Influence of Temperature on Friction and Wear Characteristics of Polyaryletherketones and Their Composites Under Reciprocating Sliding Condition

被引：0

作者：

A. P. Harsha

R. Wäsche

机构：

[1] Indian Institute of Technology (Banaras Hindu University),Department of Mechanical Engineering

[2] Federal Institute for Materials Research and Testing,Macro

[3] (BAM),Tribology and Wear Protection

来源：

Journal of Materials Engineering and Performance | 2018年 / 27卷

关键词：

composite; PAEKs; reciprocating sliding; solid lubricants; wear mechanisms;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The tribological behavior of different polyaryletherketones (PAEKs) and their composites was studied under reciprocating sliding conditions at room temperature as well as at elevated temperature (120 °C). The effect of glass, carbon fiber and solid lubricants (PTFE and graphite) filled in PAEK matrix was investigated at different normal loads. It was found that friction and wear characteristics are strongly influenced by the type of PAEK matrix and the material composition. The temperature has a more pronounced influence on the coefficient of friction and specific wear rates of PAEKs and their composites than the normal load. Friction and wear mechanisms are discussed, using scanning electron micrographs of the worn surfaces. A relationship between the average coefficient of friction and specific wear rates of PAEKs and their composites is also reported.

引用

页码：5438 / 5449

页数：11

共 50 条

[21] Influence of TiB2 and wear conditions on friction and wear behaviour of SiC ceramics in reciprocating sliding
Prakasarao, Chodisetti Surya
Kalin, Mitjan
Kumar, Venkata Manoj
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2024, 44 (05) : 2704 - 2719
[22] Tribological characterisation of ceramic materials - Friction and wear under reciprocating sliding motion.
Klaffke, D
Hartelt, M
Koesling, F
MATERIALPRUFUNG, 1999, 41 (7-8): : 286 - 293
[23] Effect of hBN content on the friction and wear characteristics of B4C-hBN ceramic composites under dry sliding condition
Li, Xiuqing
Gao, Yimin
Pan, Wu
Zhong, Zhichao
Song, Liancheng
Chen, Wei
Yang, Qingxia
CERAMICS INTERNATIONAL, 2015, 41 (03) : 3918 - 3926
[24] Study on Friction and Wear Performance of Sliding Metal Seal Materials Under Reciprocating Motion
Yao, Huiqian
Liang, Xiaoyang
Guo, Lianchao
Wang, Xinpeng
Bai, Linqing
Wang, Chao
MATERIALS, 2024, 17 (20)
[25] Effect of surface temperature rise on friction characteristics for sliding speed under unlubricated condition
Nakahara, T.
Momozono, S.
O-rur, A.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2010, 224 (J3) : 271 - 278
[26] Chemical phenomena on the sliding surface and their influence on friction and wear characteristics
Hibi, Y
JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 2001, 46 (09) : 708 - 713
[27] A comparative investigation of the friction and wear behavior of polyimide composites under dry sliding and water-lubricated condition
Jia, JH
Zhou, HD
Gao, SQ
Chen, JM
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 356 (1-2): : 48 - 53
[28] Effect of MWCNTs and heat treatment on coefficient of friction and wear characteristics of MWCNTs reinforced Al6082 composites under dry sliding condition
Baghel, Madhusudan
Krishna, Chimata Murali
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2023, 237 (18) : 4295 - 4306
[29] Evaluation of Mechanical, Friction, and Wear Characteristics of Nano-SiC Filled Ortho Cresol Novalac Epoxy Composites under Dry Sliding Condition
Dass, Kali
Chauhan, S. R.
Gaur, Bharti
ADVANCES IN POLYMER TECHNOLOGY, 2015, 34 (02)
[30] Friction and wear characteristics of WC-Co cemented carbides in dry reciprocating sliding contact
Bonny, K.
De Baets, P.
Perez, Y.
Vleugels, J.
Lauwers, B.
WEAR, 2010, 268 (11-12) : 1504 - 1517

← 1 2 3 4 5 →