Corrosion Behavior of Sn-3.0Ag-0.5Cu Lead-Free Solder in Potassium Hydroxide Electrolyte

被引：0
|
作者：
Mui Chee Liew
Ibrahym Ahmad
Liu Mei Lee
Muhammad Firdaus Mohd Nazeri
Habsah Haliman
Ahmad Azmin Mohamad
机构：
[1] School of Materials and Mineral Resources Engineering,
[2] Universiti Sains Malaysia,undefined
来源：
Metallurgical and Materials Transactions A | 2012年 / 43卷
关键词：
SnO2; Solder Joint; Corrosion Product; Passive Film; Potentiodynamic Polarization;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The corrosion behavior of Sn-3.0Ag-0.5Cu (SAC305) solder alloy in 6 M potassium hydroxide electrolyte was investigated using polarization analysis. The results revealed that SAC305 is susceptible to corrosion because of the dissolution of the Sn phase. The corrosion potential (Ecorr) and corrosion current density (icorr) obtained from the sample was –1.108 V vs Hg/HgO and 1.795 × 10−4 A cm−2, respectively. In addition, microstructural and elemental characterization revealed the presence of tin oxide, Cu, and/or Ag-containing corrosion product on the surface of the corroded sample. The morphology of the samples was also observed to contain several pits, cracks, and pore-like structures.
引用
收藏
页码：3742 / 3747
页数：5
相关论文
共 50 条
  • [41] Role of bismuth in the mechanical and corrosion properties of Cu/Sn-3.0Ag-0.5Cu/Cu solder lap joints
    Zhu, Langfeng
    Chen, Wenjing
    Hu, Xiaowu
    Zhang, Zezong
    Chen, Bin
    Wang, Jue
    Tan, Sifan
    Jiang, Xiongxin
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2024, 35 (02)
  • [42] Investigation of microstructure and wetting behavior of Sn-3.0Ag-0.5Cu (SAC305) lead-free solder with additions of 1.0 wt % SiC on copper substrate
    Pal, Manoj Kumar
    Gergely, Greta
    Koncz-Horvath, Daniel
    Gacsi, Zoltan
    INTERMETALLICS, 2021, 128
  • [43] Melting and solidification properties of the nanoparticles of Sn3.0Ag0.5Cu lead-free solder alloy
    Zou, Changdong
    Gao, Yulai
    Yang, Bin
    Zhai, Qijie
    MATERIALS CHARACTERIZATION, 2010, 61 (04) : 474 - 480
  • [44] Role of bismuth in the mechanical and corrosion properties of Cu/Sn-3.0Ag-0.5Cu/Cu solder lap joints
    Langfeng Zhu
    Wenjing Chen
    Xiaowu Hu
    Zezong Zhang
    Bin Chen
    Jue Wang
    Sifan Tan
    Xiongxin Jiang
    Journal of Materials Science: Materials in Electronics, 2024, 35
  • [45] SN-3.0AG-0.5CU COMPOSITE SOLDER REINFORCED BY MULTILAYER GRAPHENE
    Huang, Yilong
    Xiu, Ziyang
    Tian, Yanhong
    2016 CHINA SEMICONDUCTOR TECHNOLOGY INTERNATIONAL CONFERENCE (CSTIC), 2016,
  • [46] Corrosion behavior of Sn-3.0Ag-0.5Cu alloy under chlorine-containing thin electrolyte layers
    Liao, Bokai
    Cen, Hongyu
    Chen, Zhenyu
    Guo, Xingpeng
    CORROSION SCIENCE, 2018, 143 : 347 - 361
  • [47] Effect of solder volume on shear strength of Sn-3.0Ag-0.5Cu solder and Cu metallization
    School of Materials and Engineering, Harbin Institute of Technology, Harbin 150001, China
    不详
    J. Shanghai Jiaotong Univ. Sci., 2008, SUPPL. (149-152):
  • [48] Erratum to: Constitutive Behavior of Mixed Sn-Pb/Sn-3.0Ag-0.5Cu Solder Alloys
    J. P. Tucker
    D. K. Chan
    G. Subbarayan
    C. A. Handwerker
    Journal of Electronic Materials, 2012, 41 : 800 - 800
  • [49] Precise quantitative evaluation of nano-ordered intermetallic compounds in Sn-3.0Ag-0.5Cu lead-free solder bump by using TEM
    Lee, C-W
    Shin, Y-S
    Kim, J-H
    MULTI-FUNCTIONAL MATERIALS AND STRUCTURES, PTS 1 AND 2, 2008, 47-50 : 907 - 911
  • [50] Electromigration of 300 μm Diameter Sn-3.0Ag-0.5Cu Lead-Free Bumps in Flip Chip Package
    Ye, Song
    Huang, Mingliang
    Chen, Leida
    Liu, Xiaoying
    2010 11TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING (ICEPT-HDP), 2010, : 1132 - 1137
12345