
    Vishal, Suresh
    MATERIALS PERFORMANCE AND CHARACTERIZATION, 2018, 7 (01) : 186 - 201
  • [38] A unified theory of adhesive-bonded tubular joints with dissimilar adherends subjected to a multiplicity of axisymmetric loads
    Sukhaya, Thitipol
    Aimmanee, Sontipee
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2022, 112
  • [39] Analysis of factors influencing lap-shear strength of adhesive-bonded joint based on response surface method
    Yang, Sa
    Zhang, Yan-Song
    Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University, 2015, 49 (10): : 1487 - 1491
  • [40] Effect of different joint angles on the mechanical strength of adhesive-bonded scarf and double butt-lap joints
    Yanen, Cenk
    Solmaz, Murat Yavuz
    MATERIALS TESTING, 2022, 64 (05) : 726 - 735
12345