Structure and Mechanical Properties of the Molybdenum–Steel Bimetal Fabricated by Hot Isostatic Pressing

被引：0
|
作者：
D. N. Makhina
V. N. Denisov
Yu. S. Perminova
V. N. Butrim
S. A. Nikulin
机构：
[1] JSC Kompozit,
[2] National University of Science and Technology MISiS,undefined
来源：
Russian Metallurgy (Metally) | 2019年 / 2019卷
关键词：
: bimetal; molybdenum alloy–corrosion-resistant steel welded joint; intermediate layers; diffusion welding; hot isostatic pressing; structure; strength;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Abstract—The structure and the ultimate tensile strength of the bimetallic joints of a TsM2A (Mo–Ti–Zr system) molybdenum alloy and a corrosion-resistant 12Kh18N10T steel are studied. These joints are formed by diffusion welding under hot isostatic pressing conditions using the following combined intermediate layers: vanadium–electrical sheet steel, vanadium–copper, and titanium–niobium–copper. The highest strength of the joint (419 MPa) is reached when a combination intermediate layer of titanium, niobium, and copper is used.
引用
收藏
页码：1031 / 1035
页数：4
相关论文
共 50 条
  • [31] Microstructural characterisation of molybdenum disilicide consolidated by hot isostatic pressing
    Bhatti, AR
    Barnett, MA
    ELECTRON MICROSCOPY AND ANALYSIS 1999, 1999, (161): : 455 - 458
  • [32] Effect of Powder Size on Microstructure and Mechanical Properties of 2A12Al Compacts Fabricated by Hot Isostatic Pressing
    Huang, Xina
    Lang, Lihui
    Wang, Gang
    Alexandrov, Sergei
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2018, 2018
  • [33] Effect of SiCw volume fraction on microstructure and properties of SiCw/Al composite fabricated by hot isostatic pressing-hot pressing
    Zhang, Xu
    Xu, Xiaojing
    Jiang, Ze
    Mao, Qiang
    Zhang, Tianci
    Cheng, Hao
    Liu, Qingjun
    Wang, Hao
    MATERIALS RESEARCH EXPRESS, 2019, 6 (11):
  • [34] Hot isostatic pressing influence on the mechanical properties of selectively laser-melted 316L steel
    Kluczynski, J.
    Sniezek, L.
    Grzelak, K.
    Ozieblo, A.
    Perkowski, K.
    Torzewski, J.
    Szachogluchowicz, I
    Gocman, K.
    Wachowski, M.
    Kania, B.
    BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES, 2020, 68 (06) : 1413 - 1424
  • [35] Mechanical properties of SiCpl/BAS fabricated by hot-pressing
    Gu, Jian-cheng
    Ye, Feng
    Li, Qi-ming
    Zhou, Yu
    Luen, Ting-quan
    Kuangye Gongcheng/Mining and Metallurgical Engineering, 1999, 19 (04): : 64 - 66
  • [36] Microstructure and properties of 316 L stainless steel prepared by hot isostatic pressing
    Wang, Jiwei
    Zeng, Jianmin
    Wei, Qingsong
    Shi, Yusheng
    Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition), 2012, 40 (10): : 53 - 57
  • [37] Diffusion bonding among hard alloy, tool steel, and alloy steel by hot isostatic pressing: Interfacial microstructure and mechanical properties
    Zheng, Haonan
    Cai, Chao
    Guo, Ruipeng
    Shi, Yusheng
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2024, 118
  • [38] Fabrication and mechanical properties of powder metallurgy tantalum prepared by hot isostatic pressing
    Kim, Youngmoo
    Kim, Eun-Pyo
    Noh, Joon-Woong
    Lee, Sung Ho
    Kwon, Young-Sam
    Oh, In Seok
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2015, 48 : 211 - 216
  • [39] Optimization of mechanical properties of castings in aluminum alloys with liquid hot isostatic pressing
    Cabibbo, M
    Evangelista, E
    Gallo, S
    Latini, V
    HOT DEFORMATION OF ALUMINUM ALLOYS III, 2003, : 399 - 410
  • [40] The manufacture and mechanical properties of dissimilar metal weldments produced by hot isostatic pressing
    Buchkremer, HP
    Tortorici, P
    Ennis, PJ
    Laha, K
    Stover, D
    EUROMAT 97 - PROCEEDINGS OF THE 5TH EUROPEAN CONFERENCE ON ADVANCED MATERIALS AND PROCESSES AND APPLICATIONS: MATERIALS, FUNCTIONALITY & DESIGN, VOL 1, 1997, : 645 - 648
12345