Structure and Mechanical Properties of the Molybdenum–Steel Bimetal Fabricated by Hot Isostatic Pressing

被引：0
|
作者：
D. N. Makhina
V. N. Denisov
Yu. S. Perminova
V. N. Butrim
S. A. Nikulin
机构：
[1] JSC Kompozit,
[2] National University of Science and Technology MISiS,undefined
来源：
Russian Metallurgy (Metally) | 2019年 / 2019卷
关键词：
: bimetal; molybdenum alloy–corrosion-resistant steel welded joint; intermediate layers; diffusion welding; hot isostatic pressing; structure; strength;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Abstract—The structure and the ultimate tensile strength of the bimetallic joints of a TsM2A (Mo–Ti–Zr system) molybdenum alloy and a corrosion-resistant 12Kh18N10T steel are studied. These joints are formed by diffusion welding under hot isostatic pressing conditions using the following combined intermediate layers: vanadium–electrical sheet steel, vanadium–copper, and titanium–niobium–copper. The highest strength of the joint (419 MPa) is reached when a combination intermediate layer of titanium, niobium, and copper is used.
引用
收藏
页码：1031 / 1035
页数：4
相关论文
共 50 条
  • [41] Effect of hot isostatic pressing on mechanical properties of alumina-based ceramics
    Barinov, S.M.
    Ponomarev, V.F.
    Shevchenko, V.Ya.
    Ogneupory i Tekhnicheskaya Keramika, 1997, (01): : 8 - 11
  • [42] Effect of hot isostatic pressing on metallurgical and mechanical properties of A356 alloy
    Aybarc, Ugur
    Kara, Ali
    Cubuklusu, Halil Emre
    Ce, Omer Burak
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2017, 32 (04): : 1327 - 1335
  • [43] Mechanical properties of material jetted zirconia complex geometries with hot isostatic pressing
    Mummareddy, Bhargavi
    Negro, Dylan
    Bharambe, Vivek T.
    Oh, Yongduk
    Burden, Edward
    Ahlfors, Magnus
    Choi, Jae-Won
    Du Plessis, Anton
    Adams, Jacob
    MacDonald, Eric
    Cortes, Pedro
    ADVANCES IN INDUSTRIAL AND MANUFACTURING ENGINEERING, 2021, 3
  • [44] Tailoring porosity and mechanical properties of wire-based directed energy deposited molybdenum alloys through hot isostatic pressing
    Karim, Md Abdul
    Tanvir, Gazi
    Jadhav, Sainand
    Islam, Saiful
    Kim, Young-Min
    Villarraga-Gomez, Herminso
    Lee, Ho-Jin
    Jeon, Yongho
    Kim, Duck Bong
    APPLIED MATERIALS TODAY, 2025, 42
  • [45] Effect of hot isostatic pressing on the microstructures and mechanical properties of TiC/GTD222 composite fabricated by selective laser melting
    Lv, Yuting
    Liu, Yaojie
    Zhang, Qiang
    Yu, Hongyao
    Wang, Rui
    Sun, Guangbao
    Wei, Guijiang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 968
  • [46] Microstructure Evolution and Mechanical Properties of Ti-25Ta Alloy Fabricated by Selective Laser Melting and Hot Isostatic Pressing
    Pu, Yunna
    Zhao, Dewei
    Liu, Binbin
    Shi, Qi
    Li, Junlei
    Tan, Chong
    Shen, Zhengyan
    Xie, Huanwen
    Liu, Xin
    RARE METAL MATERIALS AND ENGINEERING, 2024, 53 (08) : 2123 - 2130
  • [47] The Structure and Mechanical Properties of WC–8 wt.% Co Hardmetal Produced by Cold and Hot Isostatic Pressing
    G. Ya. Akimov
    I. V. Andreev
    V. I. Sheremet
    I. Yu. Trosnikova
    P. I. Loboda
    T. O. Kosenchuk
    Powder Metallurgy and Metal Ceramics, 2022, 61 : 9 - 17
  • [48] Effect of Liquid Hot Isostatic Pressing on Structure and Mechanical Properties of a Sand-Cast A356.02 Alloy
    Damir Tagirov
    Elena Lashina
    Rustam Kaibyshev
    Metallurgical and Materials Transactions A, 2013, 44 : 2369 - 2381
  • [49] Effect of Liquid Hot Isostatic Pressing on Structure and Mechanical Properties of a Sand-Cast A356.02 Alloy
    Tagirov, Damir
    Lashina, Elena
    Kaibyshev, Rustam
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (05): : 2369 - 2381
  • [50] NEW MN-ZN FERRITE FABRICATED BY HOT ISOSTATIC PRESSING
    TAKAMA, E
    ITO, M
    IEEE TRANSACTIONS ON MAGNETICS, 1979, 15 (06) : 1858 - 1860
12345