Influence of Temperature on Friction and Wear Characteristics of Polyaryletherketones and Their Composites Under Reciprocating Sliding Condition

被引：0
|
作者：
A. P. Harsha
R. Wäsche
机构：
[1] Indian Institute of Technology (Banaras Hindu University),Department of Mechanical Engineering
[2] Federal Institute for Materials Research and Testing,Macro
[3] (BAM),Tribology and Wear Protection
来源：
Journal of Materials Engineering and Performance | 2018年 / 27卷
关键词：
composite; PAEKs; reciprocating sliding; solid lubricants; wear mechanisms;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The tribological behavior of different polyaryletherketones (PAEKs) and their composites was studied under reciprocating sliding conditions at room temperature as well as at elevated temperature (120 °C). The effect of glass, carbon fiber and solid lubricants (PTFE and graphite) filled in PAEK matrix was investigated at different normal loads. It was found that friction and wear characteristics are strongly influenced by the type of PAEK matrix and the material composition. The temperature has a more pronounced influence on the coefficient of friction and specific wear rates of PAEKs and their composites than the normal load. Friction and wear mechanisms are discussed, using scanning electron micrographs of the worn surfaces. A relationship between the average coefficient of friction and specific wear rates of PAEKs and their composites is also reported.
引用
收藏
页码：5438 / 5449
页数：11
相关论文
共 50 条
  • [31] WEAR OF RECIPROCATING SEALS UNDER UNLUBRICATED CONDITION
    TANAKA, A
    JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 1989, 34 (05) : 391 - 392
  • [32] Wear Behavior of Polyaryletherketones Under Multi-directional Sliding and Fretting Conditions
    Laux, K. A.
    Sue, H. J.
    Montoya, A.
    Bremner, T.
    TRIBOLOGY LETTERS, 2015, 58 (03)
  • [33] Friction properties and wear mechanisms of a TZP/steel reciprocating sliding couple under water lubrication
    Lanzhou Inst of Chemical Phy, Chinese Acad of Sciences, Lab of Solid Lubrication, Lanzhou 730000, China
    Tribol Trans, 4 (627-632):
  • [34] FRICTION AND WEAR BEHAVIOR OF CERAMIC-HARDENED STEEL COUPLES UNDER RECIPROCATING SLIDING MOTION
    HE, YJ
    WINNUBST, AJA
    SCHIPPER, DJ
    BAKKER, PMV
    BURGGRAAF, AJ
    VERWEIJ, H
    WEAR, 1995, 184 (01) : 33 - 43
  • [35] Friction properties and wear mechanisms of a TZP/steel reciprocating sliding couple under water lubrication
    Liu, HW
    Xue, QJ
    TRIBOLOGY TRANSACTIONS, 1997, 40 (04): : 627 - 632
  • [36] Influence of normal force and humidity on the friction and wear of unlubricated reciprocating sliding steel/steel couples
    Klaffke, D.
    TriboTest, 2004, 10 (04): : 311 - 325
  • [37] Wear Behavior of Polyaryletherketones Under Multi-directional Sliding and Fretting Conditions
    K. A. Laux
    H. J. Sue
    A. Montoya
    T. Bremner
    Tribology Letters, 2015, 58
  • [38] FRICTION AND WEAR CHARACTERISTICS OF MAGNETORHEOLOGICAL ELASTOMER UNDER VIBRATING CONDITION
    Lian, Chenglong
    Lee, Kwang-Hee
    Lee, Chul-Hee
    Lee, Eun-Sang
    M2D2015: PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN, 2015, : 501 - 504
  • [39] Friction and wear characteristics of silicon nitride ceramics under dry friction condition
    Yao, Jinmei
    Wu, Yuhou
    Sun, Jian
    Tian, Junxing
    Zhou, Peng
    Bao, Zhigang
    Xia, Zhongxian
    Gao, Longfei
    MATERIALS RESEARCH EXPRESS, 2021, 8 (03)
  • [40] A COMPARISON OF WEAR OF ANNEALED CARBON-STEELS BETWEEN RECIPROCATING FRICTION AND UNIDIRECTIONAL FRICTION UNDER A LUBRICATED CONDITION
    YAHATA, N
    HAYAMA, F
    BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1982, 25 (204): : 1014 - 1021
12345