Influence of Temperature on Friction and Wear Characteristics of Polyaryletherketones and Their Composites Under Reciprocating Sliding Condition

被引：0
|
作者：
A. P. Harsha
R. Wäsche
机构：
[1] Indian Institute of Technology (Banaras Hindu University),Department of Mechanical Engineering
[2] Federal Institute for Materials Research and Testing,Macro
[3] (BAM),Tribology and Wear Protection
来源：
Journal of Materials Engineering and Performance | 2018年 / 27卷
关键词：
composite; PAEKs; reciprocating sliding; solid lubricants; wear mechanisms;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The tribological behavior of different polyaryletherketones (PAEKs) and their composites was studied under reciprocating sliding conditions at room temperature as well as at elevated temperature (120 °C). The effect of glass, carbon fiber and solid lubricants (PTFE and graphite) filled in PAEK matrix was investigated at different normal loads. It was found that friction and wear characteristics are strongly influenced by the type of PAEK matrix and the material composition. The temperature has a more pronounced influence on the coefficient of friction and specific wear rates of PAEKs and their composites than the normal load. Friction and wear mechanisms are discussed, using scanning electron micrographs of the worn surfaces. A relationship between the average coefficient of friction and specific wear rates of PAEKs and their composites is also reported.
引用
收藏
页码：5438 / 5449
页数：11
相关论文
共 50 条
  • [41] FRICTION, WEAR, AND TEMPERATURE IN SLIDING CONTACT
    ALRUBEYE, HS
    JOURNAL OF LUBRICATION TECHNOLOGY-TRANSACTIONS OF THE ASME, 1980, 102 (01): : 107 - 112
  • [42] Effect of initial contact surface condition on the friction and wear properties of bearing steel in cyclic reciprocating sliding contact
    Tanaka, Y.
    Endo, M.
    Moriyama, S.
    6TH INTERNATIONAL CONFERENCE ON FRACTURE FATIGUE AND WEAR (FFW), 2017, 843
  • [43] The influence of Strontium addition on wear properties of Al-20 wt% Si alloys under dry reciprocating sliding condition
    Liu, Gang
    Li, Guodong
    Cai, Anhui
    Chen, Zhaoke
    MATERIALS & DESIGN, 2011, 32 (01) : 121 - 126
  • [44] Reciprocating sliding wear studies on Si/SiC ceramic composites
    Amirthan, G.
    Balasubramanian, M.
    WEAR, 2011, 271 (7-8) : 1039 - 1049
  • [45] Wear mechanisms of nitinol under reciprocating sliding contact
    Neupane, Rabin
    Farhat, Zoheir
    WEAR, 2014, 315 (1-2) : 25 - 30
  • [46] Friction and wear behavior of carbon nanotubes reinforced polyamide 6 composites under dry sliding and water lubricated condition
    Meng, H.
    Sui, G. X.
    Xie, G. Y.
    Yang, R.
    COMPOSITES SCIENCE AND TECHNOLOGY, 2009, 69 (05) : 606 - 611
  • [47] ON SLIDING FRICTION AND WEAR OF PEEK AND ITS COMPOSITES
    LU, ZP
    FRIEDRICH, K
    WEAR, 1995, 181 : 624 - 631
  • [48] MEASUREMENT OF FRICTION COEFFICIENT UNDER RECIPROCATING SLIDING CONDITIONS
    OTHMAN, MO
    ELKHOLY, AH
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 1994, 13 (02) : 215 - 225
  • [49] Effect of temperature on the wear of an electroless nickel coating under lubricated reciprocating sliding conditions
    Liu, Yugang
    Tandon, K. N.
    TRIBOLOGY LETTERS, 1996, 2 (03) : 263 - 272
  • [50] Wear experiments with selected engineering polymers and polymer composites under dry reciprocating sliding conditions
    Franklin, SE
    WEAR, 2001, 251 : 1591 - 1598
12345