AMORPHIZATION OF MGO SINGLE-CRYSTAL SPECIMENS PREPARED BY ION MILLING FOR TRANSMISSION ELECTRON-MICROSCOPY STUDIES

Single crystal MgO specimens having low load Vickers indentations were thinned in an ion milling machine employing a single ion gun, and their characteristics were investigated with optical microscopy and high voltage electron microscopy (HVEM). It was found that the state of cleanliness of the specimen chamber of the ion milling machine had a very marked influence on the quality of the thinned specimens. If the specimen chamber was not well cleaned before ion milling a fresh specimen, the latter tended to show amorphisation due to the deposition on the specimen of the debris left in the chamber from the previously ionmilled specimens. Such observations were made from MgO specimens ion milled in several different types of commercial ion milling machine employing a single gun. It is proposed that to obtain goodquality ion milled TEM specimens, it is important to clean the specimen chamber thoroughly prior to milling. Copyright1990 WileyLiss, Inc.