Overview Post-combustion CO2 capture

被引:0
|
作者
Romeo, L. M. [1 ]
Bolea, I. [1 ]
机构
[1] Univ Zaragoza, CIRCE, Mariano Esquillor 15, Zaragoza 50018, Spain
来源
关键词
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Postcombustion CO2 capture technology is mainly based on chemical absorption processes on the flue gas stream. This technology is widely used in other industries. The main challenge in a CCS (CO2 capture and Storage) context is the adaptation of the technology to the operating conditions existing in large combustion boilers, especially in coal burners. Corrosion derived from the use of CO2-rich solvents and the high amount of energy used during solvent regeneration are the main problems arised for the scale-up of the technology. This paper gives a global vision of the state of the art of the chemical absorption technology applied to the CO2 capture process. It covers the lastest developments in solvents as well as the strategies to minimize the impact of thermal requirements in power plants.
引用
收藏
页码:8 / 11
页数:4
相关论文
共 50 条
  • [21] Ionic liquids as an alternative to CO2 post-combustion capture
    Gimeno, M. P.
    Mayoral, M. C.
    Andres, J. M.
    [J]. BOLETIN DEL GRUPO ESPANOL DEL CARBON, 2013, (30): : 2 - 5
  • [22] Dynamic Operation and Simulation of Post-Combustion CO2 Capture
    Gaspar, Jozsef
    Gladis, Arne
    Jorgensen, John Bagterp
    Thomsen, Kaj
    von Solms, Nicolas
    Fosbol, Philip Loldrup
    [J]. 8TH TRONDHEIM CONFERENCE ON CO2 CAPTURE, TRANSPORT AND STORAGE, 2016, 86 : 205 - 214
  • [23] Capacity and kinetics of solvents for post-combustion CO2 capture
    Bruder, Peter
    Svendsen, Hallvard F.
    [J]. 6TH TRONDHEIM CONFERENCE ON CO2 CAPTURE, TRANSPORT AND STORAGE, 2012, 23 : 45 - 54
  • [24] Development of adsorbent technologies for post-combustion CO2 capture
    Drage, T. C.
    Smith, K. M.
    Pevida, C.
    Arenillas, A.
    Snape, C. E.
    [J]. GREENHOUSE GAS CONTROL TECHNOLOGIES 9, 2009, 1 (01): : 881 - 884
  • [25] Numerical Evaluation of CO2 Capture on Post-combustion Processes
    Chavez, Rosa-Hilda
    Guadarrama, Javier J.
    [J]. PRES15: PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION, 2015, 45 : 271 - 276
  • [26] Sensor placement for post-combustion CO2 capture plants
    Liu, Siyu
    Yin, Xunyuan
    Liu, Jinfeng
    [J]. 2023 AMERICAN CONTROL CONFERENCE, ACC, 2023, : 3454 - 3459
  • [27] Exergoeconomic Analysis of Post-Combustion CO2 Capture Processes
    Schach, M. -O.
    Schneider, R.
    Schramm, H.
    Repke, J. -U.
    [J]. 20TH EUROPEAN SYMPOSIUM ON COMPUTER AIDED PROCESS ENGINEERING, 2010, 28 : 997 - 1002
  • [28] Chemical looping for pre-combustion and post-combustion CO2 capture
    Mantripragada, Hari C.
    Rubin, Edward S.
    [J]. 13TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, GHGT-13, 2017, 114 : 6403 - 6410
  • [29] CO2 Absorption/Desorption Enhanced by Nanoparticles in Post-combustion CO2 Capture
    Yu, W.
    Wang, T.
    Fang, M. X.
    Hei, H.
    Luo, Z. Y.
    [J]. CLEAN COAL TECHNOLOGY AND SUSTAINABLE DEVELOPMENT, 2016, : 591 - 596
  • [30] Hybrid membrane cryogenic process for post-combustion Co2 capture
    Belaissaoui, B.
    Le Moullec, Y.
    Willson, D.
    Favre, E.
    [J]. EUROMEMBRANE CONFERENCE 2012, 2012, 44 : 417 - 421