Numerical analysis of the adherends with similar thickness on weld-bonded single lap aluminium joint

被引：2
|
作者：
Li, Jianli [1 ]
Wang, Peng [2 ]
You, Min [1 ,3 ]
机构：
[1] Hubei Three Gorges Polytech, Yichang 443000, Peoples R China
[2] Power Construct Corp China, Wuhan Tower Works, Wuhan 430011, Hubei, Peoples R China
[3] China Three Gorges Univ, Hubei Key Lab Hydroelect Machinery Design & Maint, Yichang 443002, Peoples R China
来源：
INTERNATIONAL CONFERENCE ON COMPOSITE MATERIAL, POLYMER SCIENCE AND ENGINEERING (CMPSE2017) | 2017年 / 130卷
关键词：
STRENGTH;
D O I：
10.1051/matecconf/201713006002
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of the adherend with similar thickness varied from 1 mm to 3 mm on the stress distribution in weld-bonded single lap aluminium joint was investigated using elasto-plastic finite element method (FEM). The results from the numerical simulation show that all the values of the peak stresses along the mid-bondline at the points near the both ends of the lap zone as well as the ones in the region of the nugget are increased when the adherend thickness increased. It is suggested that the adherend thickness of 2 mm to 2.5 mm be appropriate to optimize the stress distribution in the weld-bonded single lap aluminium joint.
引用
收藏
页数：4
相关论文
共 50 条
  • [1] Numerical Analysis of the Nugget Location on the Weld-bonded Single Lap Aluminum Joint
    Li, Jian-Li
    You, Min
    Wang, Peng
    Yu, Hai-Zhou
    [J]. PROCEEDINGS OF THE 4TH 2016 INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND ENGINEERING (ICMSE 2016), 2016, 101 : 404 - 408
  • [2] Effect of Inner Step Length on the Stress Distribution in Weld-bonded Single Lap Aluminum Joint
    Li, Jian-Li
    Wang, Peng
    You, Min
    [J]. PROCEEDINGS OF THE 4TH 2016 INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND ENGINEERING (ICMSE 2016), 2016, 101 : 399 - 403
  • [3] Adhesive, welded and weld-bonded single-lap joints: Numerical technique for strength prediction
    Juntas de sobreposição simples adesivas, soldadas e adesivas-soldadas: Modelo numérico para previsão da resistência
    [J]. Campilho, R.D.S.G. (raulcampilho@gmail.com), 1600, Elsevier B.V., Netherlands (24): : 1 - 2
  • [4] A numerical and experimental study of adhesively bonded aluminium single lap joints with an inner chamfer on the adherends
    You, Min
    Yan, Zhan-Mou
    Zheng, Xiao-Ling
    Yu, Hai-Zhou
    Li, Zhi
    [J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2008, 28 (1-2) : 71 - 76
  • [5] Effect of Nugget Size on Stress Distribution in Weld-bonded Single Lap DP 600 Steel Joint
    You, Min
    Xu, Jian-Jun
    Li, Jian-Li
    Huang, Cai-Hua
    [J]. PROCEEDINGS OF THE 4TH 2016 INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND ENGINEERING (ICMSE 2016), 2016, 101 : 427 - 431
  • [6] Analysis of T-Peel Weld-bonded Joint with Single Overlap Support
    Al-Samhan, Ali M.
    [J]. ADVANCED ENGINEERING MATERIALS, PTS 1-3, 2011, 194-196 : 2276 - 2283
  • [7] Effect of Elastic Modulus of Adhesives on Stress Distribution in Weld-bonded Single Lap DP 600 Steel Joint
    You, Min
    Xu, Jian-Jun
    Li, Jian-Li
    Yu, Hai-Zhou
    [J]. PROCEEDINGS OF THE 4TH 2016 INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND ENGINEERING (ICMSE 2016), 2016, 101 : 409 - 413
  • [8] Single-Lap Joints of Similar and Dissimilar Adherends Bonded with an Acrylic Adhesive
    Pinto, A. M. G.
    Magalhaes, A. G.
    Campilho, R. D. S. G.
    de Moura, M. F. S. F.
    Baptista, A. P. M.
    [J]. JOURNAL OF ADHESION, 2009, 85 (06): : 351 - 376
  • [9] Aluminium friction-stir weld-bonded joints
    [J]. Braga, Daniel F. O. (dbraga@inegi.up.pt), 1600, Bellwether Publishing, Ltd. (92): : 7 - 9
  • [10] Aluminium Friction-stir Weld-bonded Joints
    Braga, Daniel F. O.
    De Sousa, L. M. C.
    Infante, V.
    Da Silva, Lucas F. M.
    Moreira, P. M. G. P.
    [J]. JOURNAL OF ADHESION, 2016, 92 (7-9): : 665 - 678
12345